Re: Setup could not configure the default settings for Remote Assistance
- From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
- Date: Mon, 28 May 2007 11:31:04 GMT
Hi Andrew,
Thanks for updating.
I am sorry for the delay due to the weekend.
I am sorry to know the problem persists.
Here are the answers to your question:
1. If you activate the server now, after you format and reinstall the
system, you can reactive it again.
2. Based on my experience, most of time, if you ignore the error and the
installation can be finished successfully, this will work right.
If you need further assistance, please don't hesitate to let me know.
Best regards,
Robert Li(MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
<Reply-To: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<From: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<References: <ezPFJoBjHHA.4132@xxxxxxxxxxxxxxxxxxxx>
<Hmu9l$HjHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<e04piyqjHHA.392@xxxxxxxxxxxxxxxxxxxx>
<KHd5sYWkHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<OJfK8vTnHHA.4772@xxxxxxxxxxxxxxxxxxxx>
<0QU#PrfnHHA.1140@xxxxxxxxxxxxxxxxxxxxxx>
<OGr8vZjnHHA.1776@xxxxxxxxxxxxxxxxxxxx>
<J944$EsnHHA.1140@xxxxxxxxxxxxxxxxxxxxxx>
<Subject: Re: Setup could not configure the default settings for Remote
Assistance
<Date: Fri, 25 May 2007 15:33:41 -0400
<Lines: 654
<Organization: 2000 Computer Solutions, Inc.
<X-Priority: 3
<X-MSMail-Priority: Normal
<X-Newsreader: Microsoft Outlook Express 6.00.2800.1807
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
<Message-ID: <#np0bOwnHHA.4896@xxxxxxxxxxxxxxxxxxxx>
<Newsgroups: microsoft.public.windows.server.sbs
<NNTP-Posting-Host: mail.2csiliny.com 216.254.70.209
<Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP02.phx.gbl
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:39427
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<
<Hi, Robert--
<
< There was no Administration key under HKLM/Software/Microsoft/Small
<Business Server. I changed SBSRoot/Admin to 0 and reran the installation
but
<it produced the same result.
<
< Two questions. First, I've not yet activated this installation and
<have 6 days left. If I activate it now and later decide to reformat will I
<have a problem reactivating? Second, what happens if I simply ignore the
<error and proceed anyway? What would be affected or not work right? Other
<than that, I'm happy to continue troubleshooting. Fortunately, it is for
our
<own use and not for a client, so we aren't looking bad in front of someone
<else.
<
< -- Andrew
<
<"Robert Li [MSFT]" <v-robeli@xxxxxxxxxxxxxxxxxxxx> wrote in message
<news:J944$EsnHHA.1140@xxxxxxxxxxxxxxxxxxxxxxxxx
<> Hi Andrew,
<>
<> Thanks for updating.
<>
<> I am sorry to know the problem persists. I made deep research on this,
<> please try the following:
<>
<> Go to registry and delet "Administration" key after backing it from
under
<> HKLM/Software/Microsoft/SmallBusinessServer. Also chang SBSRoot/Admin to
<> "0".
<>
<> Retry the install to see if the problem is resoved
<>
<> I am looking forward to hear from you.
<>
<> If you need further assistance, please don't hesitate to let me know.
<>
<> Best regards,
<>
<> Robert Li(MSFT)
<>
<> Microsoft CSS Online Newsgroup Support
<>
<> Get Secure! - www.microsoft.com/security
<>
<> =====================================================
<>
<> This newsgroup only focuses on SBS technical issues. If you have issues
<> regarding other Microsoft products, you'd better post in the
corresponding
<> newsgroups so that they can be resolved in an efficient and timely
manner.
<> You can locate the newsgroup here:
<> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<>
<> When opening a new thread via the web interface, we recommend you check
<the
<> "Notify me of replies" box to receive e-mail notifications when there are
<> any updates in your thread. When responding to posts via your newsreader,
<> please "Reply to Group" so that others may learn and benefit from your
<> issue.
<>
<> Microsoft engineers can only focus on one issue per thread. Although we
<> provide other information for your reference, we recommend you post
<> different incidents in different threads to keep the thread clean. In
<doing
<> so, it will ensure your issues are resolved in a timely manner.
