Re: IP Settings

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Its a security risk to have UPNP enabled so I do recommend disabling it.

"Joe" <jbarber@xxxxxxxxxxxx> wrote in message
news:uIDbPJ3CIHA.3884@xxxxxxxxxxxxxxxxxxxxxxx
I don't have the same IP's on the two NIC's.

The router is a Firewall Device with a WAN Interface and a LAN Interface
(192.168.1.1) plugged into my SBS External NIC (192.168.1.2)
DHCP is Disabled on the Router. SBS gives out IP's
Port Forwarding for VPN/HTTPS/GRE/RWW/SMTP to SBS External NIC 192.168.1.2
UPNP is enabled too (Could this be the problem???)

Thanks



"me" <me@xxxxxxxxxx> wrote in message news:x79Pi.27$Ge5.5@xxxxxxxxxxxxxxx
Well... you definitely can't have the same IP assigned to both NICs...
that just doesn't make sense.

More info about your router configuration is required. For example, is
it set to bridged mode and passing the public IP addresses through to the
device attached to it? Or is it a firewall with a WAN interface and a
LAN interface? If it is acting as a firewall, is DHCP handing out IP's
to the LAN side?

B


"Joe" <jbarber@xxxxxxxxxxxx> wrote in message
news:%23osdIx2CIHA.5360@xxxxxxxxxxxxxxxxxxxxxxx
Just got a static IP and put the IP address in the router. Now SBS
keeps getting Event ID 7062 errors.
Is the Router's LAN IP supposed to be 192.168.1.1 or 192.168.16.1?
The SBS External NIC plugs into the router.
Here is a copy of ipconfig/all:

Windows IP Configuration

Host Name . . . . . . . . . . . . : RCRSERVER
Primary Dns Suffix . . . . . . . : richards.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : richards.local

PPP adapter RAS Server (Dial In) Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-44-00-00-00
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.65
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled



Ethernet adapter Internal Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II
GigE
VBD Client)
Physical Address. . . . . . . . . : 00-19-B9-B5-19-9D
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2

Ethernet adapter External Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II
GigE
VBD Client) #3
Physical Address. . . . . . . . . : 00-19-B9-B5-19-9F
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Disabled

Thanks for your help.





.

Relevant Pages

  • [Full-disclosure] Telecom Italia Alice Pirelli routers backdoor discoverd to activate telnet/ftp
    ... frominternal lan. ... The interface to configure these modems are made extremily poor by the ... interface and telnet/ftp/tftp services from internal network. ... IP packet to router specific ip 192.168.1.1. ...
    (Full-Disclosure)
  • Re: IP Settings
    ... Connect the LAN side of your router/firewall directly to your backbone ... The router is a Firewall Device with a WAN Interface and a LAN Interface ... Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)
  • ospf cost and route selection (openospfd)
    ... to provide redundancy for routing between LAN 1 and LAN 2. ... The same holds for Router 2, ... WAN X and WAN Y. ... interface gre30 { ...
    (freebsd-net)
  • Problem with LAN->WAN on 1811
    ... I'm having an issue with a 1811 router that was working perfectly fine ... All hosts on the LAN side can see each other and the router's vlan1 ... interface, which is on the same subnet. ... ip flow ingress ...
    (comp.dcom.sys.cisco)
  • Re: IP Settings
    ... The router is a Firewall Device with a WAN Interface and a LAN Interface plugged into my SBS External NIC ... DHCP is Disabled on the Router. ... Or is it a firewall with a WAN interface and a LAN interface? ... Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)