Need help with server internet connection

Tech-Archive recommends: Speed Up your PC by fixing your registry


Windows SBS 2003 R2 - 2 NICs - Static IP and router

Cannot get my server to connect to the internet and have exhausted
everything I know (which apparently isn't much.) Client computers are
all connected to the server and working fine; just can't access the
internet from server or clients. I'm thinking I don't really
understand gateways and routers very well and that's where the problem
is. Here's the info on my setup. Any help would be GREATLY
appreciated.

Router: AT&T 2wire gateway - that's about all I know

Server External NIC:
IP address: 192.168.1.10
Subnet: 255.255.255.0
Gateway: 192.168.1.1 (This is the problem I think)
DNS: 192.168.16.2
WINS: Blank

Server LAN connection:
IP address: 192.168.16.2
Subnet: 255.255.255.0
Gateway: Blank
DNS: 192.168.16.2
WINS: 192.168.16.2

OK, here is the (router?) info that I got from my ISP:
IP address: 76.240.9.65
Subnet: 255.255.255.248
Primary DNS: 68.94.156.1
Secondary DNS: 68.94.157.1
Default Gateway: 76.240.9.70

I know that this is a PPPoe connection as far as the router is
concerned but in SBS I'm not sure if it should be configured as a
direct broadband connection or a router with an IP address. I've tried
both ways and it still doesn't work. If you need more information
please let me know. Thanks!


--
robe
------------------------------------------------------------------------
robe's Profile: http://forums.techarena.in/member.php?userid=30038
View this thread: http://forums.techarena.in/showthread.php?t=809513

http://forums.techarena.in

.

Relevant Pages

  • Re: static routing
    ... Connections work going out from inside the router, ... I'll have to remove the router and connect the server directly to the cable ... A static route has been added that matches the subnet ...
    (microsoft.public.windows.server.networking)
  • Re: Connection from remote computer to network SQL Server
    ... There is no firewall on the W2K machine acting as the SQL server. ... I tried making the SQL machine a "trusted" on the router. ... connection works. ... To find the IP address of your computer inside the network, ...
    (microsoft.public.access.adp.sqlserver)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... port on the old router so I now have a segregated WLAN. ... be sure you do not enable any DHCP server in internal network. ... On the Connection Type page, click Broadband, and then click Next. ... On the Network Connection, You must enable and configure the network ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... seleting full time broadband connection. ... Les Connor [SBS Community Member - SBS MVP] ... check the router as well and unless I missed a firewall setting on it, ... Anyway the Server Ipconfig /all is this... ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... As for error messages when I fail to access RWW with the laptop, ... the server) when you fail to access RWW with the laptop? ... I tried accessing RWW from my laptop connected to a router ... match the broadband connection, the two NIC firewall, the remote ...
    (microsoft.public.windows.server.sbs)