<>
<> For urgent issues, you may want to contact Microsoft CSS directly. Please
<> check http://support.microsoft.com for regional support phone numbers.
<>
<> Any input or comments in this thread are highly appreciated.
<>
<> =====================================================
<>
<> This posting is provided "AS IS" with no warranties, and confers no
<rights.
<>
<> --------------------
<> <Reply-To: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <From: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <References: <ezPFJoBjHHA.4132@xxxxxxxxxxxxxxxxxxxx>
<> <Hmu9l$HjHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<> <e04piyqjHHA.392@xxxxxxxxxxxxxxxxxxxx>
<> <KHd5sYWkHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<> <OJfK8vTnHHA.4772@xxxxxxxxxxxxxxxxxxxx>
<> <0QU#PrfnHHA.1140@xxxxxxxxxxxxxxxxxxxxxx>
<> <Subject: Re: Setup could not configure the default settings for Remote
<> Assistance
<> <Date: Thu, 24 May 2007 15:05:00 -0400
<> <Lines: 487
<> <Organization: 2000 Computer Solutions, Inc.
<> <X-Priority: 3
<> <X-MSMail-Priority: Normal
<> <X-Newsreader: Microsoft Outlook Express 6.00.2800.1807
<> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
<> <Message-ID: <OGr8vZjnHHA.1776@xxxxxxxxxxxxxxxxxxxx>
<> <Newsgroups: microsoft.public.windows.server.sbs
<> <NNTP-Posting-Host: mail.2csiliny.com 216.254.70.209
<> <Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
<> <Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:39217
<> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <
<> < No good. I ran dcgpofix /ignoreschema /target:both (which
<completed
<> <okay) and then reran the setup and told it to reinstall the
<Administration
<> <component. Still the same error. Can we try anything else?
<> <
<> <"Robert Li [MSFT]" <v-robeli@xxxxxxxxxxxxxxxxxxxx> wrote in message
<> <news:0QU%23PrfnHHA.1140@xxxxxxxxxxxxxxxxxxxxxxxxx
<> <> Hi Andrew,
<> <>
<> <> Thanks for updating.
<> <>
<> <> I researched your MPS Report and found many 1030 and 1058. That seems
a
<> <> couple of them missing in the policies. If group policy fails, the
<> <> component cannot be successfully installed. Please take the following
<> <> steps:
<> <>
<> <> Step 1: Use DCGPOFIX.EXE will restore the Default Domain Policy and
the
<> <> Default Domain Controller Policy to original default settings. It does
<> not
<> <> affect other GPOs on SBS server.
<> <>
<> <> Please run DcGPOFix /Target:BOTH command on the server to reset the
<> <> policies and then try again
<> <>
<> <> For more information, please refer to:
<> <>
<> <> Restore Default Group Policy Objects
<> <>
<>
<<http://www.microsoft.com/resources/documentation/windowsserv/2003/enterpri
s
<> e
<> <> /proddocs/en-us/dcgpofix.asp
<> <>
<> <> Hope the information helps.
<> <>
<> <> I am looking forward to hear from you.
<> <>
<> <> If you need further assistance, please don't hesitate to let me know.
<> <>
<> <> Best regards,
<> <>
<> <> Robert Li(MSFT)
<> <>
<> <> Microsoft CSS Online Newsgroup Support
<> <>
<> <> Get Secure! - www.microsoft.com/security
<> <>
<> <> =====================================================
<> <>
<> <> This newsgroup only focuses on SBS technical issues. If you have
issues
<> <> regarding other Microsoft products, you'd better post in the
<> corresponding
<> <> newsgroups so that they can be resolved in an efficient and timely
<> manner.
<> <> You can locate the newsgroup here:
<> <> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<> <>
<> <> When opening a new thread via the web interface, we recommend you
check
<> <the
<> <> "Notify me of replies" box to receive e-mail notifications when there
<are
<> <> any updates in your thread. When responding to posts via your
<newsreader,
<> <> please "Reply to Group" so that others may learn and benefit from your
<> <> issue.
<> <>
<> <> Microsoft engineers can only focus on one issue per thread. Although
we
<> <> provide other information for your reference, we recommend you post
<> <> different incidents in different threads to keep the thread clean. In
<> <doing
<> <> so, it will ensure your issues are resolved in a timely manner.
