Re: Sites not appearing in Browser

Hi I did post a reply to which I had no response! Can please let me know if
you have any further idea's you help would be very much apperciated. This was
my reply to the lat response:

My first response to you said "Thank you for your response. Unfortunately
refreshing the browser several times did not work, tried the work around got
the following message: …… "

The four client machines will display www.google.co.uk site all other site
request will not. The page did not and still does not refresh on any of the
four client machines only the server will display the web page requested. I
hope I am not wasting your time only this is causing major problems to us as
80% of our business is done over the internet, so your help is most welcome
and needed.

Jeff


"SuperGumby [SBS MVP]" wrote:

OK, from what I originally posted.
-------quote-------
try refreshing the browser window a few times. If it eventually gives you
the page it's likely our friend EDNS.
------endquote-----

In other words: If refreshing the browser w fesw time doesn't bring up the
page this is not likely the case.

Before the change, did refreshing the browser a few times result in the page
displaying or are you wasting our time?

"Jeff" <Jeff@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:AAE89FD8-7BBA-4803-907A-8BBBBA070085@xxxxxxxxxxxxxxxx
Thank you yet again for your help.

the instruction was taken this time: C:\Documents and
Settings\Administrator.AFMSERVER>dnscmd afmserver /config /enab
leednsprobes 0
Registry property enableednsprobes successfully reset.
Command completed successfully.

C:\Documents and Settings\Administrator.AFMSERVER>

After a restart of the server my client machines are still unable to get
the
website to appear in the browser but it can be seen with the command
tracert

Any other suggestions?

Jeff
"SuperGumby [SBS MVP]" wrote:

OK, slight space problem in mine also

dnscmd afmserver /config /enableednsprobes 0

Seems neither of us can read a KB :-)

However, I aways use the second form of the command
dnscmd /config /enableednsprobes 0

"Jeff" <Jeff@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D9E590EC-E983-4C76-8E8B-7FC1C42679CC@xxxxxxxxxxxxxxxx
Thank you for trying to help me with this one.

I cut a pasted the command but still came back with the following
following
remark "Unknown Command "/enableednsprobes" Specified -- type
DnsCmd -?."

Do you have any other suggestion to what this might be?

Regards
Jeff

Following is the full information given after command:

C:\Documents and Settings\Administrator.AFMSERVER>dnscmd
afmserver/config
/ena
eednsprobes 0
Unknown Command "/enableednsprobes" Specified -- type DnsCmd -?.

Usage: DnsCmd <ServerName> <Command> [<Command Parameters>]

<ServerName>:
IP address or host name -- remote or local DNS server
. -- DNS server on local machine
<Command>:
/Info -- Get server information
/Config -- Reset server or zone configuration
/EnumZones -- Enumerate zones
/Statistics -- Query/clear server statistics data
/ClearCache -- Clear DNS server cache
/WriteBackFiles -- Write back all zone or root-hint
datafile(s)
/StartScavenging -- Initiates server scavenging
/ResetListenAddresses -- Set server IP address(es) to serve DNS
request
/ResetForwarders -- Set DNS servers to forward recursive
queries t
/ZoneInfo -- View zone information
/ZoneAdd -- Create a new zone on the DNS server
/ZoneDelete -- Delete a zone from DNS server or DS
/ZonePause -- Pause a zone
/ZoneResume -- Resume a zone
/ZoneReload -- Reload zone from its database (file or
DS)
/ZoneWriteBack -- Write back zone to file
/ZoneRefresh -- Force refresh of secondary zone from
master
/ZoneUpdateFromDs -- Update a DS integrated zone by data from
DS
/ZonePrint -- Display all records in the zone
/ZoneResetType -- Change zone type
/ZoneResetSecondaries -- Reset secondary\notify information for a
zone
/ZoneResetScavengeServers -- Reset scavenging servers for a zone
/ZoneResetMasters -- Reset secondary zone's master servers
/ZoneExport -- Export a zone to file
/ZoneChangeDirectoryPartition -- Move a zone to another directory
partition
/EnumRecords -- Enumerate records at a name
/RecordAdd -- Create a record in zone or RootHints
/RecordDelete -- Delete a record from zone, RootHints or
cache
/NodeDelete -- Delete all records at a name
/AgeAllRecords -- Force aging on node(s) in zone
/EnumDirectoryPartitions -- Enumerate directory partitions
/DirectoryPartitionInfo -- Get info on a directory partition
/CreateDirectoryPartition -- Create a directory partition
/DeleteDirectoryPartition -- Delete a directory partition
/EnlistDirectoryPartition -- Add DNS server to partition replication
scope
/UnenlistDirectoryPartition -- Remove DNS server from replication
scope
/CreateBuiltinDirectoryPartitions -- Create built-in partitions

<Command Parameters>:
DnsCmd <CommandName> /? -- For help info on specific Command



"SuperGumby [SBS MVP]" wrote:

slight spacing problem in your command is all.

dnscmd afmserver/config /enableednsprobes 0

or simply

dnscmd /config /enableednsprobes 0


"Jeff" <Jeff@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:58206778-C0CB-4191-A996-A94E661E82DE@xxxxxxxxxxxxxxxx
Thank you for your response. Unfortunately refreshing the browser
several
times did not work, tried the work around got the following message:

C:\Documents and Settings\Administrator.AFMSERVER>dnscmd
afmserver/config/
enableednsprobes 0
Unknown Command "enableednsprobes" Specified -- type DnsCmd -?.

