Re: VPN Ports to Open

Tech-Archive recommends: Fix windows errors by optimizing your registry

Mail TCP/25
Companyweb TCP/444
RWW, OWA TCP/443
RWW TCP/4125

PPTP VPN TCP/1723 *and* IP protocol 47 (GRE)

Netgear does both with "PPTP Service", other manufacturers often use
something similar. Very few actually allow individual IP protocols to be
specified.


I setup the PPTP Service, but still to no avail. Is there a way to
"test" if protocol 47 is open?

I know what is going to happen. I'm going to get this working 1 day
before the replacement router gets here. (grin)

Thanks again for the help
Guy
.

Relevant Pages

  • Re: MSDE install faile (faile to configure server)
    ... settings on the protocols and login modes back to where you want them. ... and your folder is gone before trying to install. ... Usually this sort of setup is fairly foolproof regardless of the ... > Server, ...
    (microsoft.public.sqlserver.msde)
  • RE: ISA access
    ... the ISA client. ... I have it setup so users can ... but I also setup rules that allow all protocols originated by ... > Why would they box deny me access? ...
    (microsoft.public.isa.configuration)
  • Re: XP notebooks slow to login when not on LAN
    ... Thanks for the response but our DNS server is setup like you suggest on your ... The problem is really when the notebooks have a network connection that is ... > Check for gratuitous protocols, that will cause excessive network traffic, too. ...
    (microsoft.public.windowsxp.network_web)
  • Re: universal remote control standards
    ... a standard available that provides protocols and codes used by ... manufacturers. ...
    (sci.electronics.design)
  • Re: What is an Infra Red "Device Code"?
    ... There are a limited number of IR protocols which is ... there are the individual codes the manufacturers assign to each ... the NEC protocol to send RF with its handheld remotes. ... folowed the same IR command for "channel up", ...
    (comp.home.automation)