Re: Two nic setup right / How do see if it is secure

HI Larry

Thats escatly how it is. Internet works but when I try to http to the router
it does not work. Any ideas, I ran IE setup again

"Larry Struckmeyer" wrote:

Hi Toxic:

The router should be in the same network as the external nic.

That is, if the nic is: 10.57.201.100 / 255.255.255.0
The router should be: 10.57.201.1 / 255.255.255.0

--
Larry

"Toxic" <Toxic@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:71C57B44-7AD6-4E03-A380-794C6E1098C2@xxxxxxxxxxxxxxxx
Thanks a mill
Now that I have changed the subnet to 255.255.255.0 I cannot connect to
the
adsl 10.57.201.1, but I can go out to the internet.

"Claus" wrote:

The WAN NIC can either be connected to the ADSL direct or the same switch
that you ADSL modem is connected to (not the switch where the LAN NIC and
the computers are connected to).

--
Claus
"Toxic" <Toxic@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6D1CB3B5-DF04-4443-ADFF-6DC0D62A5C88@xxxxxxxxxxxxxxxx
OK last one should the second nic be connected directly to the adsl or
can
it
be connected to the switch and the adsl to the switch.


"Claus" wrote:

This will not work because your internal and external nic are in the
same
subnet.
Given that you are running SBS it is very unlikely that you need to
support
a network that needs over 1000 IP addresses. Change you subnet mask to
255.255.255.0 on both nics and you will be fine.

--
Claus
"Toxic" <Toxic@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:C847CFCC-1956-4A2D-82DF-3969CCF989C0@xxxxxxxxxxxxxxxx
Can some one tell me if this is correct. How do I test that the flow
of
traffic is correct
SBS 2k3 sp2 / two nics / dsl modem router all connected to a gig
switch

Internal nic
10.57.200.2
255.255.252.0
no gateway
dns - 10.57.200.2
wins 10.57.200.2

external nic
10.57.201.5
255.255.252.0
gateway 10.57.201.1
dns 10.57.200.2
wins blank

ADSL Modem Router
10.57.201.1
255.255.252.0

workstations
10.57.200.x
255.255.252.0
Gateway 10.57.200.2
DNS 10.57.200.2
Wins 10.57.200.2









.

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... Both NICs should point to his internal IP for DNS. ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... it's quite possible you misconnected the nics when you put the server ... just File and Printer Sharing and the Microsoft Client ... running the internet connection wizard, ... I wonder if I may have missed a firewall setting on the router as well. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... Both NICs should point to his internal IP for DNS. ... You should give your SBS a fixed external address so you can forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
  • Re: Boot-up question on SBS2K3
    ... > The router separates you from the Internet. ... > network. ... >>>> 2 Nics, broadband cable modem connected into the external NIC, ...
    (microsoft.public.windows.server.sbs)
  • Re: Boot-up question on SBS2K3
    ... SBS External NIC ... The router separates you from the Internet. ... >>> 2 Nics, broadband cable modem connected into the external NIC, internal ...
    (microsoft.public.windows.server.sbs)
Loading