RE: SBS2003 Premium and ISA2004 SP3 FTP and POP3 problems

Hello Ronnie,

Thank you for your email.

The IP configuration on client and SBS are properly.

First, please let me know what do you mean by "all clients have ISA
firewall client installed and it seems to be working"? Does the workstation
which install ISA firewall client can access FTP?

Based on my research, I suggest we try the following steps:

1. Please install ISA server 2004 sp3 on ISA to see if it help:
Microsoft? Internet Security and Acceleration (ISA) Server 2004 Standard
Edition Service Pack 3
http://www.microsoft.com/downloads/details.aspx?FamilyId=A05A074A-5033-4792-
AF8B-58B90D841436&displaylang=en

2. Please contact your SBS hardware vendor to get the latest driver of the
SBS 2 NICs, and upgrade the driver on SBS to see if it help.

3. This is a known issue if you use Tunix firewall before ISA server 2004.
If this is in cause, please create the following access rule in ISA:

Please open the ISA management console, navigate to Firewall Policy, right
click "Firewall Policy" and click New->Access Rule, then create a new
access rule as following:

Rule name: allow inbound FTP traffic

Rule Action: Allow

Protocols: All Outbound Traffic

Sources: 192.168.2.1

Destination: Local Host

User Sets: All Users

Then move this rule to the top and click Apply to save all the settings.

4. If the ISA MTU size is not equal to the upstream router/firewall may
cause this issue. I suggest you enable ISA MTUDiscovery to see if it help:

a. Click Start, click Run, type regedit, and then click OK.

b. In Registry Editor, locate and then click the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

c. Right-click the EnablePMTUDiscovery entry.

d. On the Edit menu, click Modify, and then type 1 in the Value date box.

e. Quit Registry Editor.

For more information:
905179 You may experience a long delay when you try to use Internet
Explorer to access a redirected Web page and Internet Explorer uses ISA
Server 2004 as a Web proxy server
http://support.microsoft.com/default.aspx?scid=kb;EN-US;905179

5. If it probably, please connect one laptop or client computer or SBS to
your ISP directly, bypass your router. Does the FTP access work fine?

If we cannot resolve the issue after we perform the above steps, please
help me collect some information for further investigation:

1. Please try to access FTP thru IE on client and SBS. Gather screenshots
when this issue occurs. Send the screenshots to me.

2. Does this issue occurs on all internet FTP site.

3. Gather MPS network report on SBS:

a. Download MPSrepot_network from
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd9
15706/MPSRPT_NETWORK.EXE

b. Run MPSRPT_NETWORK.exe on the server box.

c. The tool will automatically collect the information. This procedure will
take 10~15 minutes.

d. Open Windows Explorer, navigate to the folder:
%SystemRoot%\MPSReports\Network\Reports\Cab\

