Re: Three network cards in a SBS 2003 server?

The supported setup is 2 NICs. It will recognize as many NICs as you put in.

--
Claus
<baz.greenaway@xxxxxxxxx> wrote in message
news:1190209585.310922.244280@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hoping someone can confirm this.

Is it possible to have three network cards in a SBS 2003 server?

I am in the process of migrating from SBS 2000 to SBS 2003 and have a
new server with two network cards and I am also adding a QLogic
QLA4050C iSCSI HBA adapter (presuming that it will be detected as a
NIC) so that I can boot SBS 2003 from an iSCSI SAN. I have read that
SBS 2003 will only support two network cards(?)

Any advice gratefully received.



.

Relevant Pages

  • Re: Install 3 times (triple crown)
    ... Build the customer SBS box enabling both nics ... network, as are the wan nics of the SBS boxes. ... how far can you go with the installation? ...
    (microsoft.public.windows.server.sbs)
  • Re: Changing from 1 NIC to 2 NICs
    ... The issue with the two nics on the same subnet is that RRAS ... to correct this - and maintain the wireless connections ... router - which would then be on the external network - the workstations are ... Les Connor [SBS Community Member - SBS MVP] ...
    (microsoft.public.windows.server.sbs)
  • Re: Install 3 times (triple crown)
    ... I'm not really talking about DHCP on the router, but as you mentioned it - it can be on or off - but it's best practice practice to have your SBS nics on static IP addresses. ... > Current Network ...
    (microsoft.public.windows.server.sbs)
  • Re: Add 2nd NIC after intial install?
    ... I didn't say anything about Security, I was talking about Saving his ... Even Proxy to Speed up Network For clients. ... >with two NICs. ... >> Thanks to all I've learned here, I'm ready to add a 2nd NIC to my SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: Multiple IP addresses outside of sbs
    ... make it even more difficult for someone to get into your network. ... The dual nics are pretty irrelevant to my current issue. ... between the internet and the sbs server so the the setup works. ...
    (microsoft.public.windows.server.sbs)
Loading