Re: CEICW & software updates...

hi, just a side note

why would the 192.168.0.x network be the outside one ?? our network is also
192.168.0.x since i don't remember when.
our network is 192.168.0.x internal and 10.x.x.x external. what are the
default settings ??
192.168.0.0/16 - This block is set aside for use in private networks.
Its intended use is documented in [RFC1918]. Addresses within this
block should not appear on the public Internet.quote from rfc 3330please
note that i am asking out of curiosity.thank you for clearing this
matterPedro Leite from Portugal"Cris Hanna [SBS-MVP]"
<crisnospamhanna@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> escreveu na mensagem
news:A766C6AD-2A30-4433-8927-0771B5292456@xxxxxxxxxxxxxxxx
Just curious as to why you set them up the oposite of the default
Typicall 16.2 would be the internal nic and the 0.1 would be the outside
one

So does this DSL router connect directly to the internet or another
device?

--
Cris Hanna [SBS-MVP]
------------------------------
Please do not contact me directly, only respond in the Newsgroups
MVPs do not work for Microsoft
------------------------------
Send via Windows Mail on Vista Ultimate connected to SBS 2003 R2
"Vibbert" <Vibbert@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0112644F-C194-404F-A092-F4273D8A4945@xxxxxxxxxxxxxxxx
We're using SBS 2003 R2 standard edition. The internal NIC (192.168.0.1)
is
connected to our switch, the external NIC (192.168.16.2) is hooked into
our
DSL Router (192.168.16.1)

"Cris Hanna [SBS-MVP]" wrote:

Lets get ceicw working again, then we can get Windows (microsoft)
update
working again

Tell us about your network
How many nics

What are they connected to?

SBS standard or premium?

--
Cris Hanna [SBS-MVP]
------------------------------
Please do not contact me directly, only respond in the Newsgroups
MVPs do not work for Microsoft
------------------------------
Send via Windows Mail on Vista Ultimate connected to SBS 2003 R2
"Vibbert" <Vibbert@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FB879704-081A-4B8C-BAA4-837053B09970@xxxxxxxxxxxxxxxx
We have a SBS server 2003 R2 that is giving me some problems with
CEICW.
Windows Update services has stopped working and will not restart
because
CEICW gives me an error and will not complete.
(Previosuly, CEICW worked fine; I just changed an e-mail setting and
re-ran
the wizard and it fails on the network settings. No network changes
have
been
made though.) The server is connected to the internet using the 2 NIC
configuration, all users can fully function etc, only Windows Update
services
seems to have an issue.
I can't find anything on the referenced error code in the icwlog.txt
and
hope someone else has seen it before.