e. Send the .cab file directly to me at v-terliu@xxxxxxxxxxxxx

I hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| X-Tomcat-ID: 130849136
| References: <FF1A4C4C-04A3-4E40-9D7E-AC9215BF4CF9@xxxxxxxxxxxxx>
<doXogPuGIHA.5204@xxxxxxxxxxxxxxxxxxxxxx>
<66C9FFFE-CC92-4F41-928F-71C83F8A68DB@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain
| Content-Transfer-Encoding: 7bit
| From: v-terliu@xxxxxxxxxxxxxxxxxxxx (Terence Liu [MSFT])
| Organization: Microsoft
| Date: Wed, 31 Oct 2007 11:52:30 GMT
| Subject: RE: SBS2003 Premium and ISA2004 SP3 FTP and POP3 problems
| X-Tomcat-NG: microsoft.public.windows.server.sbs
| Message-ID: <EIcHHS7GIHA.7444@xxxxxxxxxxxxxxxxxxxxxx>
| Newsgroups: microsoft.public.windows.server.sbs
| Lines: 480
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:72909
| NNTP-Posting-Host: tomcatimport2.phx.gbl 10.201.218.182
|
| Hello Ronnie,
|
| Thank you for update.
|
| From the ISA log, I found the following error:
|
| 192.168.0.14 POUNDSFORD\rvk Mozilla/4.0 (compatible; MSIE 7.0; Windows NT
| 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30) Y
| 10/30/2007 20:02:25 w3proxy POUNDSFORD1 - ftp.microsoft.com
207.46.236.102
| 21 127843 2062 - ftp TCP GET ftp://ftp.microsoft.com/ - Inet 10054 0x0
SBS
| Internet Access Rule Req ID: 2f540322 Internal External 0x86 Failed
|
| POUNDSFORD1 10/30/2007 19:57:27 TCP 192.168.0.14:4215 207.46.236.102:21
| 192.168.0.14 Internal External Terminate 0x80074e24 SBS Internet Access
| Rule FTP N 43 43 212 212 16656 16469 - - - - POUNDSFORD\rvk
| filezilla.exe:3:5.1 9 74 - - -
|
| Based on my research on the error code, I think this is a know network
| issue after install windows server 2003 sp2 on SBS 2003. I suggest you
try
| to install the following hotfix on SBS:
|
| You may experience network-related problems after you install Windows
| Server 2003 SP2 or the Scalable Networking Pack on a Windows Small
Business
| Server 2003-based computer
| http://support.microsoft.com/?id=936594
|
| If the issue persists, please verify the steps about disable "Require all
| users to authenticate" option:
| Please open the ISA2004 Management Console, in the left panel, expand to
| Configuration->Networks. Under "Networks panel", double click "Internal".
| Switch to "Web Proxy" panel, click "Authentication" button and then
uncheck
| the "Require all users to authenticate" option. Then click the Apply
button
| to save the changes.
|
| If we cannot resolve the issue after we perform the above steps, please
| help me collect some information for further investigation:
|
| 1. Does this issue happen on all clients?
|
| 2. Can you access external FTP on SBS?
|
| 3. Run command "ipconfig /all > c:\ipconfig_sbs.txt" and "route print >
| c:\route_sbs.txt" on SBS, send the files c:\ipconfig_sbs.txt and
| c:\route_sbs.txt to me at v-terliu@xxxxxxxxxxxxx
|
| 4. Run command "ipconfig /all > c:\ipconfig_client.txt" and "route print

