Please help with my lack of understanding


Alright. I hope I have a simple issue for those far more knowledgeable
then I.

I, of course, am running SBS and now my issue.

I wish to share internet over multiple nics, simple 'eh?

My setup.

I have nic 1, nic 2, and nic3. Nic 1 is coming in from cable modem and
is set dhcp. Nic 2 is sharing to the network with a static IP of
192.168.0.1. Nic 3 is supposed to share the network as well, for a
different set of computers and is set with the static IP of
192.168.0.2

I have my dhcp range set from 192.169.0.3 to 192.168.0.150. Using the
built in 'setup your internet' wizard I was able to share the internet
to Nic2 (192.168.0.1) and all the computers going through the hub to
that nic can successfully go online. Now how do I setup nic3
(192.168.0.2) to share the internet as well? I can't run the wizard
obviously without destroying the working network. So where are the
settings and how do I find them as well as set them. I have no right
working on a SBS and I'm in way too far over my head. Please help if
you can, thank you.

Oh, a bit of information. The computers that connect through
192.168.0.2 do grab an ip in the correct range without a problem, but
see the dhcp as 192.168.0.1.


--
t.kinser
------------------------------------------------------------------------
t.kinser's Profile: http://forums.techarena.in/member.php?userid=37008
View this thread: http://forums.techarena.in/showthread.php?t=869120

http://forums.techarena.in

.

Relevant Pages

  • Re: Please help with my lack of understanding
    ... I can't see how the SBS box can properly route PCs hanging off of these two NICs. ... This setup might work if the SBS box was simply a client computer on the network, and the routing was done with something else. ... Since these computers all seem to be on the same subnet, why don't you just plug them all into the same switch? ... I wish to share internet over multiple nics, ...
    (microsoft.public.windows.server.sbs)
  • Re: Providing Internet Access to Three PCs in Workgroup
    ... I need to place these computers ... > Internet using existing modem/router hardware. ... I know that this multihomed configuration is ... the extra NICs and all is working, ...
    (microsoft.public.win2000.networking)
  • Re: Providing Internet Access to Three PCs in Workgroup
    ... >> I have three standalone computers accessing Internet ... I know that this multihomed configuration is ... >the extra NICs and all is working, ...
    (microsoft.public.win2000.networking)
  • Sharing interntet connection among "2 networks"
    ... We have 2 areas with 4-5 computers in each. ... area are connected to the Internet via a central computer with 2 NICs ... which is set to 191.168.0.1 due to connection sharing process. ...
    (microsoft.public.windowsxp.general)
  • Re: 2 Nics or 1?
    ... >> with 2 Nics, one internal and one for the internet through a DSL modem. ... >> We are also running SBS 2003 Prem. ... >> they want to remove ISA server because it's too much overheard. ...
    (microsoft.public.windows.server.sbs)
Loading