Re: XP x64 Client won't connect to domain with ISA client installe
- From: "Charlie Russel - MVP" <charlie@xxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 17 Apr 2007 07:29:36 -0700
I created a group of computers in ISA that I called "x64 computers". Designated by IP address range. I then created a rule that gave them full access. Finally, I used DHCP reservations to make sure that my x64 computers were in that range.
--
Charlie.
http://msmvps.com/blogs/xperts64
"Stuart" <Stuart@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:F10CB07B-5783-4D7B-850F-FA6FC3B04012@xxxxxxxxxxxxxxxx
Hi Charlie,
Thanks for the reply. I disabled the RPC filter but it didn't change
anything about the symptoms. What kind of custom ISA rule are you suggesting
I create?
Stuart
"Charlie Russel - MVP" wrote:
Disable the RPC Filter until you're joined to the domain. And if worse comes
to worse, give your XP x64 client a DHCP reservation, and then create a
custom ISA rule for that client IP address.
--
Charlie.
http://msmvps.com/xperts64
http://mvp.support.microsoft.com/profile/charlie.russel
"Stuart" <Stuart@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:3F4C99FC-4083-4D3C-BE39-71910C4882D5@xxxxxxxxxxxxxxxx
>I just got around to installing ISA server 2004 w/SP2. That did not >change
> my symtoms at all. I still can't get on the domain with the 64bit ISA
> client
> installed on my XP x64 Pro client. Does anyone have an idea??
>
> "Stuart" wrote:
>
>>
>> Thanks for the replies guys.
>> Chris, that is the version of the client that I have.
>> Charlie, I've got ISA Server 3.0.1200.365 SP2. Which I think is ISA
>> 2000?
>> The client software claims compatability with ISA 2000. Is that not
>> really
>> the case?
>>
>> Thanks,
>> Stuart
>>
>> "Charlie Russel - MVP" wrote:
>>
>> > You don't specify which version of ISA server you are running. But >> > if
>> > you
>> > are at less than ISA 2k4 SP2, you need to update to it.
>> >
>> >
>> > -- >> > Charlie.
>> > http://msmvps.com/xperts64
>> >
>> >
>> > "Stuart" <Stuart@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> > news:C334031D-1A27-462D-B2D3-9462023DAC4D@xxxxxxxxxxxxxxxx
>> > >I have a new client computer with XP x64 installed. I tracked down
>> > >the 64
>> > > bit isa client and installed it. It works until I reboot the >> > > client
>> > > and
>> > > then
>> > > I can't get it to connect to the domain.
>> > >
>> > > I get event ID 5719, Source NETLOGON, on the client
>> > > ------------------------------------------------------------------------------
>> > > "This computer was not able to set up a secure session with a >> > > domain
>> > > controller in domain PES due to the following:
>> > > There are currently no logon servers available to service the >> > > logon
>> > > request.
>> > > This may lead to authentication problems. Make sure that this
>> > > computer is
>> > > connected to the network. If the problem persists, please contact
>> > > your
>> > > domain
>> > > administrator."
>> > > ----------------------------------------------------------------------------------
>> > > I can then unistall the client and get back on the domain at next
>> > > boot.
>> > >
>> > > Any ideas????
>> > >
>> > > Thanks
>> > > Stuart
>> >
.
- References:
- Re: XP x64 Client won't connect to domain with ISA client installe
- From: Charlie Russel - MVP
- Re: XP x64 Client won't connect to domain with ISA client installe
- From: Stuart
- Re: XP x64 Client won't connect to domain with ISA client installe
- Prev by Date: Re: Win SBS 2003 Backup Solutions?
- Next by Date: Re: 802.1x authentication for wireless issues w/ ISA 2004
- Previous by thread: Re: XP x64 Client won't connect to domain with ISA client installe
- Next by thread: Re: XP x64 Client won't connect to domain with ISA client installed
- Index(es):
Relevant Pages
|