| c:\route_client.txt" on problematic client, send the files
| c:\ipconfig_client.txt and c:\route_client.txt to me at
| v-terliu@xxxxxxxxxxxxx
|
| I hope these steps will give you some help.
|
| Thanks and have a nice day!
|
| Best regards,
|
| Terence Liu(MSFT)
|
| Microsoft CSS Online Newsgroup Support
|
| Get Secure! - www.microsoft.com/security
|
| =====================================================
| This newsgroup only focuses on SBS technical issues. If you have issues
| regarding other Microsoft products, you'd better post in the
corresponding
| newsgroups so that they can be resolved in an efficient and timely
manner.
| You can locate the newsgroup here:
| http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
|
| When opening a new thread via the web interface, we recommend you check
the
| "Notify me of replies" box to receive e-mail notifications when there are
| any updates in your thread. When responding to posts via your newsreader,
| please "Reply to Group" so that others may learn and benefit from your
| issue.
|
| Microsoft engineers can only focus on one issue per thread. Although we
| provide other information for your reference, we recommend you post
| different incidents in different threads to keep the thread clean. In
doing
| so, it will ensure your issues are resolved in a timely manner.
|
| For urgent issues, you may want to contact Microsoft CSS directly. Please
| check http://support.microsoft.com for regional support phone numbers.
|
| Any input or comments in this thread are highly appreciated.
| =====================================================
|
| This posting is provided "AS IS" with no warranties, and confers no
rights.
|
| --------------------
| | Thread-Topic: SBS2003 Premium and ISA2004 SP3 FTP and POP3 problems
| | thread-index: Acgbh+HohX3WUT0ES4yKH5+elYXKoQ==
| | X-WBNR-Posting-Host: 207.46.19.197
| | From: =?Utf-8?B?cG91bmRzZm9yZA==?=
<poundsford@xxxxxxxxxxxxxxxxxxxxxxxxx>
| | References: <FF1A4C4C-04A3-4E40-9D7E-AC9215BF4CF9@xxxxxxxxxxxxx>
| <doXogPuGIHA.5204@xxxxxxxxxxxxxxxxxxxxxx>
| | Subject: RE: SBS2003 Premium and ISA2004 SP3 FTP and POP3 problems
| | Date: Tue, 30 Oct 2007 23:33:00 -0700
| | Lines: 323
| | Message-ID: <66C9FFFE-CC92-4F41-928F-71C83F8A68DB@xxxxxxxxxxxxx>
| | MIME-Version: 1.0
| | Content-Type: text/plain;
| | charset="Utf-8"
| | Content-Transfer-Encoding: 7bit
| | X-Newsreader: Microsoft CDO for Windows 2000
| | Content-Class: urn:content-classes:message
| | Importance: normal
| | Priority: normal
| | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2992
| | Newsgroups: microsoft.public.windows.server.sbs
| | Path: TK2MSFTNGHUB02.phx.gbl
| | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:72865
| | NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
| | X-Tomcat-NG: microsoft.public.windows.server.sbs
| |
| | Hi Terence,
| |
| | Many thanks for your most very qualified input into this problem.
| | Unfortunately it didn't resolve my problem and I have forwarded you the
| files
| | requested and pray that you will be able to help me out.
| |
| | To me it somehow looks as if something in my wins, dns and winsock has
| been
| | corrupted. Everything execpt from the localhost pop3 and the internal
| network
| | ftp works fine even though the network seems a bit slow which I have
put
| down
| | to ISA? I am only running very few clients on this server and the
traffic
| | should be very limited. Not using VPN or DMZ I have 2 networks on my
ISA
| | 2004, internal which is 192.168.0.1-192.168.0.255, localhost and then
the
| | rest of the world are external networks. For your reference to the
files
| sent
| | the client ip is 192.168.0.14.
| |
| | I am looking forward to your reply.
| |
| | Kind regards
| |
| | Ronnie
| |
| | "Terence Liu [MSFT]" wrote:
| |
| | > Hello Ronnie,
| | >
| | > Thank you for posting here.
| | >
| | > According to your description, I understand that you unable access
| external
| | > FTP and POP3 thru your SBS with ISA 2004. If I have misunderstood the
| | > problem, please don't hesitate to let me know.
| | >
| | > Based on my research, after we install ISA server 2004 on SBS, we
need
| to
| | > run CEICW, the wizard will create necessary rules for Internet access
| | > (include FTP and POP3). So, we do not need to create any customize
