Re: How to open ports on the second server behind SBS?

On the member server, go to Control Panel | Windows Firewall | Exceptions and add the port you want to open. If you want to route requests from the internet to the member server on the port you will open, go to SBS Administrative Tools | Routing and Remote Access, click on 'IP Routing' | 'NAT/Basic Firewall', right click on 'Network Connection' , select 'Properties', click 'Services and Ports', click 'Add' provide the port you open and under 'Private address' the IP of the member server.

Make sure you have the port open at the firewall as well

--
Costas


"Jack" <jack@xxxxxxxxxxxxxx> wrote in message news:1193245646.231935.161050@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
The router -> SBS2K3 Standard (2 NICs) -> Win2K3

Within SBS domain, there is the second server on which we need to open
certain ports.
Is there any way to do that?


Thanks in advance

jack


.

Relevant Pages

  • Re: PC Anywhere
    ... if you have ISA you don't have the basic firewall anymore. ... > What I see under the IP Routing is: ... >>>> one for port 5631 point it to the IP address of the work station you ... I went into Administrative Tools> Routing and Remote Access ...
    (microsoft.public.windows.server.sbs)
  • Re: IIS on SBS 2003 behind COX Cable...
    ... I found a different place to configure it under Server ... Remote Access under IP routing. ... I could not find the firewall settings under ... > to the exceptions tab and add a new port. ...
    (microsoft.public.inetserver.iis)
  • Re: Forwarding port to a member server
    ... Go to Administrative Tools | Routing and Remote Access, select IP Routing | NAT/Basic Firewall, click on the WAN Connection, Services and Ports tab click 'Add', give a description, type 7862 in the incoming and outgoing port textboxes and the IP address of the member server. ... I have forwarded port 7862 traffic from broadband router to the external nic of the sbs server. ... Is there a way to forward the 7862 traffic to a win 2003 member server connected to the internal network of sbs server? ...
    (microsoft.public.windows.server.sbs)
  • Re: External trust and a member server
    ... I was not sure about that whether this issue is caused by firewall. ... please help me to capture a screen shot of the error ... Restricting Active Directory Replication Traffic to a Specific Port ... External trust and a member server ...
    (microsoft.public.win2000.active_directory)
  • Re: Opening port on standard firewall
    ... If you go to Routing and Remote Access, go under IP Routing and then ... NAT/Basic Firewall, then right click on the NIC connected to the internet ... How and where can I open the port 8055 on the ...
    (microsoft.public.windows.server.sbs)