Re: installing smtp virtual server under iis for sbs 2003

Hi Laurin,

Thanks for your reply.

Please also try the following:

Step 1: Please try the SharePoint SMTP setting:

1. Open SharePoint Central Administration page in 'Administrative Tools'.
2. Go to Sharepoint Central Administration - Server Configuration -
Configure default
e-mail server settings.
3. Make sure that he local SBS server's address (ServerName.domain.local)
has been configured as 'Outbound SMTP server'.
4. Go to Virtual Server Configuration\Configure Virtual Server Settings -
Companyweb\Virtual Server Management - Virtual server
e-mail settings.
5. Make sure that he local SBS server's address (ServerName.domain.local)
has been configured as 'Outbound SMTP server'.

Step 2: Test the SMTP service on the SBS server. Open a command prompt,
input 'telnet 127.0.0.1 25'. Try to send an e-mail by using the SMTP
command. What's the result? For the detailed SMTP commands, please refer to
the following KB article:

153119 XFOR: Telnet to Port 25 to Test SMTP Communication
http://support.microsoft.com/?id=153119

Step 3: Please make a clean boot to make sure the problem is not caused
third party software:

1. Click Start->Run...->type msconfig and press Enter.
2. Click Services tab and select Hide All Microsoft Services and Disable
All third party Services.
3. Click Startup tab and Disable All startup items.
4. Click OK and choose Restart.
5. After reboot, check whether the problem still occurs.
6. If there are no more problems, please use the above steps to enable
services and startup items one by one in order to figure out the root cause
of this issue.

Help this helps.

Please try the suggestions and let me know the result.

I am looking forward to hear from you.

If you need further assistance, please don't hesitate to let me know.