<> <>
<> <> For urgent issues, you may want to contact Microsoft CSS directly.
<Please
<> <> check http://support.microsoft.com for regional support phone numbers.
<> <>
<> <> Any input or comments in this thread are highly appreciated.
<> <>
<> <> =====================================================
<> <>
<> <> This posting is provided "AS IS" with no warranties, and confers no
<> <rights.
<> <>
<> <> --------------------
<> <> <Reply-To: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <> <From: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <> <References: <ezPFJoBjHHA.4132@xxxxxxxxxxxxxxxxxxxx>
<> <> <Hmu9l$HjHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<> <> <e04piyqjHHA.392@xxxxxxxxxxxxxxxxxxxx>
<> <> <KHd5sYWkHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<> <> <Subject: Re: Setup could not configure the default settings for
Remote
<> <> Assistance
<> <> <Date: Wed, 23 May 2007 09:12:07 -0400
<> <> <Lines: 339
<> <> <Organization: 2000 Computer Solutions, Inc.
<> <> <X-Priority: 3
<> <> <X-MSMail-Priority: Normal
<> <> <X-Newsreader: Microsoft Outlook Express 6.00.2800.1807
<> <> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
<> <> <Message-ID: <OJfK8vTnHHA.4772@xxxxxxxxxxxxxxxxxxxx>
<> <> <Newsgroups: microsoft.public.windows.server.sbs
<> <> <NNTP-Posting-Host: mail.2csiliny.com 216.254.70.209
<> <> <Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
<> <> <Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.server.sbs:38874
<> <> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <> <
<> <> < Sorry for the delay; I just took two weeks off and wasn't in
a
<> <> <position to take care of this. I've uploaded the file and am curious
<to
<> <> know
<> <> <what the problem might be.
<> <> <
<> <> <"Robert Li [MSFT]" <v-robeli@xxxxxxxxxxxxxxxxxxxx> wrote in message
<> <> <news:KHd5sYWkHHA.3352@xxxxxxxxxxxxxxxxxxxxxxxxx
<> <> <> Hi Andrew,
<> <> <>
<> <> <> Thanks for updating.
<> <> <>
<> <> <> Please upload the file by clicking the following link:
<> <> <>
<> <>
<>
<<<https://sftasia.one.microsoft.com/ChooseTransfer.aspx?key=6b17afc7-3673-4
b
<> 0
<> <> 2
<> <> <> -a0f5-45608a533cf9
<> <> <>
<> <> <> Password: pqUgX-1#]N9wt9LX
<> <> <>
<> <> <> I am looking forward to hear from you.
<> <> <>
<> <> <> If you need further assistance, please don't hesitate to let me
<know.
<> <> <>
<> <> <> Best regards,
<> <> <>
<> <> <> Robert Li(MSFT)
<> <> <>
<> <> <> Microsoft CSS Online Newsgroup Support
<> <> <>
<> <> <> Get Secure! - www.microsoft.com/security
<> <> <>
<> <> <> =====================================================
<> <> <>
<> <> <> This newsgroup only focuses on SBS technical issues. If you have
<> issues
<> <> <> regarding other Microsoft products, you'd better post in the
<> <> corresponding
<> <> <> newsgroups so that they can be resolved in an efficient and timely
<> <> manner.
<> <> <> You can locate the newsgroup here:
<> <> <> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<> <> <>
<> <> <> When opening a new thread via the web interface, we recommend you
<> check
<> <> <the
<> <> <> "Notify me of replies" box to receive e-mail notifications when
<there
<> <are
<> <> <> any updates in your thread. When responding to posts via your
<> <newsreader,
<> <> <> please "Reply to Group" so that others may learn and benefit from
<your
<> <> <> issue.
<> <> <>
<> <> <> Microsoft engineers can only focus on one issue per thread.
Although
<> we
<> <> <> provide other information for your reference, we recommend you post
<> <> <> different incidents in different threads to keep the thread clean.
<In
<> <> <doing
<> <> <> so, it will ensure your issues are resolved in a timely manner.
<> <> <>
<> <> <> For urgent issues, you may want to contact Microsoft CSS directly.
