Re: Port 4125 blocked by SBS firewall

Tech-Archive recommends: Fix windows errors by optimizing your registry

Thanks for your help, but I've actually had to stop for today (It's 6:30 pm
in the UK).
If you can post any more suggestions, I will try them out as soon as I can,
but probably not before Monday, unfortunately.

Regards,
Bill

"Costas" wrote:

Bill,

Just type http://<yourservername>/remote That's the NETBIOS name of your
server

--
Costas


"BillNewbie" <BillNewbie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F50DE472-476D-4E5E-895E-A2F4B68A2964@xxxxxxxxxxxxxxxx
I typed: https://subdomain.domain.com/remote from a workstation. It gave
me
'Cannot find server'.
Do you mean I should type: https://domain.local/remote ?
Or should it be https://(windows name)/remote ?

Bill

"Costas" wrote:

First see if RWW works from the inside. On the server or from a domain
workstation type https://servername/remote

Do you get to RWW?

--
Costas


"BillNewbie" <BillNewbie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2AE21783-AE21-435A-80E8-0E8930F4618A@xxxxxxxxxxxxxxxx
I created an A record for the subdomain, pointing to the public IP
Address
of
the router. I'm not sure how to check that it's working OK, but that
doesn't
seem to be the problem, because I get the same result if I enter the IP
Address itself.

Regards,
Bill

"Costas" wrote:

Did you create an A record at the ISP that points to your server (e.g.
server.domain.com)

--
Costas


"BillNewbie" <BillNewbie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F8D779AC-A848-4ED6-B772-AAF9B1AB9274@xxxxxxxxxxxxxxxx
We set up RWW by running Connect to Internet task from ToDo List,
allowing
Outlook Web Access and Remote Web Workplace.
Chose to enable firewall, but not adding any other ports except
default
25
(email).
Created a new Web server certificate – I entered:
subdomain.domain.com
Server sent an email with link to click for RWW - it doesn't work,
gives
'Cannot find server'.
Port 4125 has been enabled on router, its firewall log shows that
packets
are being allowed through, so it must be the SBS Firewall (basic
edition)
which is doing the blocking.

Any suggestions?

Regards,
Bill




.

Relevant Pages

  • Re: Interesting webserver intrusion (apache 1.3.31, mod_ssl 2.8.18, php 4.3.7)
    ... > fairly tight(only allowing 4 ports in), but perhaps I could tighten it ... The host systems firewall rules govern the access to the jailed system. ... What connections does your server need to ... Perhaps there is a 0-day for your ftp server out there. ...
    (Incidents)
  • Re: Add 2nd NIC after intial install?
    ... My biggest question with 1 NIC is: even if workstations are protected with individual firewall products, what is protecting the SBS server itself if ports are open for remote access through the Linksys firewall? ...
    (microsoft.public.windows.server.sbs)
  • Re: Source Code to Filter out WindowsMessenger POP-UPS
    ... Zone Alarm does NOT support 'server'. ... Very few ports are open, ... >What you are asking for amounts to a firewall. ... I would NOT search for source code to compile ...
    (microsoft.public.inetserver.iis.security)
  • Re: Using Office Outlook with exchange server behind windows firewall
    ... On our network I have windows firewall turned on, on both my small business server and my windows xp workstations. ... Based on an article I read about all the ports that exhange may use I also tried making exceptions for ports ...
    (microsoft.public.windows.server.sbs)
  • Re: NETFW.INF, Preconfigured Firewall settings and dialogs
    ... it is Windows Server 2003 SP1 firewall that i'm using. ... Using the document '832017 Port Requirements for the Microsoft Windows ... > to achieve the following goal: some ports are open by default and others ...
    (microsoft.public.windows.server.networking)