RE: SharePoint Products and Technologies Configuration Wizard Bomb

Hello Customer,

Thank you for kind update.

Please understand that our newsgroup is an issue based service, meaning we
usually respond to one question/issue per post. This will lessen the
confusion for both of us, as well as ensure that our results are accurate
and not a result of a test for a different question. Therefore, I will work
with you on the WSS question in this post. Regarding the additional
question (backup and OWA issue), I suggest you create a new post for
getting more quick assistance.

Are you running .Net Framework 2.0 now? If so, open the IIS management
snap-in and change the .Net Framework back to 1.1.4322. To do so:

1. Go to the properties of companyweb.
2. Go to the ASP.NET tab.
3. On the ASP.NET version select the drop-down and change from the
2.0.50727 to 1.1.4322.
4. Apply and close out the properties.

Try to browse http://companyweb again and see how it geos.

If you want to run companyweb on ASP.NET 2.0.50727 you will need to run the
following sharepoint command:

stsadm.exe -o upgrade -forceupgrade -url http://companyweb

Refer to the following Knowledge Base article for more information:

894903 You receive a "The Windows SharePoint Services virtual server has
not been configured for use with ASP.NET 2.0.xxxxx.0" error message when
you connect to the home page of a Windows SharePoint Services Web site
http://support.microsoft.com/?id=894903

If running this command does not fix the issue, then you will need to
confirm that your WSS is actually at SP2.

1. Start SharePoint Central Administration.

2. Under "Virtual Server Configuration" on the Windows SharePoint Services
Central Administration page, click "Configure virtual server settings".

3. Under "Version" on the Virtual Server List page, note the version number
that is listed for the virtual server, and then use one of the following
methods, depending on your situation:

The version numbers are listed as follows:

- 6.0.2.5530 is the version number of the virtual server in the original
release version of Windows SharePoint Services.

- 6.0.2.6361 is the version number of the virtual server in Windows
SharePoint Services Service Pack 1 (SP1).

- 6.0.2.6411 is the version number of the virtual server in Windows
SharePoint Services that has the security update installed that is
described in the following article in the Microsoft Knowledge Base:

887981 MS05-006: Vulnerability in Windows SharePoint Services and
SharePoint Team Services could allow cross-site scripting and spoofing
attacks
http://support.microsoft.com/?id=887981

- 6.0.2.6568 is the version number of the virtual server in Windows
SharePoint Services Service Pack 2 (SP2).

If the version number is less than 6.0.2.6568, the virtual server is not at
SP2.

Go to our Microsoft site and download the WSS SP2. After installing it try
to access companyweb.

If the issue persists, please gather the following info and send them to
v-terliu@xxxxxxxxxxxxx for research.

IIS Metabase.

a. Download the IIS Resource Kit tools from the following page:
http://www.microsoft.com/downloads/details.aspx?FamilyId=56FC92EE-A71A-4C73-
B628-ADE629C89499&displaylang=en
b. Install it, run MBExplorer (Metabase Explorer)
c. Right click the "LM" node and choose "Export to file".
d. Specify a file name, specify the password and finish the export.
e. Send the file and the password to v-bpeng@xxxxxxxxxxxxxx

Hope this helps.