<> <Please
<> <> <> check http://support.microsoft.com for regional support phone
<numbers.
<> <> <>
<> <> <> Any input or comments in this thread are highly appreciated.
<> <> <>
<> <> <> =====================================================
<> <> <>
<> <> <> This posting is provided "AS IS" with no warranties, and confers no
<> <> <rights.
<> <> <>
<> <> <> --------------------
<> <> <> <Reply-To: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <> <> <From: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <> <> <References: <ezPFJoBjHHA.4132@xxxxxxxxxxxxxxxxxxxx>
<> <> <> <Hmu9l$HjHHA.3352@xxxxxxxxxxxxxxxxxxxxxx>
<> <> <> <Subject: Re: Setup could not configure the default settings for
<> Remote
<> <> <> Assistance
<> <> <> <Date: Fri, 4 May 2007 20:30:46 -0400
<> <> <> <Lines: 228
<> <> <> <Organization: 2000 Computer Solutions, Inc.
<> <> <> <X-Priority: 3
<> <> <> <X-MSMail-Priority: Normal
<> <> <> <X-Newsreader: Microsoft Outlook Express 6.00.2800.1807
<> <> <> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
<> <> <> <Message-ID: <e04piyqjHHA.392@xxxxxxxxxxxxxxxxxxxx>
<> <> <> <Newsgroups: microsoft.public.windows.server.sbs
<> <> <> <NNTP-Posting-Host: mail.2csiliny.com 216.254.70.209
<> <> <> <Path:
<> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP06.phx.gbl
<> <> <> <Xref: TK2MSFTNGHUB02.phx.gbl
<> microsoft.public.windows.server.sbs:34845
<> <> <> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <> <> <
<> <> <> < I attempted to send the requested information via e-mail
<but
<> <it
<> <> <was
<> <> <> <blocked by your spam filter. Please provide an alternate means of
<> <> sending
<> <> <> it
<> <> <> <or have the spam filter adjusted to allow the message through.
<> <> <> <
<> <> <> <You do not have permission to send to this recipient. For
<assistance,
<> <> <> <contact your system administrator.
<> <> <> <
<> <> <> <<mail.2csiliny.com #5.7.1 smtp;550 5.7.1 <Your e-mail was rejected
<by
<> <an
<> <> <> <anti-spam content filter on gateway (205.248.106.30). Reasons for
<> <> <rejection
<> <> <> <may be: obscene language, graphics, or spam-like characteristics.
<> <> <Removing
<> <> <> <these may let the e-mail through the filter.>>
<> <> <> <
<> <> <> <
<> <> <> <
<> <> <> <"Robert Li [MSFT]" <v-robeli@xxxxxxxxxxxxxxxxxxxx> wrote in
message
<> <> <> <news:Hmu9l$HjHHA.3352@xxxxxxxxxxxxxxxxxxxxxxxxx
<> <> <> <> Hi Andrew,
<> <> <> <>
<> <> <> <> Thanks for posting in our newsgroup.
<> <> <> <>
<> <> <> <> From your description, I know that cannot reinstall the
<> <Administration
<> <> <> <> component. If I am off-base, please don't hesitate to let me
<know.
<> <> <> <>
<> <> <> <> I searched through our internal knowledge base extensively but
<> there
<> <> <was
<> <> <> <no
<> <> <> <> previous record of the error codes you mentioned. The problem
may
<> be
<> <> <more
<> <> <> <> complex and time-consuming. Thanks for your understanding.
<> <> <> <>
<> <> <> <> Please take the following steps to see if the problem can be
<> <resolved:
<> <> <> <>
<> <> <> <> Step 1: Check the status of Remote Desktop Help Session
<Manager.By
<> <> <> default
<> <> <> <> it is set to Manual and not started.
<> <> <> <>
<> <> <> <> 1. Run services.msc command.
<> <> <> <> 2. Double click Remote Desktop Help Session Manager, set Start
<type
<> <to
<> <> <> <> Manual. Also make sure that's stopped.
