Re: Disaster Restore SBS2003

I am trying to restore Small Business Server 2003 that had all the latest
updates installed as of 1/1/08. However, I tried installing from the
original SBS2003 disk stopping with the "continue setup" after the server
rebooted. Installed necessary MB and NIC drivers. Installed SBS2003 SP1.
Restored from the full backup (backed up entire system with windows NT backup
including system state). For the restore I had it overwrite any files with
restored files and in the advanced screen - had all 4 lines checked as I read
in one of the discussions and the restore completed and seemed to go ok other
than the warning about restoring to a server that does not have exchange
running on it. But when I restarted the server, it will not boot but gives
me the error something like unable to load dll to HAL or something like that
- I thought I was missing another update relase but how do I get them if I
cannot connect the server to the internet until I get it restored. I trying
one more time from scratch right now. If you have any more suggestions, they
would be greatly appreciated!! Thanks.

"Larry Struckmeyer" wrote:

Also, there is the following, with is worth reviewing if you have not
already:

download.microsoft.com/download/b/d/8/bd8e1a40-d202-429a-8eb7-26300d62bcc9/BKU_BkupRstr.doc

--
Larry


"Larry Struckmeyer" <lstruckmeyer(at)mis-wizards(dot)com> wrote in message
news:%23SgsT$KUIHA.1188@xxxxxxxxxxxxxxxxxxxxxxx
Good catch Merv!

I missed the SBS part of John's reply.

--
Larry

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:eDac18KUIHA.3940@xxxxxxxxxxxxxxxxxxxxxxx
John... you're looking for Windows 2003 SP2. SBS 2003 SP2 doesn't exist.
(See Larry's link).

Options:

Windows 2003 SP1 + SBS 2003 SP1
Windows 2003 SP2 + SBS 2003 SP1
Windows 2003 SP1 + SBS 2003 SP1, then install Windows 2003 SP2


IE in High Security Mode: add "*.microsoft.com" (no quotes) to trusted
sites on the server or download Windows 2003 SP2 from a workstation.

--
Merv Porter [SBS-MVP]
============================

"John C." <JohnC@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5F537F85-4DF9-4D8F-A017-E23FA3C98D25@xxxxxxxxxxxxxxxx
I've looked all over Microsoft site (except the right place) where can I
go
to download SBS2003 SP2 on a separate computer than the server (ie at
home)?
Also, I tried adding microsoft update to the trusted sites with the box
unchecked and all I get is the IE site - cannot find web page. If I
just
open IE I get the message that IE is in "high security mode". when I
check
the status - it says connected. Here is my setup:

Windows IP Configuration



Host Name . . . . . . . . . . . . : aahserver

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Realtek RTL8169/8110 Family
Gigabit
Ethernet NIC

Physical Address. . . . . . . . . : 00-0C-76-99-20-0C

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.16.2

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . :

DNS Servers . . . . . . . . . . . : 192.168.16.2



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Linksys EG1032 v2 Instant Gigabit
Network Adapter

Physical Address. . . . . . . . . : 00-0C-41-1A-72-A9

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.25

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.16.2

NetBIOS over Tcpip. . . . . . . . : Disabled



"Larry Struckmeyer" wrote:

As I remember this, you need only the Windows Service Packs. Not
updates, not application updates or service packs. You should be able
to connect a computer to the internet and pull down Windows SP2, if
that is what you are missing.

--
Larry

"Cris Hanna [SBS-MVP]" <crisnospamhanna@xxxxxxxxxxxxxxxxxxxxx> wrote
in message news:eSc3lIJUIHA.1208@xxxxxxxxxxxxxxxxxxxxxxx
you can add that sight to the trusted sites and uncheck the box to
require https:

--
Cris Hanna [SBS - MVP]
-----------------------------------------------------------
MVPs Do Not Work for Microsoft
Please do not contact me directly regarding issues
"John C." <JohnC@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:145FED27-0C5E-4F01-98FC-3579CA3C33E0@xxxxxxxxxxxxxxxx
I had to resize the partitions on my RAID1 array and now I cannot
get the
backup restored. I followed the article I found in other threads
but I am
having a major problem. I have reinstalled SBS to the point the
server
restarts and wants me to continue setup. I canceled out of that
and
installed drivers for the MB and 2nd NIC which shows connected but
I cannot
access the internet because IE is in "high security mode" and will
not allow
access to any site that is not https: which update.microsoft is not
so how do
I get SBS to update to the same level as my backup when I cannot
connect to
the update site? I have disks for sp1 which I installed but I
cannot get any
more updates until I connect to the update web site. I tried
restoring
without the updates and it does not work very well







.

Relevant Pages

  • Re: Disaster Restore SBS2003
    ... If you had the server set to download updates automatically (never ... then install any service packs to return the server to the same service pack ... have the correct version of NTBackup prior to the restore. ...
    (microsoft.public.windows.server.sbs)
  • Re: Server 2003 R2 SP1 wacked after updates. Should I restore system state?
    ... Will a system state restore put the DLL's, registry settings, and AD ... screwed the server up. ... We use all updates coming with WSUS and some small test before without any ...
    (microsoft.public.windows.server.general)
  • Re: Please help with external USB MP3 player in XP Pro
    ... I had already done the restore system setting and no luck. ... installing the software is unnecessary for the drive to be ... >> software, updates to Media Source, and again, quite a number of things. ...
    (microsoft.public.windowsxp.general)
  • Re: A2K on 2003 Server
    ... We installed the Office updates right after you suggested doing so. ... We just upgraded our NT server to 2003. ... Since installing on the new server, about every 4th or 5th time the ...
    (microsoft.public.access.modulesdaovba)
  • Re: Please help with external USB MP3 player in XP Pro
    ... installing the software is unnecessary for the drive to be ... Restore to a point prior to the initial installation. ... > the firmware to the newest one, ... > software, updates to Media Source, and again, quite a number of things. ...
    (microsoft.public.windowsxp.general)