Re: Port 4125 blocked by SBS firewall

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I typed: https://subdomain.domain.com/remote from a workstation. It gave me
'Cannot find server'.
Do you mean I should type: https://domain.local/remote ?
Or should it be https://(windows name)/remote ?

Bill

"Costas" wrote:

First see if RWW works from the inside. On the server or from a domain
workstation type https://servername/remote

Do you get to RWW?

--
Costas


"BillNewbie" <BillNewbie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2AE21783-AE21-435A-80E8-0E8930F4618A@xxxxxxxxxxxxxxxx
I created an A record for the subdomain, pointing to the public IP Address
of
the router. I'm not sure how to check that it's working OK, but that
doesn't
seem to be the problem, because I get the same result if I enter the IP
Address itself.

Regards,
Bill

"Costas" wrote:

Did you create an A record at the ISP that points to your server (e.g.
server.domain.com)

--
Costas


"BillNewbie" <BillNewbie@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F8D779AC-A848-4ED6-B772-AAF9B1AB9274@xxxxxxxxxxxxxxxx
We set up RWW by running Connect to Internet task from ToDo List,
allowing
Outlook Web Access and Remote Web Workplace.
Chose to enable firewall, but not adding any other ports except default
25
(email).
Created a new Web server certificate – I entered: subdomain.domain.com
Server sent an email with link to click for RWW - it doesn't work,
gives
'Cannot find server'.
Port 4125 has been enabled on router, its firewall log shows that
packets
are being allowed through, so it must be the SBS Firewall (basic
edition)
which is doing the blocking.

Any suggestions?

Regards,
Bill


.

Relevant Pages

  • Re: Still cant connect to RWW or OWA remotely
    ... As for error messages when I fail to access RWW with the laptop, ... the server) when you fail to access RWW with the laptop? ... I tried accessing RWW from my laptop connected to a router ... match the broadband connection, the two NIC firewall, the remote ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 20003 R2 Newbie
    ... enter OWA from the main menu in RWW as well.) ... About the update client utility -- the linksys router I am using has a ... Try using a smarthost to send outbound mail from your SBS server. ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS VPN setup?
    ... Now, being a bit confused here on the subject, I had installed SBS 2k3 R2 for ... server yet, nor have I started the configuration for my client, (only now ... learn and test the RWW solution before deploying it. ... be building a server with 2 NIC cards- anyways, and a new router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... That poster solved his problem with RWW by enabling ... The server is a SBS2003 SP1 Standard box without ISA, ... the two NICs by clicking the Advanced tabs, it won't open that box, and ... Is the Modem also your Router? ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN Works, OWA and RWW Dont
    ... I'm experiencing an issue configuring rww to allow a few sales guys to ... where can I find some document online on how to configure rww to work. ... Is it manadatory to have an ISA server configured? ... said one was for the router and one for the server. ...
    (microsoft.public.windows.server.sbs)