Re: Issue with Cisco VPN after adding second NIC to server...

How do I enable IP routing?

I just went into Routing and Remote Access, went to my server, went to
NAT/Basic Firewall, chose my External NIC, and it's selected as public
interface with access to the internet, using NAT and basic firewall.
I have a firewall (the PIX) so can I just turn this off?

I went to the services and ports tab, selected VPN Gateway (IPsec/IKE)
and entered in my internal NIC address (192.168.1.2).

When I connect to the VPN now, I still can't ping my external NIC or
my internal NIC.

- Anthony

.

Relevant Pages

  • Re: PC Anywhere
    ... if you have ISA you don't have the basic firewall anymore. ... > What I see under the IP Routing is: ... >>>> one for port 5631 point it to the IP address of the work station you ... I went into Administrative Tools> Routing and Remote Access ...
    (microsoft.public.windows.server.sbs)
  • Re: Opening port on standard firewall
    ... If you go to Routing and Remote Access, go under IP Routing and then ... NAT/Basic Firewall, then right click on the NIC connected to the internet ... How and where can I open the port 8055 on the ...
    (microsoft.public.windows.server.sbs)
  • How can I solve service specific error 213005
    ... Open the Routing and Remote Access administrator. ... configure for use minus Nat / Basic Firewall then check ...
    (microsoft.public.isaserver)
  • RE: view SBS standard (non-isa) firewall settings?
    ... To access you firewall settings: ... Routing and Remote Access. ... Expand ServerName>Ip Routing ... >review the SBS built-in firewall settings but don't know how. ...
    (microsoft.public.windows.server.sbs)
  • RE: [fw-wiz] Dynamic routing on a firewall
    ... do not let firewall participate in routing protocols. ... the security features in the routing protocol, ... A firewall can not really do much more than the security ... Each party is in their own DMZ. ...
    (Firewall-Wizards)