Re: Remote Access Wizard fails to complete with error in rraslog file

Please make sure you have the newest drivers for your NICs and then check
this out....

http://blogs.technet.com/sbs/archive/2007/03/14/can-i-install-windows-server-2003-sp2-on-sbs-2003.aspx

and this....

http://support.microsoft.com/kb/555912

--
Claus
"isap" <isap@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E4927F85-6EEB-4122-A2CF-F8970861E0C8@xxxxxxxxxxxxxxxx
Hi,

I have a client running SBS 2003 which was originall installed with SP1.
This was done sometime lates last year and at that time I configure the
Remote Access Wizard and it was fine. Due to some problems with their
router
they did not use VPN for sometime and eventually it was put put on te back
burner. Now they want to use VPN but when I tried to reconfigure it there
is
a problem.

Windows Server 2003 SP2 is also now on the server which was installed by
Windows Update but I can't be certain that this problem was cause by SP2
since I did not check the Remote Access configuration just before SP2 was
added. Although I have found information indicating that this causes
problems
on SBS 2003. I began to remove the SP2 but then hesitated since it says
that
some software was installed after the patch which may not function
properly.


Here is the output from the rraslog.txt file.

8/23/2007 5:04 PM
C:\Program Files\Microsoft Windows Small Business
Server\Networking\RRASWiz\wizrras.dll, version 5.2.2893.0
Calling CRRASCommit::CommitEx
Calling CRRASCommit::ValidatePropertyBag
pdispPPPBag->QueryInterface returned OK
PropertyBag 2674a0
Reading property value for enabling Remote Access returned OK
bRemoteAccess = 1
Reading property value for VPN returned OK
bVPN = 1
Reading property value for RAS returned OK
bRAS = 0
Calling CRRASCommit::ValidateVPNProperties
Reading VPN Server Name returned OK
VPN Server Name is vpn.quranicacademy.org
Calling CRRASCommit::ValidateDHCPProperties
DHCP server is installed on the box
CRRASCommit::ValidateDHCPProperties returned OK
CRRASCommit::ValidateVPNProperties returned OK
CRRASCommit::ValidatePropertyBag returned OK
pdispPPPBag->QueryInterface returned OK
Pointer to the property bag 2674a0
Calling CRRASCommit::CommitRRAS
Arguments:
PropertyBag 2674a0
bRAS 0
bVPN 1
Getting the GUID of the private NIC returned OK
Private NIC Guid is {E0611804-FE90-4BC3-B067-191DF2FDCE84}
Checking whether RRAS is already running returned OK
RRAS is not running
Installing RRAS returned OK
Dhcp server is installed and running on this box
Enabling DHCP client addressing returned OK
Configuring ports returned OK
Identifying the private NIC for RAS returned OK
Setting the default authentication methods returned OK
Disabling NETBIOS for RAS returned OK
Changing RRAS startup type to automatic returned OK
Configuring Remote Access Policy returned OK
*** Stopping RRAS again returned ERROR 80070426
Starting RRAS service returned OK
Disabling L2TP Ports returned OK
Saving Dhcp Server IP returned OK
Saving RRAS method returned OK
Method is 2
Where 1 = RAS, 2 = VPN 3 = both
CRRASCommit::CommitRRAS returned OK
Committing RRAS returned OK
Calling CRRASCommit::CommitCMAK
Arguments:
PropertyBag 2674a0
bRAS 0
bVPN 1
Template file name is sbsvpn
Reading VPN Server name returned OK
Reading VPN Server name is vpn.quranicacademy.org
Created temp directory CMPB31.tmp
Copying required template files to the temp directory returned OK
Updating CMP template returned OK
Updating CMS template returned OK
Updating SED template returned OK
Creating proxy configuration file returned OK
*** Running IExpress to build the package returned ERROR 80070001
Specifying error location (in CMAK) returned OK
*** CRRASCommit::CommitCMAK returned ERROR 80070001
*** CRRASCommit::CommitEx returned ERROR 80070001




.

Relevant Pages

  • Remote access problem
    ... Calling CRRASCommit::ValidatePropertyBag ... Reading VPN Server Name returned OK ... Checking whether RRAS is already running returned OK ... Dhcp server is installed and running on this box ...
    (microsoft.public.windows.server.sbs)
  • Routing and remote access wizard error. Please help
    ... Calling CRRASCommit::ValidatePropertyBag ... Reading property value for enabling Remote Access returned OK ... Reading VPN Server Name returned OK ... Checking whether RRAS is already running returned OK ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Access Wizard Error
    ... Calling CRRASCommit::ValidatePropertyBag ... Reading VPN Server Name returned OK ... Checking whether RRAS is already running returned OK ... Dhcp server is installed and running on this box ...
    (microsoft.public.windows.server.sbs)
  • Remote Access Wizard Error
    ... Calling CRRASCommit::ValidatePropertyBag ... Reading VPN Server Name returned OK ... Checking whether RRAS is already running returned OK ... Creating proxy configuration file returned OK ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Access Wizard Error
    ... Calling CRRASCommit::ValidatePropertyBag ... Reading VPN Server Name returned OK ... Checking whether RRAS is already running returned OK ... Configuring ISA for VPN returned OK ...
    (microsoft.public.windows.server.sbs)
Loading