Re: Replaced the NIC on my server and DHCP stopped
- From: "Claus" <cjobes@xxxxxxxxxxxxx>
- Date: Mon, 16 Jul 2007 20:02:04 -0400
You don't have to change the subnet. Even leaving the current IP should
work. The exercise is to use the wizard to select the other NIC card.
--
Claus
<rcfortune@xxxxxxxxxxxx> wrote in message
news:30nn93p392o2movfs0gog8k0oh5cvgnqrb@xxxxxxxxxx
On Mon, 16 Jul 2007 15:48:43 -0400, "Claus" <cjobes@xxxxxxxxxxxxx>
wrote:
you first need to run the "change server IP address" and then run the
CEICW.
Thank you for your reply. I saw previous posts referring to server ip
address and DHCP but was a little spooked to try it without some
confirmation.
My current Server IP is 192.168.16.2 can I change it to 192.168.16.3
or do I have to change subnet ie; 192.168.15.2?
I'll give this a try after people go home, thanks again.
Bob
.
- References:
- Replaced the NIC on my server and DHCP stopped
- From: rcfortune
- Re: Replaced the NIC on my server and DHCP stopped
- From: Claus
- Re: Replaced the NIC on my server and DHCP stopped
- From: rcfortune
- Replaced the NIC on my server and DHCP stopped
- Prev by Date: Re: Replaced the NIC on my server and DHCP stopped
- Next by Date: Re: Cant see out to .co.uk from inside my .local domain (forward look
- Previous by thread: Re: Replaced the NIC on my server and DHCP stopped
- Next by thread: Re: Replaced the NIC on my server and DHCP stopped
- Index(es):
Relevant Pages
|