Usage: DnsCmd <ServerName> <Command> [<Command Parameters>]

<ServerName>:
IP address or host name -- remote or local DNS server
. -- DNS server on local machine
<Command>:
/Info -- Get server information
/Config -- Reset server or zone configuration
/EnumZones -- Enumerate zones
/Statistics -- Query/clear server statistics data
/ClearCache -- Clear DNS server cache
/WriteBackFiles -- Write back all zone or root-hint
datafile(s)
/StartScavenging -- Initiates server scavenging
/ResetListenAddresses -- Set server IP address(es) to serve
DNS
requests
/ResetForwarders -- Set DNS servers to forward recursive
queries
to
/ZoneInfo -- View zone information
/ZoneAdd -- Create a new zone on the DNS server
/ZoneDelete -- Delete a zone from DNS server or DS
/ZonePause -- Pause a zone
/ZoneResume -- Resume a zone
/ZoneReload -- Reload zone from its database (file
or
DS)
/ZoneWriteBack -- Write back zone to file
/ZoneRefresh -- Force refresh of secondary zone from
master
/ZoneUpdateFromDs -- Update a DS integrated zone by data
from
DS
/ZonePrint -- Display all records in the zone
/ZoneResetType -- Change zone type
/ZoneResetSecondaries -- Reset secondary\notify information
for a
zone
/ZoneResetScavengeServers -- Reset scavenging servers for a zone
/ZoneResetMasters -- Reset secondary zone's master servers
/ZoneExport -- Export a zone to file
/ZoneChangeDirectoryPartition -- Move a zone to another directory
partition
/EnumRecords -- Enumerate records at a name
/RecordAdd -- Create a record in zone or RootHints
/RecordDelete -- Delete a record from zone, RootHints
or
cache
/NodeDelete -- Delete all records at a name
/AgeAllRecords -- Force aging on node(s) in zone
/EnumDirectoryPartitions -- Enumerate directory partitions
/DirectoryPartitionInfo -- Get info on a directory partition
/CreateDirectoryPartition -- Create a directory partition
/DeleteDirectoryPartition -- Delete a directory partition
/EnlistDirectoryPartition -- Add DNS server to partition
replication
scope
/UnenlistDirectoryPartition -- Remove DNS server from replication
scope
/CreateBuiltinDirectoryPartitions -- Create built-in partitions

<Command Parameters>:
DnsCmd <CommandName> /? -- For help info on specific Command

C:\Documents and Settings\Administrator.AFMSERVER>


"SuperGumby [SBS MVP]" wrote:

try refreshing the browser window a few times. If it eventually
gives
you
the page it's likely our friend EDNS.
Try workaround 2.

http://support.microsoft.com/default.aspx?scid=kb;en-us;828263&Product=winsvr2003
DNS query responses do not travel through a firewall in Windows
Server
2003


"Jeff" <Jeff@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3466974A-C2E7-4746-945D-3F9DA26A7522@xxxxxxxxxxxxxxxx
This is puzzling me, I am not the worlds best network wiz kid so
please
be kind.

Here is my problem, the server can go to any site and it will
appear
in
the browser, if I go to a client machine and type
www.google.co.uk
it
works fine, however if I type www.virginmedia.com or
www.microsoft.com
and most other site names it will not appear in the browser, but
when I
open the command prompt and type tracert www.virginmedia.com
after
10
stages the trace is complete!! Any ideas what is happening?










.

Relevant Pages

  • Re: Sites not appearing in Browser
    ... If refreshing the browser w fesw time doesn't bring up the ... After a restart of the server my client machines are still unable to get ... IP address or host name -- remote or local DNS server ... /DirectoryPartitionInfo -- Get info on a directory partition ...
    (microsoft.public.windows.server.sbs)
  • Re: Sites not appearing in Browser
    ... four client machines only the server will display the web page requested. ... try refreshing the browser window a few times. ... IP address or host name -- remote or local DNS server ... /DirectoryPartitionInfo -- Get info on a directory partition ...
    (microsoft.public.windows.server.sbs)
  • Re: Sites not appearing in Browser
    ... Command completed successfully. ... After a restart of the server my client machines are still unable to get the ... IP address or host name -- remote or local DNS server ... /DirectoryPartitionInfo -- Get info on a directory partition ...
    (microsoft.public.windows.server.sbs)
  • Re: parent dns answers the ARR of child dns
    ... Not only that, but DNS.gduf.edu.cn is performing recursion, while not setting RA in, and not copying RD into, the header of the response. ... % dig www.smartip.gduf.edu.cn. ... If the caching of these records by this server is a problem, surely it's a more *general* problem of the records being cached by resolvers everywhere. ... A DNS server that is authoritative for a zone that has subzones that are delegated to other DNS servers should not be performing recursion. ...
    (comp.protocols.dns.bind)
  • Re: Sites not appearing in Browser
    ... slight spacing problem in your command is all. ... IP address or host name -- remote or local DNS server ... /ResetListenAddresses -- Set server IP addressto serve DNS ... /DirectoryPartitionInfo -- Get info on a directory partition ...
    (microsoft.public.windows.server.sbs)
Loading