Re: Please help with my lack of understanding

I'm not quite sure what exactly you're trying to accomplish. But the addresses for NIC2 (192.168.0.2) and NIC3 (192.168.0.3) are on the same subnet with any halfway appropriate netmask I can assume you're using. I can't see how the SBS box can properly route PCs hanging off of these two NICs. This setup might work if the SBS box was simply a client computer on the network, and the routing was done with something else.

Since these computers all seem to be on the same subnet, why don't you just plug them all into the same switch?

Can you lay out this network so that we can see what you're trying to do?

CL

"t.kinser" <t.kinser.31evvf@xxxxxxxxxxxxx> wrote in message news:t.kinser.31evvf@xxxxxxxxxxxxxxxx

Alright. I hope I have a simple issue for those far more knowledgeable
then I.

I, of course, am running SBS and now my issue.

I wish to share internet over multiple nics, simple 'eh?

My setup.

I have nic 1, nic 2, and nic3. Nic 1 is coming in from cable modem and
is set dhcp. Nic 2 is sharing to the network with a static IP of
192.168.0.1. Nic 3 is supposed to share the network as well, for a
different set of computers and is set with the static IP of
192.168.0.2

I have my dhcp range set from 192.169.0.3 to 192.168.0.150. Using the
built in 'setup your internet' wizard I was able to share the internet
to Nic2 (192.168.0.1) and all the computers going through the hub to
that nic can successfully go online. Now how do I setup nic3
(192.168.0.2) to share the internet as well? I can't run the wizard
obviously without destroying the working network. So where are the
settings and how do I find them as well as set them. I have no right
working on a SBS and I'm in way too far over my head. Please help if
you can, thank you.

Oh, a bit of information. The computers that connect through
192.168.0.2 do grab an ip in the correct range without a problem, but
see the dhcp as 192.168.0.1.


--
t.kinser
------------------------------------------------------------------------
t.kinser's Profile: http://forums.techarena.in/member.php?userid=37008
View this thread: http://forums.techarena.in/showthread.php?t=869120

http://forums.techarena.in


.

Relevant Pages

  • Re: Boot-up question on SBS2K3
    ... > The router separates you from the Internet. ... > network. ... >>>> 2 Nics, broadband cable modem connected into the external NIC, ...
    (microsoft.public.windows.server.sbs)
  • Re: No files showing
    ... On the wireless I can pick up the network, get on the internet but I can't ... Let's start by looking at "ipconfig /all" from both computers. ... The router is a Dlink 524, ...
    (microsoft.public.windowsxp.network_web)
  • Re: No files showing
    ... On the wireless I can pick up the network, get on the internet but I can't ... Let's start by looking at "ipconfig /all" from both computers. ... Dell and I could not connect to the internet from the main computer. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Client PC cannot access internet
    ... Server can access the internet. ... Ethernet adapter Local Area Network: ... Have you checked the binding order of the NICs? ... the Internet Connection Wizard and enabled RAS. ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: No files showing
    ... On the wireless I can pick up the network, get on the internet but I can't ... Let's start by looking at "ipconfig /all" from both computers. ... Dell and I could not connect to the internet from the main computer. ...
    (microsoft.public.windowsxp.network_web)