rule
| for
| | > FTP or POP3 access. I suggest we try the following steps to see if we
| can
| | > resolve this issue:
| | >
| | > 1. Go through the follow KB and rerun CEICW carefully.
| | >
| | > How to configure Internet access in Windows Small Business Server 2003
| | > http://support.microsoft.com/kb/825763/en-us
| | >
| | > Detailed steps for your reference:
| | >
| | > a. Open Server Management.
| | > b. Click To Do List.
| | > c. Click Connect to the Internet.
| | > d. Proceed to the "Firewall" page and select "Enable Firewall".
| | > e. On the "Services Configuration" page, make sure that "E-mail"
| service
| | > has been checked.
| | > f. On the "Web Services Configuration" page, check the web services
| that
| | > you want to publish.
| | > g. On the "Web Server Certificate" page, choose "Create a new Web
| server
| | > certificate" and key in your public domain name in the box.
| | > h. On the "Internet E-mail" page, choose "Enable Internet e-mail".
| | > i. On the "E-mail Delivery Method" page, choose DNS (Use DNS to route
| | > e-mail) or Smart Host (Forward all e-mail to e-mail server at your
ISP)
| to
| | > route your email, If you select smart host, you need to input the IP
| | > address of your smart host.
| | > j. If you're using POP3 connector, please enable POP3 Connector.
| | > k. Key in your e-mail domain name in "Email Domain Name" page.
| | >
| | > Note: the CEICW will reconfigure the ISA rules and POP3 connector.
| | >
| | > 2. If the issue persists after rerun CEICW, please check the rules in
| ISA:
| | >
| | > a. Please open ISA server 2004 console on SBS
| | > b. Extend to Firewall Policy node
| | > c. Ensure there are "SBS POP3 Outbound Access Rule" and "SBS Internet
| | > Access Rule" here.
| | > d. Move the 2 rules to the top of the list
| | > e. Click Apply button to save changes
| | >
| | > 3. FTP Access Filter
| | >
| | > Please open the ISA management console, navigate to Firewall Policy,
on
| the
| | > right pane, click Toolbox->Protocols->All Protocols->FTP, double
click
| the
| | > FTP protocol and go to the Parameters tab, please ensure that the
"FTP
| | > Access Filter" is listed and ticked under Application Filters option.
| If
| | > it's not selected, please check it and then click Apply to save the
| | > settings.
| | >
| | > 4. Test the FTP in different client mode in IE. Open Internet
Explorer,
| | > click 'Tools'->'Internet Options'. In 'Advanced' tab, modify the
| settings
| | > and then try the FTP access:
| | > a. Check 'Enable folder view for FTP site' option; uncheck 'Use
Passive
| | > FTP' option (The IE will work in Active mode FTP). Does the issue
| reoccur?
| | > b. Uncheck 'Enable folder view for FTP site' option; check 'Use
Passive
| | > FTP' option (The IE will work in Passive mode FTP). Does the issue
| reoccur?
| | >
| | > If we cannot resolve the issue after we perform the above steps,
please
| | > help me collect some information for further investigation:
| | >
| | > 1. Please try to access the FTP site from IE on a XP client, does
this
| | > issue happen again?
| | >
| | > 2. Where is the FTP site on? On SBS server?
| | >
| | > 3. Please help to gather the ISA Info:
| | >
| | > 1) Download the file from the following URL:
| | >
| | > http://www.isatools.org/tools/isainfo.zip
| | >
| | > 2) Extract all files to a folder on ISA server.
| | >
| | > 3) Double click Isainfo.js. This will generate 2 files
| | > ISAInfo2004-<computer-name>.log and ISAInfo2004-<computer-name>.xml
in
| the
| | > current folder.
| | >
| | > 4) Please send these files to me at v-terliu@xxxxxxxxxxxxx
| | >
| | > 4. Please also help to gather the ISA logs:
| | >
| | > 1) Schedule a down time.
| | >
| | > 2) Open ISA 2004 management console.
| | >
| | > 3) Expand the server node and highlight 'Monitoring'.
| | >
| | > 4) In the right pane, switch to the 'Logging' tab, make sure the
'Task
| | > Pane' is showed there.
| | >
| | > 5) In the 'Task Pane', click 'Configure Firewall Logging' under
| 'Logging
| | > Tasks', and then switch the 'log storage format' from 'MSDE database'
| | > (default) to 'File'.
| | >
| | > 6) Switch to the 'Fields' tab, click 'Select All', and then click OK.
| | >
| | > 7) In the 'Task Pane', click 'Configure Web Proxy Logging' under
| 'Logging