<> <> <> <>
<> <> <> <> Step 2: Please try to reregister the following DLLs
<> <> <> <>
<> <> <> <> Cd C:\Program Files\Windows for Small Business
<> <Server\Administration\
<> <> <> <> regsvr32 wizchain.dll
<> <> <> <>
<> <> <> <> Cd C:\Program Files\Microsoft Integration\Windows Small Business
<> <> Server
<> <> <> <2003
<> <> <> <> regsvr32 wizchain.dll
<> <> <> <>
<> <> <> <> Step 3: Please make sure sbs2003 should be a Global Catalog
<Server
<> &
<> <> <> <should
<> <> <> <> have all the 5 FSMO roles.
<> <> <> <>
<> <> <> <> Step 4: Please try to uninstall Administration component and
then
<> <> <> <reinstall
<> <> <> <> again.
<> <> <> <>
<> <> <> <> If the problem persists, please help me collect the following:
<> <> <> <>
<> <> <> <> MPS Report
<> <> <> <>
<> <> <> <> 1) Download MPS report tool from:
<> <> <> <>
<> <> <>
<> <>
<>
<<<<http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b
0
<> b
<> <> d
<> <> <> 9
<> <> <> <> 15706/MPSRPT_SETUPPerf.EXE
<> <> <> <> 2) Run the MPSRPT_SETUPPerf.exe on the server box.
<> <> <> <> 3) Wait for 10~15 minutes.
<> <> <> <> 4) Open Windows explorer, navigate to
<> <> <> <> %SYSTEMROOT%\MPSReports\Setup\Reports\cab\
<> <> <> <> 5) Send the .cab file to v-robeli@xxxxxxxxxxxxx with subject:
<> <> <> <> 38996660-Setup could not configure the default settings for
<Remote
<> <> <> <> Assistance.
<> <> <> <>
<> <> <> <> I am looking forward to hear from you.
<> <> <> <>
<> <> <> <> If you need further assistance, please don't hesitate to let me
<> <know.
<> <> <> <>
<> <> <> <> Best regards,
<> <> <> <>
<> <> <> <> Robert Li(MSFT)
<> <> <> <>
<> <> <> <> Microsoft CSS Online Newsgroup Support
<> <> <> <>
<> <> <> <> Get Secure! - www.microsoft.com/security
<> <> <> <>
<> <> <> <> =====================================================
<> <> <> <>
<> <> <> <> This newsgroup only focuses on SBS technical issues. If you have
<> <> issues
<> <> <> <> regarding other Microsoft products, you'd better post in the
<> <> <> corresponding
<> <> <> <> newsgroups so that they can be resolved in an efficient and
<timely
<> <> <> manner.
<> <> <> <> You can locate the newsgroup here:
<> <> <> <>
<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<> <> <> <>
<> <> <> <> When opening a new thread via the web interface, we recommend
you
<> <> check
<> <> <> <the
<> <> <> <> "Notify me of replies" box to receive e-mail notifications when
<> <there
<> <> <are
<> <> <> <> any updates in your thread. When responding to posts via your
<> <> <newsreader,
<> <> <> <> please "Reply to Group" so that others may learn and benefit
from
<> <your
<> <> <> <> issue.
<> <> <> <>
<> <> <> <> Microsoft engineers can only focus on one issue per thread.
<> Although
<> <> we
<> <> <> <> provide other information for your reference, we recommend you
<post
<> <> <> <> different incidents in different threads to keep the thread
<clean.
<> <In
<> <> <> <doing
<> <> <> <> so, it will ensure your issues are resolved in a timely manner.
<> <> <> <>
<> <> <> <> For urgent issues, you may want to contact Microsoft CSS
<directly.
<> <> <Please
<> <> <> <> check http://support.microsoft.com for regional support phone
<> <numbers.
<> <> <> <>
<> <> <> <> Any input or comments in this thread are highly appreciated.
<> <> <> <>
<> <> <> <> =====================================================
<> <> <> <>
<> <> <> <> This posting is provided "AS IS" with no warranties, and confers
<no
<> <> <> <rights.
<> <> <> <>
<> <> <> <> --------------------
<> <> <> <> <Reply-To: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <> <> <> <From: "Andrew M. Saucci, Jr." <spam-only@xxxxxxxxxxxxxxxx>
<> <> <> <> <Subject: Setup could not configure the default settings for
<Remote
<> <> <> <> Assistance
<> <> <> <> <Date: Tue, 1 May 2007 13:56:21 -0400
<> <> <> <> <Lines: 72
<> <> <> <> <Organization: 2000 Computer Solutions, Inc.
