Re: VBScript: Remote Desktop Disconected



Hi Tomasz,

Thanks for your reply.

Based on my research on MPS Report, please take the following steps:

Step 1: If you have hardware router, please ensure 3389 and 4125 port open.
These two ports are needed when connect to clients disktop. Even when you
connect VPN first, the traffic is still pass through the ports.

Please have the following test:

telnet PublicIP_SBSSever 3389

If the port is open, you will not see any error.

Step 2: Please rerun the CEICW Wizard to configure network correctly:

1. Click Start, click Server Management. Click To Do List and then click
"Connect to the Internet". Click Next, and go through the Internet option.
2. Select Enable firewall and click Next.
3. On the Server Configuration tab, ensure Terminal Service is selected.
4. On the Web Services Configuration page shows, make sure Remote Work
Webplace is selected. Click Next.
5. Go through the steps to finish the wizard.

825763 How to configure Internet access in Windows Small Business Server
2003
http://support.microsoft.com/?id=825763

Step 3: Authogh the problem occurs after you installed the SP2, I still
recommand you to disable RSS as the following article. Based on my
experince, the network problem is caused by RSS.

Please disable of RSS as the steps in the following KB:

http://blogs.technet.com/sbs/archive/2007/03/19/vpn-securenat-nat-and-outloo
k-clients-not-working-after-installing-windows-service-pack-2-in-sbs-2003-pr
emium.aspx

Please try my suggestions and let me know the result.

I am looking forward to hear from you.

If you need further assistance, please don't hesitae to let me know.

Best regards,

Robert Li(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================

This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
<From: "ZielonySBS" <ttrochanowski@xxxxxxxxxxxxxx>
<References: <uAEQS9o0HHA.6072@xxxxxxxxxxxxxxxxxxxx>
<1A35C035-C592-4B43-95E4-57DD95C84E39@xxxxxxxxxxxxx>
<7EFW$iy0HHA.4844@xxxxxxxxxxxxxxxxxxxxxx>
<Subject: Re: VBScript: Remote Desktop Disconected
<Date: Wed, 1 Aug 2007 11:25:30 +0100
<Lines: 49
<X-Priority: 3
<X-MSMail-Priority: Normal
<X-Newsreader: Microsoft Outlook Express 6.00.2900.3138
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3138
<X-RFC2646: Format=Flowed; Original
<Message-ID: <#P0rJZC1HHA.5984@xxxxxxxxxxxxxxxxxxxx>
<Newsgroups: microsoft.public.windows.server.sbs
<NNTP-Posting-Host: host81-149-92-141.in-addr.btopenworld.com 81.149.92.141
<Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP03.phx.gbl
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:53704
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<
<Dear Robert,
<
<Thank you very much for your help. Let me clarify situation.
<
<1. Do all external users or some specific ones have this issue?
<Yes all, it is not my laptop problem.
<
<2. What important change did you make before the issue first occurred?
<I had filed internal network card and few blue screens. Other things seems
<to works all right. I install a new antyvirus software but I swith it off
<now.
<
<3. Do you have ISA server installed?
<No, I havent ISA
<
<4. Do have Windows 2003 SP2 installed?
<Yes, I do.
<
<So far I did:
<
<Step 1: Please make a clean boot to make sure the problem is not caused
< third party software:
<I have only one new software since the problem occour. It is NOD32
<antyvirus. It is off at the moment.
<
<
<Step 2: Please check if you can ping destination computer when the error
< occurs.
<Yes I can ping any device in the network.
<
< Step 3: The problem occurs when IE block pop-ups. To resolved this:
<done. it is not that problem
<
<
< Step 4: If you have Windows Server 2003 SP2 installed, this may cause
< networking issues including NAT and VPN connectivity programs, Outlook not
< connecting, RPC errors, etc.:
<I had SP2 before problem occour.
<
<
<Regards,
<
<Tomasz
<
<
<--------
<
<
<
<

.



Relevant Pages

  • Re: trouble using ftp.exe to connect to external site
    ... you can try to write script to forwarding range of ports in ... We have a special newsgroup about coding. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: Microsoft Windows SBS 2003 Communication Issues
    ... Please add the AutoCAD application to Windows Firewall unblock list to see ... Before you can add a port or ports manually, you have to identify the ports ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: LDAP & Find People not working
    ... > Microsoft CSS Online Newsgroup Support ... > This newsgroup only focuses on SBS technical issues. ... > | Yes, the scanner is on the local area network, so as you indicated below, ... > | So I wonder why the scanner does not see the LDAP server. ...
    (microsoft.public.windows.server.sbs)
  • RE: Cannot Connect via remote desktop
    ... You can establish the RDP connection and it is stops work soon. ... work stably for your network. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • RE: Cannot Connect via remote desktop
    ... You can establish the RDP connection and it is stops work soon. ... work stably for your network. ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)

Quantcast