Best regards,

Robert Li(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================

This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
<Newsgroups: microsoft.public.windows.server.sbs
<From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
<Organization: Microsoft
<Date: Thu, 16 Aug 2007 10:59:18 GMT
<Subject: Re: installing smtp virtual server under iis for sbs 2003
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<MIME-Version: 1.0
<Content-Type: text/plain
<Content-Transfer-Encoding: 7bit
<
<Hi Laurin,
<
<Thanks for your reply.
<
<Based on my research for the error message:
<
<The user or users have been added successfully, but there was an error in
<sending the e-mail message. The server may not be set up correctly to send
<e-mail. To verify that e-mail is configured correctly, contact your server
<administrator.
<
<Please take the following steps:
<
<Step 1: The problem occurs when the Web site was using a bound IP address.
<Please change it to back to "All
<Unassigned".
<
<1. Open IIS console.
<2. Right click on the Default Web site and selected "Properties".
<3. On the Web Site tab, change the IP address to back to "All Unassigned".
<4. Check again.
<
<Step 2: If you have Mcafee virus scan 8.0, the software has an option to
<block any application from relaying on port
<25 (SMTP). Please temporally disable that and try again.
<
<Please try my suggestions and let me know the result.
<
<I am looking forward to hear from you.
<
<If you need further assistance, please don't hesitate to let me know.
<
<Best regards,
<
<Robert Li(MSFT)
<
<Microsoft CSS Online Newsgroup Support
<
<Get Secure! - www.microsoft.com/security
<
<=====================================================
<
<This newsgroup only focuses on SBS technical issues. If you have issues
<regarding other Microsoft products, you'd better post in the corresponding
<newsgroups so that they can be resolved in an efficient and timely manner.
<You can locate the newsgroup here:
<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<
<When opening a new thread via the web interface, we recommend you check
the
<"Notify me of replies" box to receive e-mail notifications when there are
<any updates in your thread. When responding to posts via your newsreader,
<please "Reply to Group" so that others may learn and benefit from your
<issue.
<
<Microsoft engineers can only focus on one issue per thread. Although we
<provide other information for your reference, we recommend you post
<different incidents in different threads to keep the thread clean. In
doing
<so, it will ensure your issues are resolved in a timely manner.
<
<For urgent issues, you may want to contact Microsoft CSS directly. Please
<check http://support.microsoft.com for regional support phone numbers.
<
<Any input or comments in this thread are highly appreciated.
<
<=====================================================
<
<This posting is provided "AS IS" with no warranties, and confers no rights.
<
<--------------------
<<X-Tomcat-ID: 158177569
<<References: <eG8pf6g2HHA.140@xxxxxxxxxxxxxxxxxxxx>
<<ORs84Hh2HHA.4400@xxxxxxxxxxxxxxxxxxxx>
<<O78xOjr2HHA.1204@xxxxxxxxxxxxxxxxxxxx>
<<E2y9Ykz2HHA.4100@xxxxxxxxxxxxxxxxxxxxxx>
<<TYCb6V12HHA.4200@xxxxxxxxxxxxxxxxxxxxxx>
<<MIME-Version: 1.0
<<Content-Type: text/plain
<<Content-Transfer-Encoding: 7bit
<<From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
<<Organization: Microsoft
<<Date: Mon, 13 Aug 2007 12:34:09 GMT
<<Subject: Re: installing smtp virtual server under iis for sbs 2003
<<X-Tomcat-NG: microsoft.public.windows.server.sbs
<<Message-ID: <NbC4AZa3HHA.360@xxxxxxxxxxxxxxxxxxxxxx>
<<Newsgroups: microsoft.public.windows.server.sbs
<<Lines: 260
<<Path: TK2MSFTNGHUB02.phx.gbl
<<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:56102
<<NNTP-Posting-Host: TOMCATIMPORT1 10.201.218.122
<<
<<Hi Laurin,
<<
<<Please help me collect the SMTP log and I will check if there is
something
<<new.
<<
<<1) Open the properties page of the Default SMTP Virtual Server in
Exchange
<<System Manager.
<<2) On the General tab, check the "Enable logging" box.
<<3) Click Properties, click the Extended Properties tab and check all the
<<boxes on the list.
<<4) Click OK twice.
<<5) Stop and restart the SMTP virtual server.
<<6) Add a new user and send out the invitation e-mail.
<<7) Stop the SMTP virtual server.
<<8) Go to the C:\WINDOWS\system32\LogFiles\SMTPSVC1 folder and send me log
<<
<<Also please let me know if the sender is administrator@xxxxxxxxxxxxx
<<
<<I am looking forward to hear from you.
<<
<<If you need further assistance, please don't hesitate to let me know.
<<
<<Best regards,
<<
<<Robert Li(MSFT)
<<
<<Microsoft CSS Online Newsgroup Support
<<
<<Get Secure! - www.microsoft.com/security
<<
<<=====================================================
<<
<<This newsgroup only focuses on SBS technical issues. If you have issues
<<regarding other Microsoft products, you'd better post in the
corresponding
<<newsgroups so that they can be resolved in an efficient and timely
manner.
<<You can locate the newsgroup here:
<<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<<
<<When opening a new thread via the web interface, we recommend you check
<the