<> <> <> <> <X-Priority: 3
<> <> <> <> <X-MSMail-Priority: Normal
<> <> <> <> <X-Newsreader: Microsoft Outlook Express 6.00.2800.1807
<> <> <> <> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1896
<> <> <> <> <Message-ID: <ezPFJoBjHHA.4132@xxxxxxxxxxxxxxxxxxxx>
<> <> <> <> <Newsgroups: microsoft.public.windows.server.sbs
<> <> <> <> <NNTP-Posting-Host: mail.2csiliny.com 216.254.70.209
<> <> <> <> <Path:
<> <> TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP05.phx.gbl
<> <> <> <> <Xref: TK2MSFTNGHUB02.phx.gbl
<> <> microsoft.public.windows.server.sbs:33845
<> <> <> <> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <> <> <> <
<> <> <> <> < Has anyone seen this error before? It seems to be so
<> <> <mysterious
<> <> <> <> that
<> <> <> <> <no one has posted about it on Google and Microsoft doesn't have
<a
<> <KB
<> <> <on
<> <> <> <it.
<> <> <> <> <I've tried reinstalling the Administration component several
<times
<> <> and
<> <> <> <keep
<> <> <> <> <getting the same result. Here's my errorlog.txt:
<> <> <> <> <
<> <> <> <> <[05/01/07,11:11:20] Microsoft Integration: [2]
<> <> <> <> <ISetupDataFile::GetPropertyValue() failed for account
<information
<> <in
<> <> <> <> <ISetupManager::LoadPersistantComponentData(): filename =
<> C:\Program
<> <> <> <> <Files\Microsoft Integration\Windows Small Business Server
<> <> <> <2003\REBOOT.INI,
<> <> <> <> <component ID =
<> <> <> <>
<> <> <>
<> <>
<>
<<<<<{829300FF-C155-11D2-92EF-00C04F79F1A8}\{DC3074B0-7DE8-43C5-B907-E9100CB
5
<> F
<> <> F
<> <> <> F
<> <> <> <> 2
<> <> <> <> <}, property name = (null)
<> <> <> <> <[05/01/07,11:11:21] Microsoft Integration: [2]
<> <> <> <> <ISetupDataFile::GetPropertyValue() failed for account
<information
<> <in
<> <> <> <> <ISetupManager::LoadPersistantComponentData(): filename =
<> C:\Program
<> <> <> <> <Files\Microsoft Integration\Windows Small Business Server
<> <> <> <2003\REBOOT.INI,
<> <> <> <> <component ID =
<> <> <> <>
<> <> <>
<> <>
<>
<<<<<{829300FF-C155-11D2-92EF-00C04F79F1A8}\{F333D98A-C152-11D2-92EF-00C04F7
9
<> F
<> <> 1
<> <> <> A
<> <> <> <> 8
<> <> <> <> <}, property name = (null)
<> <> <> <> <[05/01/07,11:11:22] setup.exe: [2]
<> <> <> ISetupManager::AddGlobalCustomProperty
<> <> <> <> <failed in ISetupManager::LoadPersistantData()
<> <> <> <> <({df8ff64a-1967-4871-9e32-ca2f819bab81})
<> <> <> <> <[05/01/07,11:11:22] setup.exe: [2]
<> <> <> ISetupManager::AddGlobalCustomProperty
<> <> <> <> <failed in ISetupManager::LoadPersistantData()
<> <> <> <> <({c248d3e3-632d-4435-888a-83035c144737})
<> <> <> <> <[05/01/07,11:27:06] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
<> <> <> <> <[05/01/07,11:27:11] Licensing: [2] Copying sbsmor.chm failed
<> (error
<> <=
<> <> <> 5).
<> <> <> <> <Check for the file in %winroot%\help directory.
<> <> <> <> <[05/01/07,11:27:12] Licensing: [2] Copying sbslic.chm failed
<> (error
<> <=
<> <> <> 5).
<> <> <> <> <Check for the file in %winroot%\help directory.
<> <> <> <> <[05/01/07,11:27:12] Licensing: [2] Copying sbsart.chm failed
<> (error
<> <=
<> <> <> 5).