-Shannon

Here is the relevant part of the icwlog.txt and below is the ipconfig
if
you're interested:
7/10/2007 9:35 AM
C:\Program Files\Microsoft Windows Small Business
Server\Networking\ICW
\wizemail.dll, version 5.2.2893.0 calling
CEmailCommit::ValidatePropertyBag
().
calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
0x6e50c).
Call to pdispPPPBag->QueryInterface () returned ok.
calling ReadInt4 (0xf0a178, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
Call to ReadInt4 () returned ok.
The out param of ReadInt4() is -1.
calling CValidatePropertyUtil.ValidatePropertyInteger ().
Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
Call to CEMailCommit::ValidatePropertyBag () returned ok.
calling CNetCommit::Commit (15769976).
calling CNetCommit::ValidatePropertyBag ().
Call to Querying for the property bag () returned ok.
Property bag is not dirty, skipping validation calling
CNetCommit::Common
().
calling CNetCommit::GetLanNicInfo ().
LAN NIC Guid: {78FDA0D9-FA40-4921-8756-C7BA7A8CF3F5}
Call to Converting LAN NIC Guid () returned ok.
Call to Getting IP address for the LAN NIC () returned ok.
Call to Reading in the LAN NIC info () returned ok.
Call to Fixing the TCP/IP NIC Binding order () returned ok.
Dhcp server is installed and not disabled Call to Set DHCP Server to
start
up automatically () returned ok.
DNS server is installed and not disabled Call to Changing startup
type
for
DNS () returned ok.
Call to Clearing DNS server entries on the LAN NIC () returned ok.
Call to Setting DNS server IP for the LAN NIC () returned ok.
Call to Resetting DNS recursion timeout () returned ok.
Call to Resetting client dns query timouts in config.dat () returned
ok.
Call to DsGetDcName for local domain name () returned ok.
Call to Installing RRAS (LAN) () returned ok.
Call to Installing NAT () returned ok.
Call to Clearing all static routes () returned ok.
calling CNetCommit::DoRouter ().
Call to Configuring RRAS NAT () returned ok.
Call to Converting external NIC guid () returned ok.
Call to Clearing the default gateway on the LAN NIC () returned ok.
Call to Clearing the default gateway on the external NIC () returned
ok.
Call to Setting default gateway on the external NIC () returned ok.
Call to Setting DNS forwarders () returned ok.
Call to Clearing DNS servers on the external NIC () returned ok.
Call to Making sure external NIC points to the local DNS server ()
returned
ok.
Call to GetLocalDomainName () returned ok.
Call to Deleting the DNS record for the external NIC () returned ok.
Call to Preparing DNS for DNS listener reset () returned ok.
Call to Resetting DNS listeners () returned ok.
Call to Disabling dns registration on the external NIC () returned
ok.
Call to Disabling services on the external NIC () returned ok.
Call to Disabling NetBIOS for the external NIC () returned ok.
URL to the router is http://192.168.16.1 Error 0x80070006 returned
from
call
to Adding routers IP address to the intranet zone().
Error 0x80070006 returned from call to CNetCommit::DoRouter().
Error 0x80070006 returned from call to Configuring for router
connection().
Error 0x80070006 returned from call to CNetCommit::Common().
Error 0x80070006 returned from call to CNetCommit::Commit().
calling GetBOConnector ().
Call to GetBOConnector () returned ok.
calling spADs->PutEx (ADS_PROPERTY_CLEAR,
msExchSmtpOutboundSecurityPassword).
Call to spADs->PutEx () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.

IPconfig
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.

Windows IP Configuration

Host Name . . . . . . . . . . . . : host
Primary Dns Suffix . . . . . . . : host.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : host.local

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network
Connection w
ith I/O Acceleration #2
Physical Address. . . . . . . . . : 00-18-F3-FF-60-72
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.1
Primary WINS Server . . . . . . . : 192.168.0.1

Ethernet adapter Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network
Connection w
ith I/O Acceleration
Physical Address. . . . . . . . . : 00-18-F3-FF-60-73
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.16.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Disabled






.

Relevant Pages

  • Re: CEICW & software updates...
    ... UPNP router, lists my DNS addresses, lists the ... NICS and their addresses and then moves on to the firewall configuration. ... When it was originally configured though, I did choose broadband connection. ... calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW failure
    ... Right now, your PPPoE connection is acting as a NIC, another network ... >> Moose has two pysical nics in his server, ... it fails during the Network Configuration ... >> Call to Changing startup type for DNS returned ok. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Access Sluggish
    ... In network properties this nic is called "Server Local Area Connection" and ... Remote acces is sluggish using RDP and RWW ... whether both NICs were enabled during SBS setup and therefore the SBS ...
    (microsoft.public.windows.server.sbs)
  • Internet Woes: Can ping, Cannot Browse
    ... I just installed a new SBS2003 network for a client. ... neither the workstations nor the server can browse most Internet sites. ... Ethernet adapter Network Connection: ... Connection-specific DNS Suffix. ...
    (microsoft.public.windows.server.sbs)
  • Re: Incorrect NIC Status reporting
    ... seems to me the Auto of Speed & Duplex doesn't work on some NICs. ... How to Setup Windows, Network, VPN & Remote Access on ... an Asus P4C800-E Deluxe which has an on-board LAN ... and "A network connection is unplugged". ...
    (microsoft.public.windowsxp.network_web)
Loading