<<"Notify me of replies" box to receive e-mail notifications when there are
<<any updates in your thread. When responding to posts via your newsreader,
<<please "Reply to Group" so that others may learn and benefit from your
<<issue.
<<
<<Microsoft engineers can only focus on one issue per thread. Although we
<<provide other information for your reference, we recommend you post
<<different incidents in different threads to keep the thread clean. In
<doing
<<so, it will ensure your issues are resolved in a timely manner.
<<
<<For urgent issues, you may want to contact Microsoft CSS directly. Please
<<check http://support.microsoft.com for regional support phone numbers.
<<
<<Any input or comments in this thread are highly appreciated.
<<
<<=====================================================
<<
<<This posting is provided "AS IS" with no warranties, and confers no
rights.
<<
<<--------------------
<<<X-Tomcat-ID: 182278430
<<<References: <eG8pf6g2HHA.140@xxxxxxxxxxxxxxxxxxxx>
<<<ORs84Hh2HHA.4400@xxxxxxxxxxxxxxxxxxxx>
<<<O78xOjr2HHA.1204@xxxxxxxxxxxxxxxxxxxx>
<<<E2y9Ykz2HHA.4100@xxxxxxxxxxxxxxxxxxxxxx>
<<<MIME-Version: 1.0
<<<Content-Type: text/plain
<<<Content-Transfer-Encoding: 7bit
<<<From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
<<<Organization: Microsoft
<<<Date: Fri, 10 Aug 2007 13:50:54 GMT
<<<Subject: Re: installing smtp virtual server under iis for sbs 2003
<<<X-Tomcat-NG: microsoft.public.windows.server.sbs
<<<Message-ID: <TYCb6V12HHA.4200@xxxxxxxxxxxxxxxxxxxxxx>
<<<Newsgroups: microsoft.public.windows.server.sbs
<<<Lines: 177
<<<Path: TK2MSFTNGHUB02.phx.gbl
<<<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:55740
<<<NNTP-Posting-Host: tomcatimport2.phx.gbl 10.201.218.182
<<<
<<<Hi Laurin,
<<<
<<<I am sorry for misunderstanding your concern.
<<<
<<<I researched your logs and MPS Report.
<<<
<<<Did you send out the invitation letter From: administrator@xxxxxxxx? If
<<<so, the letter was not set out. There are many e-mails send from
<<<administrator@xxxxxxxx to himself, but no one was to bmolhoek@xxxxxxxxx
<<<
<<<From MPS Report, I also cannot find any clue of the error.
<<<
<<<When you take the following steps:
<<<
<<<1. Open Companyweb and click Site Settings.
<<<2. Click Manger Users and then click Add user.
<<<3. Input user name and choose Site Group. Click Next.
<<<4. Make sure the box "Send the following e-mail to let these users know
<<<they have been added" is check.
<<<5. Click Finish.
<<<
<<<Can you see any error messages, for example "The user or users have been
<<<added successfully, but there was error in sending the e-mail message."
<<<
<<<I am looking forward to hear from you.
<<<
<<<Have a nice weekend.
<<<
<<<Best regards,
<<<
<<<Robert Li(MSFT)
<<<
<<<Microsoft CSS Online Newsgroup Support
<<<
<<<Get Secure! - www.microsoft.com/security
<<<
<<<=====================================================
<<<
<<<This newsgroup only focuses on SBS technical issues. If you have issues
<<<regarding other Microsoft products, you'd better post in the
<corresponding
<<<newsgroups so that they can be resolved in an efficient and timely
<manner.
<<<You can locate the newsgroup here:
<<<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<<<
<<<When opening a new thread via the web interface, we recommend you check
<<the
<<<"Notify me of replies" box to receive e-mail notifications when there
are
<<<any updates in your thread. When responding to posts via your
newsreader,
<<<please "Reply to Group" so that others may learn and benefit from your
<<<issue.
<<<
<<<Microsoft engineers can only focus on one issue per thread. Although we
<<<provide other information for your reference, we recommend you post
<<<different incidents in different threads to keep the thread clean. In
<<doing
<<<so, it will ensure your issues are resolved in a timely manner.
<<<
<<<For urgent issues, you may want to contact Microsoft CSS directly.
Please
<<<check http://support.microsoft.com for regional support phone numbers.
<<<
<<<Any input or comments in this thread are highly appreciated.
<<<
<<<=====================================================
<<<
<<<This posting is provided "AS IS" with no warranties, and confers no
<rights.
<<<
<<<--------------------
<<<<X-Tomcat-ID: 129587486
<<<<References: <eG8pf6g2HHA.140@xxxxxxxxxxxxxxxxxxxx>
<<<<ORs84Hh2HHA.4400@xxxxxxxxxxxxxxxxxxxx>
<<<<O78xOjr2HHA.1204@xxxxxxxxxxxxxxxxxxxx>
<<<<MIME-Version: 1.0
<<<<Content-Type: text/plain
<<<<Content-Transfer-Encoding: 7bit
<<<<From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
<<<<Organization: Microsoft
<<<<Date: Fri, 10 Aug 2007 10:27:38 GMT
<<<<Subject: Re: installing smtp virtual server under iis for sbs 2003
<<<<X-Tomcat-NG: microsoft.public.windows.server.sbs
<<<<Message-ID: <E2y9Ykz2HHA.4100@xxxxxxxxxxxxxxxxxxxxxx>
<<<<Newsgroups: microsoft.public.windows.server.sbs
<<<<Lines: 95
<<<<Path: TK2MSFTNGHUB02.phx.gbl
<<<<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:55693
<<<<NNTP-Posting-Host: TOMCATIMPORT1 10.201.218.122
<<<<
<<<<Hi Laurin,
<<<<
<<<<Thanks for your reply.
<<<<
<<<<I am glad to know the problem is resolved.
<<<<
<<<<Please let me know which step in my suggestion helped you resolving the
<<<<problem. This will be very helpful to everyone in newsgroup and MS
