Re: Dynamic IP and Exchange

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Thanks for the extra info, I will probably try with the DynDNS IP and if I
get any problems look into getting a static IP as well.

"Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:A6924754-8DA5-4959-BB06-25DF12B83745@xxxxxxxxxxxxxxxx
When you register your new domain (e.g. mydomain.com) and you want your MX
record to use the 'mydomain.com' name, you'll need a static IP address.
If you want to keep the dynamic IP address, you'll have to keep on using
the dyndns.com address as your MX record with Exchange. The only problem I
see with that is that there are servers that block emails that come from a
mail server that users a dynamci IP address.

Costas

"Homer Jay" <someoneelse@xxxxxxxxxxxxx> wrote in message
news:uV0H0l12HHA.4476@xxxxxxxxxxxxxxxxxxxxxxx
Thanks both........... I already have an account with DynDNS and can
access RWW, OWA etc, but I plan to register my own domain name to allow
me to then host my own email (and get rid of the POP3 connector I am
currently using).

Thanks again.


"Costas" <cpstechgroup@xxxxxxxxx> wrote in message
news:5F16910C-E9C2-409E-9878-82E6F3DB32D0@xxxxxxxxxxxxxxxx
Yes you can use a dynamic IP for your server by using an appropriate DNS
service (e.g. dyndns.com ). The MVP Merv Porter just posted the
following link half hour ago
http://groups.google.com/group/microsoft.public.windows.server.sbs/msg/be1d68ee2e0ba0d4?hl=en
That will help

Costas


"Homer Jay" <someoneelse@xxxxxxxxxxxxx> wrote in message
news:ueTVAE12HHA.3940@xxxxxxxxxxxxxxxxxxxxxxx
Can I still use Exchange as my SMTP mail server if I only have a
dynamic IP address? I plan to have a registered domain name, but unless
I have to will keep a dynamic IP. Once I register a domain name, even
with a dynamic IP will I then be able to access:

https://myregistereddomainname/remote

And finally, can anyone point me to some good articles for setting up
MS Exchange?

Thanks.









.

Relevant Pages

  • Re: Dynamic IP and Exchange
    ... When you register your new domain and you want your MX record to use the 'mydomain.com' name, you'll need a static IP address. ... The only problem I see with that is that there are servers that block emails that come from a mail server that users a dynamci IP address. ... access RWW, OWA etc, but I plan to register my own domain name to allow me to then host my own email. ... I plan to have a registered domain name, but unless I have to will keep a dynamic IP. ...
    (microsoft.public.windows.server.sbs)
  • Re: is this file legit?
    ... You will need to register. ... Enquire, plan and execute ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: batman-adv: design suggestions
    ... documentation for the routing protocol is on our long ToDo list. ... Do you plan to register it as RFC/IEEE/whatever when linux batman-adv ...
    (Linux-Kernel)
  • Re: New Arizona law...
    ... law I suppose we'd just say both bikes were his. ... If I rode Clough, I'd register. ... I plan on riding the Sullivan County ...
    (rec.motorcycles.dirt)
  • Mini lathe spindle register wear
    ... The register on my minilathe seems to be wearing - chucks which were once interference tight are now a few 1/100ths loose. ... Plan A, get a 55mm x 13mm outside diameter bearing, cut the outer race in half lengthwise as 13mm would be too long, and fit it in a slot cut in the spindle. ...
    (uk.rec.models.engineering)