Re: Adding ISA 2004 to existing SBS2003 R2 install

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Yup, that's what I was trying to say.

--
Claus
"Larry Struckmeyer" <lstruckmeyer(at)mis-wizards(dot)com> wrote in message
news:%230QXVQz8HHA.1212@xxxxxxxxxxxxxxxxxxxxxxx
Part 1
One other little thing. If you install ISA on a patched server, apply
ISA SP3 right after the installation without starting ISA or doing
anything else. Then run the CEICW.

Part 2
1. install ISA2004
2. reboot
3. apply SP3
4. run CEICW
and I never had any problem.

If you mean part 2 as a clarification of Part 1, I am good to go.

Thanks.

Larry

"Claus" <cjobes@xxxxxxxxxxxxx> wrote in message
news:O6jC2Ty8HHA.748@xxxxxxxxxxxxxxxxxxxxxxx
Larry,

There are several patches that seem to effect ISA. I was not referring to
W2K3 SP2 as I have not installed it on any of the production servers.
After running into some "no connection issues" on an ISA2004 installation
on a productions server it took me quite a few hours to figure this out.
After that experience I have always followed the following method for
installations after the SBS box had been running for a while:
1. install ISA2004
2. reboot
3. apply SP3
4. run CEICW
and I never had any problem.

--
Claus
"Larry Struckmeyer" <lstruckmeyer(at)mis-wizards(dot)com> wrote in
message news:u8qKQ%23v8HHA.1188@xxxxxxxxxxxxxxxxxxxxxxx
Hey Claus:

That is a great tip..one that I sure missed...

Patched? Any specific ones? SP2 or earlier?

Larry



"Claus" <cjobes@xxxxxxxxxxxxx> wrote in message
news:OGOqmuv8HHA.5424@xxxxxxxxxxxxxxxxxxxxxxx
One other little thing. If you install ISA on a patched server, apply
ISA SP3 right after the installation without starting ISA or doing
anything else. Then run the CEICW.

--
Claus
"Orlando Bob" <OrlandoBob@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:915143EE-9ACD-4299-BF19-D753C30FA96E@xxxxxxxxxxxxxxxx
I did not initially install ISA 2004 when I installed SBS2003 R2.
Instead I
use a hardware firewall and one NIC on the server. Now I would like
to
install ISA 2004. Are there any caveats or gotchas to introducing ISA
2004
into a functioning environment? Is there a step-by-step checklist?










.

Relevant Pages

  • Re: CEICW fails during firewall config, ISA 2004
    ... > upgrading from ISA 2000 to ISA 2004, had to turn off IIS Admin. ... > CEICW wizard failed during the firewall configuration section. ... I reran CEICW, firewall config still failed, and now only half ... I'm just looking for a default, secure installation of ISA 2004 ...
    (microsoft.public.windows.server.sbs)
  • Re: Adding ISA 2004 to existing SBS2003 R2 install
    ... ISA SP3 right after the installation without starting ISA or doing ... Then run the CEICW. ... After running into some "no connection issues" on an ISA2004 installation ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS web access publusing missing
    ... The rules should be created when you run CEICW the first time after installation of ISA 2004. ... Can you access the Internet from either the server or workstations? ...
    (microsoft.public.windows.server.sbs)
  • RE: Remote Access
    ... Yes I did rerun the CEICW but this hasnt helped, I know the firwall settings ... so if I uninstall ISA reboot the server and reinstall ISA I should have ... > Actually, if you upgrade the ISA from 2000 to 2004, the installation will ...
    (microsoft.public.windows.server.sbs)
  • Re: Adding ISA 2004 to existing SBS2003 R2 install
    ... are the consequences if I don't apply ISA SP3 before starting ISA? ... ISA correctly or answer a question wrong while running the CEICW. ... install ISA 2004. ...
    (microsoft.public.windows.server.sbs)