<<<<engineers.
<<<<
<<<<If you have any concerns on this issue, please don't hesitate to let me
<<<<know.
<<<<
<<<<Best regards,
<<<<
<<<<Robert Li(MSFT)
<<<<
<<<<Microsoft CSS Online Newsgroup Support
<<<<
<<<<Get Secure! - www.microsoft.com/security
<<<<
<<<<=====================================================
<<<<
<<<<This newsgroup only focuses on SBS technical issues. If you have issues
<<<<regarding other Microsoft products, you'd better post in the
<<corresponding
<<<<newsgroups so that they can be resolved in an efficient and timely
<<manner.
<<<<You can locate the newsgroup here:
<<<<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<<<<
<<<<When opening a new thread via the web interface, we recommend you check
<<<the
<<<<"Notify me of replies" box to receive e-mail notifications when there
<are
<<<<any updates in your thread. When responding to posts via your
<newsreader,
<<<<please "Reply to Group" so that others may learn and benefit from your
<<<<issue.
<<<<
<<<<Microsoft engineers can only focus on one issue per thread. Although we
<<<<provide other information for your reference, we recommend you post
<<<<different incidents in different threads to keep the thread clean. In
<<<doing
<<<<so, it will ensure your issues are resolved in a timely manner.
<<<<
<<<<For urgent issues, you may want to contact Microsoft CSS directly.
<Please
<<<<check http://support.microsoft.com for regional support phone numbers.
<<<<
<<<<Any input or comments in this thread are highly appreciated.
<<<<
<<<<=====================================================
<<<<
<<<<This posting is provided "AS IS" with no warranties, and confers no
<<rights.
<<<<
<<<<--------------------
<<<<<From: "Laurin Beckhusen" <laurin@xxxxxxxx>
<<<<<References: <eG8pf6g2HHA.140@xxxxxxxxxxxxxxxxxxxx>
<<<<<ORs84Hh2HHA.4400@xxxxxxxxxxxxxxxxxxxx>
<<<<<Subject: Re: installing smtp virtual server under iis for sbs 2003
<<<<<Date: Thu, 9 Aug 2007 12:09:32 -0700
<<<<<Lines: 32
<<<<<X-Priority: 3
<<<<<X-MSMail-Priority: Normal
<<<<<X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
<<<<<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3138
<<<<<X-RFC2646: Format=Flowed; Response
<<<<<Message-ID: <O78xOjr2HHA.1204@xxxxxxxxxxxxxxxxxxxx>
<<<<<Newsgroups: microsoft.public.windows.server.sbs
<<<<<NNTP-Posting-Host: adsl-69-232-228-193.dsl.pltn13.pacbell.net
<<<<69.232.228.193
<<<<<Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP03.phx.gbl
<<<<<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:55557
<<<<<X-Tomcat-NG: microsoft.public.windows.server.sbs
<<<<<
<<<<<I would like to be able to email internal for now, but the external
<<<option
<<<<<may be something for the future.
<<<<<
<<<<<The defualt smtp server is correctly set to send email through our
isp,
<<<<and
<<<<<we have no trouble emailing internally or externallly.
<<<<<
<<<<<
<<<<<"SuperGumby [SBS MVP]" <not@xxxxxxxxxxx> wrote in message
<<<<<news:ORs84Hh2HHA.4400@xxxxxxxxxxxxxxxxxxxxxxx
<<<<<> You don't. When Exchange is installed the SMTP component of IIS is
<<<moved
<<<<<> to Exchange management, removed from the IIS console.
<<<<<>
<<<<<> Are you attempting to invite an internal party (on the local
<Exchange)
<<<<or
<<<<<> an external?
<<<<<>
<<<<<> "Laurin Beckhusen" <laurin@xxxxxxxx> wrote in message
<<<<<> news:eG8pf6g2HHA.140@xxxxxxxxxxxxxxxxxxxxxxx
<<<<<>>I have had no luck sending out invite emails from a sharepoint
sight.
<<I
<<<<<>>have double checked my email settings and various other suggestions
<<<from
<<<<<>>users on this newsgroup, but to no avail.
<<<<<>>
<<<<<>> I noticed that I do not hae a defualt virtual server listed under
<<IIS?
<<<<<>> Could this be the problem? How could I go about setting it up?
<<<<<>>
<<<<<>> Cheers
<<<<<>>
<<<<<>> -L
<<<<<>>
<<<<<>
<<<<<>
<<<<<
<<<<<
<<<<<
<<<<
<<<<
<<<
<<<
<<
<<
<

.

Relevant Pages

  • Re: Email enable doc lib
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... navigate to the public folder and send some posts with attachments to the ... I have disabled forms base Athentication from the default V.Smtp server ...
    (microsoft.public.windows.server.sbs)
  • RE: mail relay problems setting up
    ... most SMTP transactions are successful. ... Exchange server. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant logon from workstation as Administrator
    ... server box and let me know if there is any problem related to the issue. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... be able to logon using ANY accounts from that workstation. ...
    (microsoft.public.windows.server.sbs)
  • RE: w3wp.exe unable to start properly and mail delivery very slow
    ... I will be here waiting for your updates, please feel free to post back. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... |> internal NIC as the DNS server on both client computer and SBS server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Nagging Autorization issue for Companyweb after ISA04 install
    ... Check the companyweb CNAME entry in the DNS Server. ... Does the situation occur when you access companyweb from the ISA ... > 'Microsoft Firewall' service. ... > This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
Loading