Re: Remote Access

Hi,

Got the CCTs back earlier than I thought (phew). My firewall is set up as
follows:

SMTP Allow Always 192.168.1.200:25
HTTPS Allow Always 192.168.1.200:443
HTTPS Allow Always 192.168.1.200:4125

Where 192.168.1.200 is the NIC of my SBS server. Using RWW, OWA works but
Companyweb and remote desktop don't.

Thanks

Andrew


"kj [SBS MVP]" wrote:

ALP1970 wrote:
Yep, circuits are down for maintenance, can we pick this back up
tomorrow (1400hrs GMT) when I get them back. I'll be able to check
the firewall again then.

Thanks

There's always somebody in here willing and able to help. I'm a little (-8)
GMT for that hour and who knows what the power company has in store for me.
If she can, I'm sure LW will be at the ready too.


"kj [SBS MVP]" wrote:

ALP1970 wrote:
Hi,

I am a little confused now. I have also lost remote access to the
server so I am unable to make further changes to the firewall until
tomorrow afternoon (GMT).


How were you remotely accessing the server, RDP on 3389 directly?


I have left the firewall setup allowing HTTPS on ports 4125 and 444
through to the Static IP address of the SBS Server NIC.

What is working in RWW:

OWA

What isn't working in RWW:

Connect to server desktops
Companyweb

There is no SSL remote management running on the firewall the only
additional rule is SMTP on port 25 for the exchange server.

Setup like lis the response is ~40ms and is stable.

Any hints for when I get back on site tomorrow (1400hrs GMT).

One step at a time. Set aside 444 and the companyweb. Get RWW going
first.

See the following for guidance on firewall rules.
http://support.microsoft.com/default.aspx/kb/828053

4125 is a TCP port. Not sure if that was just a typo or not.


Thanks All.....

"kj [SBS MVP]" wrote:

ALP1970 wrote:
Sorry,

I'm running a ping out and in to the SBS, when I apply rules to
allow all on 444 and 4125 the ping response time drops from 40ms
to 1000ms. I am using a Netgear DGFV338.


Turn off 444 (usually just for specialty needs) and see if it
changes. That seems like quite a change with no actual traffic
load.

Also make sure there is no external management over ssl enabled
for the Netgear.


"Lanwench [MVP - Exchange]" wrote:

ALP1970 <ALP1970@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Some more info:

If I add rules to point all traffic from 444

For companyweb (but if you're smart you'll allow this only w/in
RWW)

and 4125

For remote desktop

to the statis IP
address of my SBS server then it works fine, but over a period
of 30 minutes performance degrades from a 30ms response to
900ms.

Well, your first post wasn't mentioning a problem, just asking
for help with a solution. Perhaps your Netgear isn't working
right. It's hard to say ....I'm not sure what you're measuring,
exactly.

Thanks

Andrew

"ALP1970" wrote:

Hi,

I have Small Business Server 2003 r2 and want to run all the
remote services (Outlook, sharepoint etc). The server has one
NIC and sits behind a Netgear firewall on DSL. Can someone
tell me what are the rules I will need to run the services
over SSL only.

Thanks

ALP

--
/kj

--
/kj

--
/kj



.

Relevant Pages

  • Re: RWW
    ... "normal" Windows Server 2003 way... ... that this worked before trying RWW in this environment. ... enable Remote Desktop first and to add to the local Remote Desktop Users ... as well as entering credentials on the FBA logon page. ...
    (microsoft.public.windows.server.sbs)
  • RE: Remote Access
    ... internet in services configuration page. ... 825763 How to configure Internet access in Windows Small Business Server ... Also please check the RWW site settings: ... Right click Remote and click Properties. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Connection Issue
    ... the main reason many inidividuals went to 2003 is the RWW (remote web ... > If you want to connect to connect to the SBS server box and the LAN client ... >>through port number 3389 and a workstation on the LAN through port number ...
    (microsoft.public.windows.server.sbs)
  • RE: document spools then disappears in Remote printing in RWW
    ... then access RWW site and then connect to the server box to print? ... The remote machine ... Microsoft CSS Online Newsgroup Support ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS2003 VPN question.
    ... it is quite likely Dana will need to figure out how to forward port 4125 in order to use the ... Then, to set up RWW, you start up CEICW, select your services. ... Then on the Web Server Certificate page, Create a New Web Certificate and enter "server1.danaco.com". ... The remote user will need an SBS User CAL, whether he uses VPN or RWW. ...
    (microsoft.public.windows.server.sbs)