| | > Tasks', and then switch the 'log storage format' from 'MSDE database'
| | > (default) to 'File'.
| | >
| | > 8) Switch to the 'Fields' tab, click 'Select All', and then click OK.
| | >
| | > 9) Click 'Apply' to save changes and update the configuration.
| | >
| | > 10) Temporarily disable the Firewall service. To do that, please
click
| | > Monitoring | Services tab, and then right click 'Microsoft Firewall'
to
| | > choose 'Stop'.
| | >
| | > 11) Clear the current existing W3C logs. To do that, go to the log
| saving
| | > directory and clean any existing .W3C logs. By default, the logs will
| be
| | > saved to 'C:\Program Files\Microsoft ISA Server\ISALogs'. (Some MDF
may
| not
| | > be able to deleted, that's normal.) You may backup them first and
| then
| | > delete them.
| | >
| | > 12) Go back to the ISA 2004 management console, and then Start the
| stopped
| | > 'Microsoft Firewall' service.
| | >
| | > 13) Reproduce the problem, stop the service, and then gather the
| resulting
| | > W3C files to me for analysis.
| | >
| | > 14) Please also let me know the IP address of the testing clients so
| that I
| | > can filter the data.
| | >
| | > I hope these steps will give you some help.
| | >
| | > Thanks and have a nice day!
| | >
| | > Best regards,
| | >
| | > Terence Liu(MSFT)
| | >
| | > Microsoft CSS Online Newsgroup Support
| | >
| | > Get Secure! - www.microsoft.com/security
| | >
| | > =====================================================
| | > This newsgroup only focuses on SBS technical issues. If you have
issues
| | > regarding other Microsoft products, you'd better post in the
| corresponding
| | > newsgroups so that they can be resolved in an efficient and timely
| manner.
| | > You can locate the newsgroup here:
| | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| | >
| | > When opening a new thread via the web interface, we recommend you
check
| the
| | > "Notify me of replies" box to receive e-mail notifications when there
| are
| | > any updates in your thread. When responding to posts via your
| newsreader,
| | > please "Reply to Group" so that others may learn and benefit from
your
| | > issue.
| | >
| | > Microsoft engineers can only focus on one issue per thread. Although
we
| | > provide other information for your reference, we recommend you post
| | > different incidents in different threads to keep the thread clean. In
| doing
| | > so, it will ensure your issues are resolved in a timely manner.
| | >
| | > For urgent issues, you may want to contact Microsoft CSS directly.
| Please
| | > check http://support.microsoft.com for regional support phone numbers.
| | >
| | > Any input or comments in this thread are highly appreciated.
| | > =====================================================
| | >
| | > This posting is provided "AS IS" with no warranties, and confers no
| rights.
| | >
| | > --------------------
| | > | Thread-Topic: SBS2003 Premium and ISA2004 SP3 FTP and POP3 problems
| | > | thread-index: AcgaU/3K3o3bNB2BQwqlaNup4rcC2w==
| | > | X-WBNR-Posting-Host: 207.46.19.197
| | > | From: =?Utf-8?B?cG91bmRzZm9yZA==?=
| <poundsford@xxxxxxxxxxxxxxxxxxxxxxxxx>
| | > | Subject: SBS2003 Premium and ISA2004 SP3 FTP and POP3 problems
| | > | Date: Mon, 29 Oct 2007 10:49:02 -0700
| | > | Lines: 102
| | > | Message-ID: <FF1A4C4C-04A3-4E40-9D7E-AC9215BF4CF9@xxxxxxxxxxxxx>
| | > | MIME-Version: 1.0
| | > | Content-Type: text/plain;
| | > | charset="Utf-8"
| | > | Content-Transfer-Encoding: 7bit
| | > | X-Newsreader: Microsoft CDO for Windows 2000
| | > | Content-Class: urn:content-classes:message
| | > | Importance: normal
| | > | Priority: normal
| | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2992
| | > | Newsgroups: microsoft.public.windows.server.sbs
| | > | Path: TK2MSFTNGHUB02.phx.gbl
| | > | Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.sbs:72465
| | > | NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
| | > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| | > |
| | > | Hi,
| | > | I'm completely stuck setting up a a new sbs2003 server with
isa2004.
| The
| | > | whole system is fully updated with all sp's and patches.
| | > | I have not been able to get FTP to function. At the same time I'm
| having
| | > | problems with my pop3 connector not beeing able to poll the emails
