Re: Any Good white Papers on remote access

Sorry i have done that
Another thought could the rrs be corrupt somehow?
Can i disable it then re enable will this cause any probelms??
Silly question i ran netst -an i can't see port 4125 open but i have
followed all the instructions

should it say

tcp 192.168.1.1:4125 ??

Jason



"Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:0511E3FF-3045-4351-9C47-3933AC69C20E@xxxxxxxxxxxxxxxx
Is the IP of the external NIC of your server 192.168.1.1 or is that the IP
of your router? (it seems like a router IP). If the external NIC IP is,
for example, 192.168.1.2, then in the router you should open the 4215 and
specify that IP as the destination

--
Costas


"Jason" <Jason@xxxxxxxxxxx> wrote in message
news:uBgo70oBIHA.2324@xxxxxxxxxxxxxxxxxxxxxxx

We have 2 nics on the server

The question do you port foward 4125 to the external NIC server How do
you do that???

All i did was open up the external firewall add port foward tcp 4125 to
the server ip address e.i 192.168.1.1 do i have to do the same then point
it to the second ip address??

Jason




Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:94AD2598-63CF-4DA1-8A76-4EAC02B77CBA@xxxxxxxxxxxxxxxx
How many NICs on the server? If you can connect successfully using the
internal IP, the problem is not with the server, but with some kind of
firewall restrictions. If you have two NICS, do you port forward 4125
to the external NIC of the server?

--
Costas


"Jason" <Jason@xxxxxxxxxxx> wrote in message
news:exh71soBIHA.4200@xxxxxxxxxxxxxxxxxxxxxxx
Hi Costas

Yeap i have try that as well I disable the LAN and connect to outsider
isp that try https:// external ip / remote with no joy Is there are
logfiles i can look @?

is it a problem with our external router??


Jason



"Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:%23JJzIooBIHA.1212@xxxxxxxxxxxxxxxxxxxxxxx
When you run CEICW the port is opens for you on the server. Since you
opened port 4125 on the firewall and you forwarding to the server,
that should be ok as well. The other issue you might have, is that
you try to access RWW, using the external IP, from within your
network.

There are routers that do not allow that, so you'll have to either
remotely connect to an external computer and try to use the external
IP of your server, or be somewhere, outside your network, to try it.

--
Costas


"Jason" <Jason@xxxxxxxxxxx> wrote in message
news:eSRkcloBIHA.3548@xxxxxxxxxxxxxxxxxxxxxxx
Hi Costas

If i type https:// ipaddress / remote i can get to rthe rrw page

if i type https:// external ip / Remote i cet an error i got the
external ip address from www.whoismyip.com

yes i ran ceucw and did select the remote web workspace

yes i did open the port 4125 on your external firewall a question
does it have to be open on sbs2003 server? how do u do that if so??

i don't understand whats happening i have followed all the books on
this to the letter

Cheers

Jason




"Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:8CA1BDFC-1D77-4D49-A5EE-BD5298322273@xxxxxxxxxxxxxxxx
The MX record is not related to remote access but to the mail
server. We can talk about that later. For now, if I understand
correctly, you want to use RWW and you can't. When you type
https://IPAddress/Remote do you get an error and if yes, what is
that error? Did you run CEICW and did you select the Remote Web
Workspace service? Did you open port 4125 on your router and it you
forward it to the internal IP address of the server?

On a separate note, you need an A record at the ISP to point to the
external IPAddress of your server, so you can type
https://name.domain.com/remote instead of using the IP number.


--
Costas


"Jason" <Jason@xxxxxxxxxxx> wrote in message
news:eEmoxvmBIHA.4752@xxxxxxxxxxxxxxxxxxxxxxx
Hi

We trying to set up remote access for our users using https://
ipnumber/remote we can access the page we have enable remote access
from the server wizard we have allows our extend firewall to let
traffic in it just not working do we have to set up a mx record??
to point @ our extend ip address

so we are going to start again with a good white paper

Cheers

Jason













.

Relevant Pages

  • Re: Cost of setting up a network
    ... A router capable of acting as a VPN endpoint for more than one user simultaneously with four Ethernet ports or a switch to suit. ... The rationale for using a server here is basically that the router doesn't need to be able to decide which PC to route the connection to. ... If you are using a router which supports it, you can set up a port-forwarding inbound rule which also _translates_ the port supplied to the receiving port. ... You can use several of these connections to different machines simultaneously. ...
    (uk.comp.homebuilt)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: changed IP address: cant receive email & need to make domain name match IP address
    ... Port Forwarding for 2Wire 1701HG ... SBS CDs, but it's always a good idea to keep them handy. ... As you are set up now, your SBS server is "bare to the Internet" (not ... need to buy at least another inexpensive router to put between the SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW and E-Mail Access Problems
    ... You should not forward port 80 from your router to your external nic-IP. ... You should forward port 444 however to get to the remote web workplace. ... The router is forwarding to the server ...
    (microsoft.public.windows.server.sbs)
Loading