Cannot connect to Server

Recently we shifted offices. I have an SBS2003 server Dell PowerEdge 830 with
1 network adapter connecting through a router ADSL and whats changed was the
router and now we are using cable DSL.
Previously, the router had the DHCP enabled. It worked fine till now.
Now the Server cannot be part of the network, cannot be pinged (strange -
when I am booting up the server, the ping replies till the network connection
are being set and after the ping just timed out)
I was going through the posts of similar problems and had DHCP service
started up with the scope on the server and disabled the router DHCP
However this still doesnot work and the server cannot still join the network
and access the internet

This is my ipconfig/all details

Windows IP Confiiguration
Host Name - SBS2003
Primary Dns Suffox - EurekaTravel.local
Node Type - Unknown
IP Routing Enabled - Yes
WINS Proxy Enable - Yes
DNS Suffix Serach List - EurekaTravel.local

Ethernet adapter Server Local Area Connection :
Connection-specific DNS Suffix
Description - Broadcom NetXtreme Gigabit Ethernet
Physical Adress - 00-15-C5-5E-CD-FC
DHCP Enable - No
IP Address - 10.10.10.3
Subnet Mask - 255.255.255.0
Default Gateway - 10.10.10.2
DNS Server - 10.10.10.3
Primary WINS Server - 10.10.10.3

Hope somebody can give me ideas of how to solve this problem!

Thanks

ET



.

Relevant Pages

  • Re: Cant Connect Computers
    ... the router manaully. ... You only have a single NIC in the SBS server. ... you must rely on a firewall device to protect your network. ... When I run the internet connection wizard, it tells me that a Universal ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Cant Connect Computers
    ... the router manaully. ... You only have a single NIC in the SBS server. ... you must rely on a firewall device to protect your network. ... When I run the internet connection wizard, it tells me that a Universal ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Connection from remote computer to network SQL Server
    ... I tried making the SQL machine a "trusted" on the router. ... data source and the server you want to connect to. ... a long pause before a screen comes up telling me the connection has failed ... It's also a good idea to add Network Library=DBMSSOCN; ...
    (microsoft.public.access.adp.sqlserver)
  • Re: Outgoing POP3 email missing/lost/not received
    ... Funny thing is that I have had this ISP for 8 years and it has always been ... It looks like when you last ran CEICW, you set the ISP's mail server to: ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • RE: Cannot Connect via remote desktop
    ... Again if I put the url vpn.xxxxx.co.uk it takes me straight to the router ... Two network adapters - UPnP router connection to broadband ... Before you run the Configure E-mail and Internet Connection Wizard, ... Click to clear the My server uses a single network connection for both ...
    (microsoft.public.windows.server.sbs)