Re: OWA and RWW not accessible.

Tech-Archive recommends: Fix windows errors by optimizing your registry

SBS Premium with 2 NICs

The other thing I should mention is I also installed another hard drive. I
cant see this being the case, but you never know.
Everything was working fine before I did these installs. ummmmm

"Merv Porter [SBS-MVP]" wrote:

SBS 2003 Standard or Premium?
1 NIC or 2 in the SBS server?

--
Merv Porter [SBS-MVP]
============================

"April" <April@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:148DCD9E-00CB-41AA-8294-7D9F0A9A41FF@xxxxxxxxxxxxxxxx
Yeah I called etrust and its doesnt seem to be there problem either, so
i'm
stumped!
I re-ran the CEICW and enable the firewall settings, re-select the
services..but it didnt fix the problem :(

any other suggestions?

"Merv Porter [SBS-MVP]" wrote:

Hi April,

I don't use ETrust or any other CA product, so I can't speak to any
problems
with it. As for CEICW, re-run it and when it gets to the firewall, check
"enable", re-select any services that you need, then complete the rest of
CEICW.

I'm wondering if E-Trust may have messed with your IIS web sites or
secure
ports?

--
Merv Porter [SBS-MVP]
============================

"April" <April@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F180A8C3-56B2-4363-A7BB-6470282F5264@xxxxxxxxxxxxxxxx
Everything was working fine until I installed this software. I cant
think
of
anything that would have affected IIS..I contact CA to see if they have
and
known issues in regards to this and when I re-ran the CEICW I didn't
checkmark anything, I left all the configurations as is.
What do you think?


"Merv Porter [SBS-MVP]" wrote:

And when you re-ran CEICW, did you checkmark "enable the firewall",
select
the services and complete CEICW?

--
Merv Porter [SBS-MVP]
============================

"April" <April@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F066A611-9CF0-4C88-BAEC-D204CD1969E5@xxxxxxxxxxxxxxxx
Sorry didn't help. any other suggestions?

"Costas" wrote:

Goto IIS Manager, "Default Web Site" / "Properties" and under
"ASP.NET",
make sure that the version listed is 1.1 . Do the same for the
"Remote"
virtual directory and then from the command prompt run: iisreset
/noforce

I don't know if that will help but it's possible that the program
you
installed changed the version of ASP.NET and created the problem
you
have

Costas


"April" <April@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:31B5AA6F-BB20-4A80-B65A-53E0F45F6560@xxxxxxxxxxxxxxxx
I forgot to mention...when I go to the website; I get page cannot
be
displayed.

"April" wrote:

I have SBS2003 (premium edition) and just recently noticed that
our
OWA/RWW
is not accessible...what has changed: over the weekend I install
CA
Integrated Threat Management R8 (to combine our antivirus and
pestpatrol
software) but I couldn't tell you at which point the OWA/RWW
services
stopped
working.

Since I've tried restarting the services: IIS, ISA, Web Proxy,
WWW,
Routing
and Remote but nothing seemed to work, then I re-ran the CEICW
but
still
nothing, any ideas?

Thanks













.

Relevant Pages

  • Re: Dell PE2900 and Broadcom NICs
    ... Broadcom nics. ... I think most SBS installs only take 4 gigs of ram. ... Dell now believes the problem is caused by the Dell Openmanage program in ...
    (microsoft.public.windows.server.sbs)
  • Re: cannot get Netop remote control working on SBS - ports are blocked??
    ... I have several installs with the same ... motherboard and dual Xeons. ... On the NICs I assume that you have the other 3 NICs disabled and not just ... a dual core, dual Xeon SuperMicro motherboard). ...
    (microsoft.public.windows.server.sbs)
  • XP Home, dual nics, DHCP fails, network fails (update)
    ... and re-installed the card and this ... The NICS are connected to separate DHCP ... >software installs, both NICS are failing with either ... >re-install of XP as the only solution!) ...
    (microsoft.public.windowsxp.network_web)
  • XP Home, dual nics, DHCP fails, network fails
    ... The NICS are connected to separate DHCP ... software installs, both NICS are failing with either DHCP ... report when the cable is removed/inserted into the router ...
    (microsoft.public.windowsxp.network_web)