Re: Trouble getting RWW from "outside."

Right. In your router, port 4125 (RWW) and SSL port 443 are forwarded to
the external NIC of the SBS server. Then run CEICW, enable the firewall,
select your services (including RWW), complete the Web Server Certificate
and complete the rest of CEICW.

If you donlt have ISA 2004 installed yet, after you do install, rr-run
CEICW, enable the firewall, and complete the rest of CEICW so that ISA is
set up properly by CEICW.

CEICW Walkthrough
http://www.sbs-rocks.com/sbs2k3/sbs2k3-n2.htm

If you set up the Web Server Certificate with your WAN IP address, you would
access RWW via Internet Explorer by typing:

https://<yourWANIPaddress>/remote

(I'm assuming that you have a static WAN IP address that is going to
change).

--
Merv Porter [SBS-MVP]
============================

"Jim Graue" <JimGraue@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:886E9E13-067C-47AD-A697-BCC821D23821@xxxxxxxxxxxxxxxx
Hi, Merv:

My replies/comments are in-line, below:

"Merv Porter [SBS-MVP]" wrote:

Hi Jim,

As Steve said, don't use VPN for RWW. And for the RWW error, try this KB
article:

So, my router would forward all requests for the RWW port (I don't know
which it is, but it's been referenced several times in this newsgroup; I
feel
certain I can find it) to the "outside" IP of the SBS? When I install ISA
2K4, I would need to ensure that said port was being forwarded to the
external NIC, right?

Error message when you try to access the Remote Web Workplace in Windows
Small Business Server 2003: "You are not authorized to view this page
http://support.microsoft.com/default.aspx?scid=kb;en-us;925653

I'll take a look right away. Thanks for the info.

--
Best regards,

Jim Graue


.

Relevant Pages

  • Re: RWW via VPN only partially working
    ... See the "CEICW Walkthrough" link I posted: ... It will show you the screen for Web Server Certificate creation. ... RWW or a straight RDC session (without connecting the hard ... Make sure ports 4125 and 443 are forwarded to your SBS NIC (or your SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 and self signed SSL certificate
    ... When you re-ran CEICW, did you select "enable" on the ... the Remote Web Workplace service? ... Then create the Web Server Certificate ... If I ignore the cert error after a few clicks I can get in and run RWW ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... If I run RWW from my PC within the network using our FQDN it works ... Have you run CEICW and enabled the firewall, ... Internet Security and Acceleration Server ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... If you mean that you used the above as the cert in the CEICW, ... Ethernet adapter Server LAN Connection: ... all the installed sbs features including RWW. ... eth0 169.254.243.18/16 Auto none ...
    (microsoft.public.windows.server.sbs)
  • Re: Internet connection wizard always fails on firewall (urgent)
    ... I've now uninstalled ISA 2000 again and run the CEICW again in an attempt to ... get internet access using the basic firewall. ... > the RWW was working fine but only internally. ...
    (microsoft.public.windows.server.sbs)