Re: Routing across internal subnets

We are having no problems with the Cisco Tunnel, everything works that way.
I think a DC at the remote locations is probably out of the question.
RWW is not how they want to connect to their outlook, they want to use the
cached exchange mode on the desktop...

Thanks for the thoughts, though...

"Larry Struckmeyer" wrote:

Hi James:

I am struggling here cause I don't do Cisco. However, this much I do know.
SBS does not play nice with three nics.

Some thoughts:

Keep the tunnel, keep the remotes in workgroups, use RWW. Should be a piece
of cake. You would want a Terminal Server on a member server. Should be
less expensive than a DC in each remote office.

Keep the tunnel, add a DC to each location, join the DC and the clients to
the SBS domain and have them authenticate against the DC

VPN's are a pain.

Larry


"James Brubaker" <JamesBrubaker@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:EA43E5D6-D106-46ED-9D99-18EEF2D790E4@xxxxxxxxxxxxxxxx
We have a gre tunnel between this main site and the remote sites on our
Cisco
routers in order to connect the separate subnets for the smaller remote
locations. Individual VPN's from each PC are not really feasible, and the
sites do not have a servers set up to do VPN's just the routers that do
the
tunnel.

Our end goal is the following (for one location):

Remote Site - Cisco Router - Cisco Tunnel Endpoint (Remote) -
192.168.20.0 - 192.168.20.1 - 192.168.100.2 -

Cisco Tunnel Endpoint (Main Office) -Cisco Router - SBS Server (External
Nic) -
192.168.100.1 - 10.10.10.1 - 10.10.10.2 -

SBS Server (Internal Subnet)
192.168.0.0

In essence, that the external 192.168.20.0 subnet can communicate with the
192.168.0.0 Subnet.

Are thoughts are that we may need a 3rd NIC to do a static route (although
current configured static routes do not work), a Vlan in the 192.168.0.0
subnet on the Cisco Router, or possibly ISA.

Thanks again in advance.





"Larry Struckmeyer" wrote:

Hi James:

Other than not being able to ping the internal nic from the router, are
you
having any other problems? Can you explain your desired end goal?

Larry

"James Brubaker" <James Brubaker@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:37DFBF55-63F9-455E-ACCC-AC9510F75728@xxxxxxxxxxxxxxxx
Here is my configuration, any help is greatly apreciated!!
SBS2003, Two NICS, Inside Private NIC is 192.168.0.1, Outside is
10.10.10.2.

Connected to a Cisco Router With Static IP of 10.10.10.1, Which is
connected
directly to the Internet via static IP.

SBS2003 is DHCP server for Internal Network (192.168.0.0) side, no
problems
with
Internet Access, no problems with VPN to SBS.

From the Cisco router (with the 10.10.10.1 address), we are unable to
ping
the 192.168.0.0 side of the SBS2003. We have the router and the server
configured with RIP version 2, and the SBS2003 shows up on the router
in
the
IP Route as connected.

In the SBS2003, A route to the Cisco router shows up when we do a 'show
neighbors' in RRAS.

We have tried to accomplish this by adding static routes on the SBS2003
in
RRAS using
route -p add 192.168.0.0 mask 255.255.255.0 10.10.10.1
route -p add 192.168.0.0 mask 255.255.255.0 10.10.10.2
route -p add 10.10.10.1 mask 255.255.255.0 192.168.0.0
route -p add 10.10.10.2 mask 255.255.255.0 192.168.0.0
but to no avail!!!

Any suggestions or help would be appreciated. We do not have ISA server
installed on the SBS2003 at this point.

Thanks in advance!






.

Relevant Pages

  • Re: Need help creating a VPN through a firewall
    ... I'll rerun CEICW & Remote Access ... couldn't physically reboot the router tonight, ... I'll report tomorrow after rebooting the server and re-running the ... Unable to establish the VPN connection. ...
    (microsoft.public.windows.server.sbs)
  • Re: Accessing PCs that connect to SBS server 2003 via VPN
    ... Router is set up to passthrough, SBS server should be endpoint. ... the router set up for PPTP (VPN) passthrough so that the endpoint is the SBS ... Do List | Configure Remote Access). ...
    (microsoft.public.windows.server.sbs)
  • Re: vpn probl
    ... not to vpn server, so when workstations needed to reply to the ping requests ... they were trying to respond though their gateway that was the adsl router ... static route 172.16.x..x pointing to vpn remote router in rras, ...
    (microsoft.public.windows.server.networking)
  • Re: Need help creating a VPN through a firewall
    ... Using Restart from the router menu should be as good as a physical reboot of ... CEICW and Remote Access wizard? ... try an external VPN again to the SBS server. ... Unable to establish the VPN connection. ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... this is a direct connection to the server. ... From a remote location, or from my laptop plugged into ... the DSL router 4-port switch. ... of the two NICs by clicking the Advanced tabs, it won't open that box, ...
    (microsoft.public.windows.server.sbs)
Loading