Re: Disaster Restore SBS2003

Good catch Merv!

I missed the SBS part of John's reply.

--
Larry

"Merv Porter [SBS-MVP]" <mwport@xxxxxxxxxxxxxxxxxxx> wrote in message
news:eDac18KUIHA.3940@xxxxxxxxxxxxxxxxxxxxxxx
John... you're looking for Windows 2003 SP2. SBS 2003 SP2 doesn't exist.
(See Larry's link).

Options:

Windows 2003 SP1 + SBS 2003 SP1
Windows 2003 SP2 + SBS 2003 SP1
Windows 2003 SP1 + SBS 2003 SP1, then install Windows 2003 SP2


IE in High Security Mode: add "*.microsoft.com" (no quotes) to trusted
sites on the server or download Windows 2003 SP2 from a workstation.

--
Merv Porter [SBS-MVP]
============================

"John C." <JohnC@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5F537F85-4DF9-4D8F-A017-E23FA3C98D25@xxxxxxxxxxxxxxxx
I've looked all over Microsoft site (except the right place) where can I
go
to download SBS2003 SP2 on a separate computer than the server (ie at
home)?
Also, I tried adding microsoft update to the trusted sites with the box
unchecked and all I get is the IE site - cannot find web page. If I just
open IE I get the message that IE is in "high security mode". when I
check
the status - it says connected. Here is my setup:

Windows IP Configuration



Host Name . . . . . . . . . . . . : aahserver

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Unknown

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No



Ethernet adapter Local Area Connection:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit
Ethernet NIC

Physical Address. . . . . . . . . : 00-0C-76-99-20-0C

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.16.2

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . :

DNS Servers . . . . . . . . . . . : 192.168.16.2



Ethernet adapter Local Area Connection 2:



Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Linksys EG1032 v2 Instant Gigabit
Network Adapter

Physical Address. . . . . . . . . : 00-0C-41-1A-72-A9

DHCP Enabled. . . . . . . . . . . : No

IP Address. . . . . . . . . . . . : 192.168.1.25

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : 192.168.1.1

DNS Servers . . . . . . . . . . . : 192.168.16.2

NetBIOS over Tcpip. . . . . . . . : Disabled



"Larry Struckmeyer" wrote:

As I remember this, you need only the Windows Service Packs. Not
updates, not application updates or service packs. You should be able
to connect a computer to the internet and pull down Windows SP2, if that
is what you are missing.

--
Larry

"Cris Hanna [SBS-MVP]" <crisnospamhanna@xxxxxxxxxxxxxxxxxxxxx> wrote
in message news:eSc3lIJUIHA.1208@xxxxxxxxxxxxxxxxxxxxxxx
you can add that sight to the trusted sites and uncheck the box to
require https:

--
Cris Hanna [SBS - MVP]
-----------------------------------------------------------
MVPs Do Not Work for Microsoft
Please do not contact me directly regarding issues
"John C." <JohnC@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:145FED27-0C5E-4F01-98FC-3579CA3C33E0@xxxxxxxxxxxxxxxx
I had to resize the partitions on my RAID1 array and now I cannot
get the
backup restored. I followed the article I found in other threads
but I am
having a major problem. I have reinstalled SBS to the point the
server
restarts and wants me to continue setup. I canceled out of that and
installed drivers for the MB and 2nd NIC which shows connected but I
cannot
access the internet because IE is in "high security mode" and will
not allow
access to any site that is not https: which update.microsoft is not
so how do
I get SBS to update to the same level as my backup when I cannot
connect to
the update site? I have disks for sp1 which I installed but I
cannot get any
more updates until I connect to the update web site. I tried
restoring
without the updates and it does not work very well




.

Relevant Pages

  • Re: Still cant connect to RWW or OWA remotely
    ... In the Services MMC, is the Windows ... Firewall/Internet Connection Sharing service 'Disabled'? ... "Windows Firewall cannot run because another ... it certainly appears to be something about the SBS configuration. ...
    (microsoft.public.windows.server.sbs)
  • RE: VPN Authentication problems (unable to connect to the network using the user name and password y
    ... VPN following the below steps or manually create VPN to SBS from My Network ... Communications and Remote Desktop Connection? ... Are they using Windows XP SP2? ... For managing the Windows XP SP2 firewall under SBS network, ...
    (microsoft.public.windows.server.sbs)
  • Re: Small Business Server Windows Firewall
    ... I am always loathe to edit the SBS default policies but this may be a case ... My normal GP changes are items in addition to SBS ... Sent from Windows Mail running on Windows Vista Ultimate Post RC1 ... 'Domain Profile' comes into effect upon connection of the VPN). ...
    (microsoft.public.windows.server.sbs)
  • Re: New Single NIC Problem
    ... I presume your internet connection comes into a hub or switch, ... server and client computers are connected there as well, ... Les Connor [SBS Community Member - SBS MVP] ... > Windows IP Configuration ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Access Wizard
    ... SecureNat/Nat and Outlook clients not working after installing Windows ... Service Pack 2 in SBS 2003 Premium ... you might want to uninstall Windows 2003 SP2: ...
    (microsoft.public.windows.server.sbs)