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| Thread-Topic: SharePoint Products and Technologies Configuration Wizard
Bomb
| thread-index: AcecG51P1G5CrG0UTk+dBvfHarrFIg==
| X-WBNR-Posting-Host: 207.46.192.207
| From: =?Utf-8?B?S3VydExvbmdob3Ju?=
<KurtLonghorn@xxxxxxxxxxxxxxxxxxxxxxxxx>
| References: <17051C5D-6E56-4216-951D-D9972D01085F@xxxxxxxxxxxxx>
<k#0PfK3mHHA.5168@xxxxxxxxxxxxxxxxxxxxxx>
| Subject: RE: SharePoint Products and Technologies Configuration Wizard
Bomb
| Date: Mon, 21 May 2007 19:48:02 -0700
| Lines: 168
| Message-ID: <2B56CAD5-FCBA-4A00-B936-4CF91C2A29FB@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2826
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:38469
| NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Terrence--
|
| Thank you for your prompt reply. Unfortunately I can no longer access
| SharePoint Central Administration (or any other of my http://localhost/
| sites). I continue to be able to access http://companyweb without
problem
| but my //localhost/exchange is HTTP 404 not found while
//localhost/backup
| and/remote are HTTP 403 Forbidden access is denied.
|
| For SharePoint Central Administration I receive a red "Server Application
| Unavailable." I believe my problems resulted from improperly extending
the
| virtual servers AND also changing ASP.NET 1.1 to 2.0 on several.
Obviously
| changing them back is problematic. I also followed KB894903 to attemp to
use
| stsadm but it bombed on me (kept asking for more and more parameters).
|
| I appreciate your help. Seeking a solution obviously made it worse.
|
| "Terence Liu [MSFT]" wrote:
|
| > Hello Customer,
| >
| > Thank you for posting here.
| >
| > According to your description, I understand that you get error "Most
likely
| > this virtual server is not extended with WSS v2" when you run
prescan.exe
| > tool. If I have misunderstood the problem, please don't hesitate to let
me
| > know.
| >
| > Based on my research, this issue occurs when the Windows SharePoint
| > Services 2.0 configuration database is corrupted.
| >
| > To resolve this issue, follow these steps:
| >
| > 1. Click Start, point to Administrative Tools, and then click
SharePoint
| > 3.0 Central Administration.
| >
| > 2. On the SharePoint Central Administration Web page and create a new
| > configuration database.
| >
| > 3. For each virtual server that was extended, click Configure Virtual
| > Server Settings, select Remove Windows Sharepoint Services from Virtual
| > Server, and remember to keep the existing content databases.
| >
| > 4. Re-extend the virtual server by using a blank content database
| >
| > 5. Under Manage Content Databases, remove the blank content DB, and
then
| > add the existing content database.
| >
| > Meanwhile, I suggest you perform the steps in the following document to
| > install WSS 2.0 and 3.0 side by side:
| >
| > Installing Windows SharePoint Services 3.0 on a Server Running Windows
| > Small Business Server 2003
| >
http://www.microsoft.com/downloads/details.aspx?FamilyID=0daafc81-efff-4f5b-
| > a28a-8265f1e99f5b&displaylang=en
| >
| > If we can not resolve the issue after we perform the above steps,
please
| > kindly help me collect some information for further investigation:
| >
| > 1. Please capture screenshots on the error messages and send the
pictures
| > to me at v-terliu@xxxxxxxxxxxxx
| >
| > 2. Use the MPS report utility to capture the Server logs and
configurations:
| >
| > a. Download MPS report tool from:
| >
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd9
| > 15706/MPSRPT_SETUPPerf.EXE
| >
| > b. Run the MPSRPT_SETUPPerf.exe on the server box.
| >
| > c. Wait for 10~15 minutes.
| >
| > d. Open Windows explorer, navigate to
| > %SYSTEMROOT%\MPSReports\Setup\Reports\cab\
| >
| > e. Send the .cab file to me at v-terliu@xxxxxxxxxxxxx
| >
| > Hope these steps will give you some help.
| >
| > Thanks and have a nice day!
| >
| > Best regards,
| >
| > Terence Liu(MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| > --------------------
| > | Thread-Topic: SharePoint Products and Technologies Configuration
Wizard
| > Bombs
| > | thread-index: Acea486JKDqIW9B9Sy2zSFhwtH8feg==
| > | X-WBNR-Posting-Host: 207.46.193.207
| > | From: =?Utf-8?B?S3VydExvbmdob3Ju?=
| > <KurtLonghorn@xxxxxxxxxxxxxxxxxxxxxxxxx>
| > | Subject: SharePoint Products and Technologies Configuration Wizard
Bombs
| > | Date: Sun, 20 May 2007 06:36:01 -0700
| > | Lines: 20
| > | Message-ID: <17051C5D-6E56-4216-951D-D9972D01085F@xxxxxxxxxxxxx>
| > | MIME-Version: 1.0
| > | Content-Type: text/plain;
| > | charset="Utf-8"
| > | Content-Transfer-Encoding: 7bit
| > | X-Newsreader: Microsoft CDO for Windows 2000
| > | Content-Class: urn:content-classes:message
| > | Importance: normal
| > | Priority: normal
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2826
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | Path: TK2MSFTNGHUB02.phx.gbl
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:38078
| > | NNTP-Posting-Host: tk2msftibfm01.phx.gbl 10.40.244.149
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | I am running SBS r2 and attempting to install WSS 2.0 and 3.0 side by
| > side.
| > |
| > | I have installed SharePoint 3.0 which gives me the prescan tool which
| > gives
| > | me an error and causes the Wizard to crash on Step 2 of 10.
| > |
| > | The problem appears to be in this virtual server, which prescan says
is
| > not
| > | extended: the prescan error is as follows:
| > | Most likely this virtual server is not extended with WSS v2.
| > |
| > | This is in reference to one of my virtual servers, which appears as
| > follows:
| > | Microsoft SharePoint Administration http://klserver:3101/ 6.0.2.8117
Not
| > | Administrable
| > |
| > | How can I extend this virtual server if it is not administrable? How
can
| > I
| > | get a clean prescan so I can continue with the 3.0 wizard?
| > |
| > | I was asked to post in SBS 2003 instead of SharePoint & SBS's unique
| > | problem. I was following the White Paper, trying to complete the
Wizard,
| > | when it bombed.
| > |
| > |
| >
| >
|

.

Relevant Pages

  • RE: Cannot reinstall SharePoint Services 2.0
    ... Since you have got help for our CSS, ... Microsoft CSS Online Newsgroup Support ... Cannot reinstall SharePoint Services 2.0 ...
    (microsoft.public.windows.server.sbs)
  • Re: installing smtp virtual server under iis for sbs 2003
    ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ... <Subject: Re: installing smtp virtual server under iis for sbs 2003 ...
    (microsoft.public.windows.server.sbs)
  • Re: installing smtp virtual server under iis for sbs 2003
    ... A way to rule out that would be to stop default SMTP ... virtual server, create a new SMTP virtual server, make it listen on "All ... Microsoft CSS Online Newsgroup Support ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Companyweb after SP1 - Web Part Error
    ... thank you for using Microsoft newsgroup. ... click "Configure virtual server settings". ... |> original release version of Windows SharePoint Services. ...
    (microsoft.public.windows.server.sbs)
  • RE: MSSQL$Sharepoint service is Stopped SP1
    ... please post this question to partner DirectAccess newsgroup. ... Microsoft CSS Online Newsgroup Support ... >> remove and reinstall Windows SharePoint Services companyweb Web site. ... >> | uninstall the Intranet components of SBS, ...
    (microsoft.public.windows.server.sbs)