<> <> <> <> <Check for the file in %winroot%\help directory.
<> <> <> <> <[05/01/07,11:27:12] Licensing: [2] Copying sbsshared.chm failed
<> <> (error
<> <> <=
<> <> <> <> 5).
<> <> <> <> <Check for the file in %winroot%\help directory.
<> <> <> <> <[05/01/07,11:27:15] Licensing: [2] FindLinkByTarget failed to
<find
<> <> the
<> <> <> <> <licensing link with error [-2147024894].
<> <> <> <> <[05/01/07,11:27:15] Licensing: [2] UpdateLinkPath failed to
<update
<> <> the
<> <> <> <> <licensing link with error [-2147024893].
<> <> <> <> <[05/01/07,11:27:24] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
<> <> <> <> <[05/01/07,11:27:24] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
<> <> <> <> <[05/01/07,11:27:30] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
<> <> <> <> <[05/01/07,11:27:36] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
<> <> <> <> <[05/01/07,11:27:43] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{FBCCE6F3-9E2D-464D-A4E7-12FBFD515395}
<> <> <> <> <[05/01/07,11:27:46] WizardUI: [2]
<> <> <> <ISetupManager::GetGlobalCustomProperty()
<> <> <> <> <failed in CPageBase::GetGlobalProperty(): GUID =
<> <> <> <> <{F205AE18-9D39-4E3C-A4BA-12FBA060ED91}
<> <> <> <> <[05/01/07,11:30:07] Administration: [2] Setup could not
<configure
<> <the
<> <> <> <> <default settings for Remote Assistance. This might indicate
that
<a
<> <> <> <problem
<> <> <> <> <exists in your Windows Small Business Server 2003 installation.
<It
<> <is
<> <> <> <> <recommended that you run Setup again.
<> <> <> <> <[05/01/07,11:30:07] Administration: [2] Setting the Remote
<> <Assistance
<> <> <> <> Policy
<> <> <> <> <failed with error [0x80070003].
<> <> <> <> <[05/01/07,11:31:08] Client Deployment: [2] Failed to set DACL
to
<> <> <> <C:\Program
<> <> <> <> <Files\Microsoft Windows Small Business
<Server\ClientSetup\Clients
<> <[1]
<> <> <> <> <[05/01/07,11:31:08] Client Deployment: [2] Failed to set DACL
to
<> <> <> <> <C:\ClientApps [1]
<> <> <> <> <[05/01/07,11:38:45] Networking: [2] Failed to stop the POP3
<> <Connector
<> <> <> <> <service with error [80070426].
<> <> <> <> <
<> <> <> <> <
<> <> <> <> <
<> <> <> <>
<> <> <> <
<> <> <> <
<> <> <> <
<> <> <>
<> <> <
<> <> <
<> <> <
<> <>
<> <
<> <
<> <
<>
<
<
<
.
- References:
- Setup could not configure the default settings for Remote Assistance
- From: Andrew M. Saucci, Jr.
- RE: Setup could not configure the default settings for Remote Assistance
- From: Robert Li [MSFT]
- Re: Setup could not configure the default settings for Remote Assistance
- From: Andrew M. Saucci, Jr.
- Re: Setup could not configure the default settings for Remote Assistance
- From: Robert Li [MSFT]
- Re: Setup could not configure the default settings for Remote Assistance
- From: Andrew M. Saucci, Jr.
- Re: Setup could not configure the default settings for Remote Assistance
- From: Robert Li [MSFT]
- Re: Setup could not configure the default settings for Remote Assistance
- From: Andrew M. Saucci, Jr.
- Re: Setup could not configure the default settings for Remote Assistance
- From: Robert Li [MSFT]
- Re: Setup could not configure the default settings for Remote Assistance
- From: Andrew M. Saucci, Jr.
- Setup could not configure the default settings for Remote Assistance
- Prev by Date: RE: Kerebros Errors
- Next by Date: RE: Installation of SBS 2003 SP1 Failed on Networking
- Previous by thread: Re: Setup could not configure the default settings for Remote Assistance
- Next by thread: Re: Event IDs - Error Codes
- Index(es):
Relevant Pages
|
