RE: RPC over HTTPS not works after test ISA2006 on SBS2003

Hi Steven,

Thanks for your reply.

I noticed that you disabled the firewall when running the CEICW wizard,
please run the wizard to enable firewall. You can see the detail steps in
my previous reply.

After this, please the following commands again:

"rpcping -t ncacn_http -s ExchangeMBXServer -o RpcProxy=RpcProxyServer -P
"user,domain,*" -I "user,domain,*" -H 1 -u 10 -a connect -F 3 -v 3 -E -R
none" (without the quotation marks)

If the error appears, please send me the error message.

Please also Run Network Monitor on the SBS server to capture the network
traffic between the client and SBS 2003.

1) Go to ftp://ftp.microsoft.com/PSS/Tools/NetMon/ to download the
netmon2.zip in Internet Explorer. Double-click the netmon2.zip file to
extract the files. The password is "trace".

2) Run the qfesetup.EXE and follow the wizard to install the network
monitor on the server.

3) Click Start->Programs->Administrative Tools->Network analysis
Tools->Network Monitor. You are asked to choose an interface. Network
Monitor will capture some packets which pass through this interface. Since
all interfaces are listed as their MAC addresses, it may be difficult for
us to choose a proper interface. You can run the command "ipconfig /all"
under the Command Prompt. This command will list all MAC addresses of all
interfaces. Choose a proper interface. If you need to change an interface,
please choose the "Captures" menu and the "Networks" menu in Network
Monitor.

4) Configure the buffer settings. Choose the "Capture" menu and the "Buffer
Settings" menu. Since we need to capture network packets for a while, I
suggest that you configure large buffer settings, such as 30 MB.

5) Turn on Network Monitor to begin capture.

6) Try to reproduce this problem by configure RPC over http for outlook.

7) Switch to Network Monitor after the file is copied to the server. Choose
Capture->"Stop and View" to stop capturing network packets. Click File ->
Save As to save it to a .cap file.

8)Compress the .cap file by right-clicking on the file and select Send To
-> Compressed (Zipped) Folder.

NOTE: Please let me know the IP address of the client and the server.

Please send the information to v-robeli@xxxxxxxxxxxxx with subject: RPC
over HTTPS not works after test ISA2006 on SBS2003

I am looking forward to hear from you.

If you need further assistance, please don't hesitate to let me know.

Best regards,

Robert Li(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================

This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
<Thread-Topic: RPC over HTTPS not works after test ISA2006 on SBS2003
<thread-index: AcgLGkOqPVyas2AGRIOySntE+1DZBg==
<X-WBNR-Posting-Host: 207.46.193.207
<From: =?Utf-8?B?U3RldmVuIFNwb3JrbWFubg==?=
<StevenSporkmann@xxxxxxxxxxxxxxxxxxxxxxxxx>
<References: <F8EE5A22-5E84-4DE6-9409-FF048AE988A5@xxxxxxxxxxxxx>
<Bzj5c1wCIHA.4516@xxxxxxxxxxxxxxxxxxxxxx>
<Subject: RE: RPC over HTTPS not works after test ISA2006 on SBS2003
<Date: Wed, 10 Oct 2007 01:48:01 -0700
<Lines: 76
<Message-ID: <6A062E93-FE25-4814-A5FF-281A7F805264@xxxxxxxxxxxxx>
<MIME-Version: 1.0
<Content-Type: text/plain;
< charset="Utf-8"
<Content-Transfer-Encoding: 7bit
<X-Newsreader: Microsoft CDO for Windows 2000
<Content-Class: urn:content-classes:message
<Importance: normal
<Priority: normal
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2929
<Newsgroups: microsoft.public.windows.server.sbs
<Path: TK2MSFTNGHUB02.phx.gbl
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:68404
<NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<
<Hi,
<
<> Please let me know the following to make the situation more clearly?
<>
<> 1. After you uninstalled ISA 2006, did you install ISA 2000 or 2004?
<
<no before I installed ISA2006 and after i deinstall it a have done no
other
<ISA installation
<
<> 2. Do all users have such issue?
<
<every i try
<>
<> Based on my research, please take the following steps to see if the
problem
<> can be resolved.
<>
<> Step 1: Before you configure RPC over http, please make sure you have
run
<> the CEICW wizard to allow Outlook via the Internet.
<>
<
<is done.. the only think other is that i disable the firewall
<
<>
<> Step 2: Please ensure you fully take the steps in RWW. You can find the
<> article by the following:
<>
<> 1. Logon RWW.
<> 2. Click the link Using Outlook via the Internet.
<
<this works without any error
<
<>
<> Step 3: Verify RPC Virtual Directory
<>
<> Step 4: Please try with the RPCPing tool.
<> =====
<> If the command is completed, please let me know the exact error message.
<>
<
<first try
<
<RPCPing v2.12. Copyright (C) Microsoft Corporation, 2002
<OS Version is: 5.2, Service Pack 2
<
<RPCPinging proxy server ampr.dd8ba.com with Echo Request Packet
<Sending ping to server
<Response from server received: 200
<Pinging successfully completed in 10390 ms
<
<second try
<
<
<RPCPing v2.12. Copyright (C) Microsoft Corporation, 2002
<OS Version is: 5.2, Service Pack 2
<
<RPCPinging proxy server ampr.dd8ba.com with Echo Request Packet
<Sending ping to server
<Response from server received: 200
<Pinging successfully completed in 453 ms
<
<
<>
<> I am looking forward to hear from you.
<>
<> If you need further assistance, please don't hesitate to let me know.
<>
<>
<> Best regards,
<>
<> Robert Li(MSFT)
<>
<> Microsoft CSS Online Newsgroup Support
<>
<> Get Secure! - www.microsoft.com/security
<>
<
<

.

Relevant Pages

  • Re: List of servers in this workgroup is currently not available.
    ... Computer description appears before the computer name in the My Network ... Microsoft CSS Online Newsgroup Support ... <recently installed a D-Link print server with a reserved IP. ... <As soon as I uninstalled the print server and rebooted the computers, ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA 2006 Basic Configuration
    ... Troubleshooting Client Authentication on Access Rules in ISA Server 2004 ... Microsoft Internet Security & Acceleration Server: ... Microsoft ISA Server Partners: Partner Hardware Solutions ... The routing table for the network adapter Internal ...
    (microsoft.public.isa.configuration)
  • RE: LDAP & Find People not working
    ... > Microsoft CSS Online Newsgroup Support ... > This newsgroup only focuses on SBS technical issues. ... > | Yes, the scanner is on the local area network, so as you indicated below, ... > | So I wonder why the scanner does not see the LDAP server. ...
    (microsoft.public.windows.server.sbs)
  • RE: "Delayed Write Failed" error message when you write a file to
    ... We have a small network and the incident has happened just once. ... message when you write a large file to a server. ... Windows XP Service Pack 2. ... Click Services tab and select Hide All Microsoft Services and Disable ...
    (microsoft.public.windows.server.sbs)
  • RE: "Delayed Write Failed" error message when you write a file to
    ... Check the network. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... message when you write a large file to a server. ...
    (microsoft.public.windows.server.sbs)