Re: Users lose connection to the server after several hours

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Run the following command in the CMD window:
net time /setsntp
"0.us.pool.ntp.org,1.us.pool.ntp.org,2.us.pool.ntp.org,3.us.pool.ntp.org"
(there are NO spaces within the quotation mark text)
Then run:
net time /querysntp (to confirm the new setting)
Then run:
net time /set

--
Claus
"camilo" <camilo@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:819ED84D-E4F5-406B-A316-FAEAA6EA2488@xxxxxxxxxxxxxxxx
Hi Claus,
The error is as follows:
Event Type: Error
Event Source: W32Time
Event Category: None
Event ID: 29
Date: 13/11/2007
Time: 02:33:14 p.m.
User: N/A
Computer: SERVIDOR
Description:
"The time provider NtpClient is configured to acquire time from one or
more
time sources, however none of the sources are currently accessible. No
attempt to contact a source will be made for 960 minutes. NtpClient has no
source of accurate time".


"Claus" wrote:

What is the exact error (description, EventID, source)?

--
Claus
"camilo" <camilo@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:BD723A2F-A131-49A0-BCA7-83FDDE1E79FB@xxxxxxxxxxxxxxxx
Hi Claus, thanks for your answer.
I have installed the sbs win2003 three times and always happens this
problem.

Checking the Event Viewer found that there is a common mistake W32Time.
I
must confirm that Windows Time Service or another NTP Time Service is
running
and available on the source system.


I'll try to focus on this...Thank you!

"Claus" wrote:

What errors do you see in the event logs? When the users cannot
connect
any
longer, can you log into the console without problems? If this always
happens at the same time, check if there is any program that is
scheduled
to
start at that time.

--
Claus
"camilo" <camilo@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0FA9E6E0-413A-42B4-8AC0-3CF35FD8D09D@xxxxxxxxxxxxxxxx
Hi,
The problem is that when users have worked ten hours lost connection
to
the
server win 2003 sb R2.
Then I have to restart the server so that users can work again.
This happens every day at the same time.

I thank all the people who can help me








.

Relevant Pages

  • Re: Windows Time Service
    ... The only NET TIME command involved for constant ... used for the time service, if it isn't configured it will use the automatically ... the domain PDC will get it time from the forest root domain PDC. ... get the time from some outside time source such as a router or external time server. ...
    (microsoft.public.win2000.active_directory)
  • Re: Configuring w32time
    ... I saw some odd behavior when using net time to configure the Windows Time service. ... I found out that there were issues with using net time and the supported method for WS03 and later was w32tm.exe. ... Actually the registry is from one pc with xp not the server. ... To configure the Time Service domain controller holding the PDC Emulator Role, follow these steps to be only performed domain controller holding the PDC Emulator Role: ...
    (microsoft.public.windows.server.active_directory)
  • Re: NTP client on workstations
    ... Have a look at the services and the SBS 2k3 server. ... time service is set to automatic and is started. ... You can change the time source on the server by using net time /setsntp:IPof ...
    (microsoft.public.windows.server.sbs)
  • Re: Time synchronized problem
    ... you can use the NET TIME cmd from cmdline to check which server is providing time for that specific machine. ... The problem is that the servers and computers cannot resolve the ... different that have the time service I think, but I don't know 100 per cent. ...
    (microsoft.public.windows.server.active_directory)
  • Re: W32Time Error and Event ID 29
    ... Reconfigure your list. ... Open a cmd window and type: ... hit enter and you are done. ...
    (microsoft.public.windows.server.sbs)