| from
| | > our
| | > | isp. (I have to use the pop3 connector until our isp can supply us
| with
| | > | proper dns and mx record).
| | > |
| | > | I have used the CEICW and have configured all this according to the
| | > | instructions in kb825763, and done it several times as well.
| | > |
| | > | My setup is quite simple.
| | > | Broadband with static IP connected to Netgear DG834N router.
| | > | DG834N is set to ALLOW ALL both incoming and outgoing.
| | > | NAT is enabled on Netgear DG834N
| | > | Netgear IP's (Public Static)/LAN (192.168.2.1 - 255.255.255.0)
| | > | SBS2003 Premium with 2 NIC's,
| | > | Internet NIC (192.168.2.2 - 255.255.255.0)
| | > | LAN NIC (192.168.0.20 - 255.255.255.0)
| | > |
| | > | I have tried several different configurations on the ISA2004 but
all
| with
| | > | the same negative results. I have looked at all the FTP posts on
teh
| | > forum
| | > | and tried to follow the instructions to the letter without any
| changes. I
| | > | cannot access and FTP server via IE or Windows explorer. I have
been
| | > trying
| | > | with Frontpage and FileZilla and still no proper connection.
| | > | When using Filezilla I can extract the following during connect
| | > |
| | > | Status: Resolving IP-Address for ftp.photobox.co.uk
| | > | Trace: ControlSocket.cpp(948):
| | > CRealControlSocket::ContinueConnect(012C52C8)
| | > | m_pEngine=01139D60 caller=012C7DE8
| | > | Status: Connecting to 64.69.175.106:21...
| | > | Status: Connection established, waiting for welcome message...
| | > | Trace: CFtpControlSocket::OnReceive()
| | > | Response: 220 Welcome to the Photobox FTP1 server. Please report
| errors
| | > or
| | > | problems to support@xxxxxxxxxxxxxx
| | > | Command: USER rvk@xxxxxxxxxxxxx
| | > | Trace: CFtpControlSocket::OnReceive()
| | > | Response: 331 Username OK, please send password.
| | > | Command: PASS ******
| | > | Trace: CFtpControlSocket::OnReceive()
| | > | Response: 230 User rvk@xxxxxxxxxxxxx logged in. Access restrictions
| apply.
| | > | Command: SYST
| | > | Error: Connection timed out
| | > | Trace: CFtpControlSocket::ResetOperation(2114)
| | > | Trace: CControlSocket::ResetOperation(2114)
| | > | Error: Could not connect to server
| | > | Status: Waiting to retry...
| | > |
| | > |
| | > |
| | > | Trying to do FTP via explorer to ftp.microsoft.com generates the
| | > following
| | > | two log entries.
| | > |
| | > | "The reply from Explorer is: An error occurred opening that folder
on
| the
| | > | FTP Server. Make sure you have permission to access that folder.
| Details:
| | > The
| | > | operation timed out."
| | > |
| | > |
| | > |
| | > | Initiated Connection POUNDSFORD1 29/10/2007 17:33:45
| | > | Log type: Firewall service
| | > | Status: The operation completed successfully.
| | > | Rule: SBS FTP Outbound Access Rule
| | > | Source: Internal (cube-quad-nova-st3.poundsford.local
| 192.168.0.14:1442)
| | > | Destination: External (search.encarta.com 207.46.236.102:21)
| | > | Protocol: FTP
| | > | User: POUNDSFORD\Ronnie
| | > | Additional information
| | > | Number of bytes sent: 0 Number of bytes received: 0
| | > | Processing time: 172ms Original Client IP: 192.168.0.14
| | > | Client agent: Explorer.EXE:3:5.1
| | > |
| | > |
| | > | Closed Connection POUNDSFORD1 29/10/2007 17:34:14
| | > | Log type: Firewall service
| | > | Status: ISA Server ended the connection.
| | > | Rule: SBS FTP Outbound Access Rule
| | > | Source: Internal (cube-quad-nova-st3.poundsford.local
| 192.168.0.14:1440)
| | > | Destination: External (search.encarta.com 207.46.236.102:21)
| | > | Protocol: FTP
| | > | User: POUNDSFORD\Ronnie
| | > | Additional information
| | > | Number of bytes sent: 66 Number of bytes received: 270
| | > | Processing time: 122172ms Original Client IP: 192.168.0.14
| | > | Client agent: Explorer.EXE:3:5.1
| | > |
| | > | Using Frontpage also generates a no response fault.
| | > |
| | > | I have been able to "send" files to a remote webserver using
ftp.exe
| via
| | > cmd
| | > | window. This connection is also very fragile as it freezes as soon
as
| I
| | > issue
| | > | eg a "ls" command.
| | > |
| | > | On the POP3 the server connects and logs on to the pop3 server but
| then
| | > | receives no response.
| | > |
| | > | Any help will be most welcome.
| |
|
|

.