RE: Remote Access Wizard Error

Hello Richard,

Thank you for kind update.

The Windows Server 2003 sp1 is not equal to SBS 2003 sp1. And the SBS 2003
sp2 is not release till now.

Therefore, please let me know the detail version of your SBS.

Anyway, please go through the following document to install SBS 2003 sp1:

Downloading and Installing Windows Small Business Server 2003 Service Pack 1
http://download.microsoft.com/download/e/0/f/e0fee8ce-768d-41c0-8871-9bc48e0
b3fc3/ToDownLoadFilesandReadInstructions.htm

The SBS 2003 sp1 standard edition including the following components:

Windows Server 2003 Service Pack 1
Windows SharePoint Services 2.0 Service Pack 1
Exchange Server 2003 Service Pack 1
Windows XP SP2 for Client Deployment
Windows Small Business Server 2003 Service Pack 1

If you had already installed windows server 2003 sp2 on the SBS before you
install SBS 2003 sp1, you no need to uninstall windows server 2003 sp2
before you install SBS 2003 sp1. You can just jump over the windows server
2003 sp1 installation step in above document.

If the issue persists, please kindly help me collect some information for
further investigation:

Please use the Networking MPS report to collect the server event logs and
other configuration info:

a. Download MPSreport_network from
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd9
15706/MPSRPT_NETWORK.EXE

b. Run MPSRPT_NETWORK.exe on the server box.

c. The tool will automatically collect the information. This procedure will
take 10~15 minutes.

d. Open Windows Explorer, navigate to the folder:
%SystemRoot%\MPSReports\Network\Reports\Cab\

e. Send the .cab file directly to my mailbox: v-terliu@xxxxxxxxxxxxx

Hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| Thread-Topic: Remote Access Wizard Error
| thread-index: AceAUwSAjGQXlB2kT8m7ts4jnWx1tw==
| X-WBNR-Posting-Host: 207.46.19.168
| From: =?Utf-8?B?UmljaGFyZF9SQUQ=?= <RichardRAD@xxxxxxxxxxxxxxxxxxxxxxxxx>
| References: <961364B4-0B34-4607-9DBE-EE3839DE189E@xxxxxxxxxxxxx>
<Vqmr7w#fHHA.4692@xxxxxxxxxxxxxxxxxxxxxx>
| Subject: RE: Remote Access Wizard Error
| Date: Mon, 16 Apr 2007 11:14:04 -0700
| Lines: 225
| Message-ID: <1E2FC56A-FCA7-4108-9816-C1A75D7184E2@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:30514
| NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| Hi Terrence,
| Thanks for your response. I am actually already on Windows Server 2003
| Service Pack 2. Did not see a Windows Small Business Server 2003 Service
Pack
| 2, and the link to Win SBS 2003 SP 1 seems broken.
|
| My version info:
| Version 5.2 (Build 3790.srv03_sp2_gdr.070304-2240: Service Pack 2)
|
| There were severe warnings about removing a service pack, what do you
| recommend? Should I remove Service Pack 2?
|
| Thanks,
| Richard
|
| --
| Richard
|
|
| "Terence Liu [MSFT]" wrote:
|
| > Hello Richard,
| >
| > Thank you for posting here.
| >
| > According to your description, I understand that you get error "An
error
| > occurred while creating the Connection Manager Configuration package
file."
| > when you run Remote Access Wizard. If I have misunderstood the problem,
| > please don't hesitate to let me know.
| >
| > Based on my research, this is a known issue when you install windows
2003
| > sp1 on SBS 2003.
| >
| > To resolve this problem, follow these steps:
| >
| > 1. Remove Windows Server 2003 SP1. To do this, follow these steps:
| >
| > a. Click Start, point to Control Panel, and then click Add or Remove
| > Programs.
| >
| > b. In the Add or Remove Programs dialog box, click Windows Server 2003
| > Service Pack 1, and then click Remove.
| >
| > c. In the Windows Server 2003 Service Pack 1 Removal Wizard, click Next
to
| > remove the service pack.
| >
| > 2. Run the Remote Access Wizard again. To do this, follow these steps:
| >
| > a. Click Start, and then click Server Management.
| >
| > b. In the console tree, click Internet and E-mail.
| >
| > c. In the details pane, click Configure Remote Access.
| >
| > d. Follow the instructions on the screen to complete the wizard.
| >
| > Meanwhile, this problem is corrected in Windows Small Business Server
2003
| > SP1. Therefore, if you do not want to remove windows 2003 sp1 from SBS
| > 2003, we suggest you install SBS 2003 sp1 on your SBS:
| >
| > Service Pack 1 for Windows Small Business Server 2003, Standard Edition
| >
http://download.microsoft.com/download/d/5/b/d5be2c2c-b1cb-47f8-9235-8cf8982
| > 0139e/Readme_std.htm
| >
| > For more info, please go the following KB:
| >
| > Known issues that may occur if you install Windows Server 2003 SP1 on
| > Windows Small Business Server 2003
| > http://support.microsoft.com/?id=897342
| >
| > Hope these steps will give you some help.
| >
| > Thanks and have a nice day!
| >
| > Best regards,
| >
| > Terence Liu(MSFT)
| >
| > Microsoft CSS Online Newsgroup Support
| >
| > Get Secure! - www.microsoft.com/security
| >
| > =====================================================
| > This newsgroup only focuses on SBS technical issues. If you have issues
| > regarding other Microsoft products, you'd better post in the
corresponding
| > newsgroups so that they can be resolved in an efficient and timely
manner.
| > You can locate the newsgroup here:
| > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
| >
| > When opening a new thread via the web interface, we recommend you check
the
| > "Notify me of replies" box to receive e-mail notifications when there
are
| > any updates in your thread. When responding to posts via your
newsreader,
| > please "Reply to Group" so that others may learn and benefit from your
| > issue.
| >
| > Microsoft engineers can only focus on one issue per thread. Although we
| > provide other information for your reference, we recommend you post
| > different incidents in different threads to keep the thread clean. In
doing
| > so, it will ensure your issues are resolved in a timely manner.
| >
| > For urgent issues, you may want to contact Microsoft CSS directly.
Please
| > check http://support.microsoft.com for regional support phone numbers.
| >
| > Any input or comments in this thread are highly appreciated.
| > =====================================================
| >
| > This posting is provided "AS IS" with no warranties, and confers no
rights.
| >
| > --------------------
| > | Thread-Topic: Remote Access Wizard Error
| > | thread-index: Acd+J0lxu1thyoIMSJ21DNrGyyf39g==
| > | X-WBNR-Posting-Host: 207.46.199.61
| > | From: =?Utf-8?B?UmljaGFyZF9SQUQ=?=
<RichardRAD@xxxxxxxxxxxxxxxxxxxxxxxxx>
| > | Subject: Remote Access Wizard Error
| > | Date: Fri, 13 Apr 2007 16:56:00 -0700
| > | Lines: 89
| > | Message-ID: <961364B4-0B34-4607-9DBE-EE3839DE189E@xxxxxxxxxxxxx>
| > | MIME-Version: 1.0
| > | Content-Type: text/plain;
| > | charset="Utf-8"
| > | Content-Transfer-Encoding: 7bit
| > | X-Newsreader: Microsoft CDO for Windows 2000
| > | Content-Class: urn:content-classes:message
| > | Importance: normal
| > | Priority: normal
| > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
| > | Newsgroups: microsoft.public.windows.server.sbs
| > | Path: TK2MSFTNGHUB02.phx.gbl
| > | Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:29980
| > | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
| > | X-Tomcat-NG: microsoft.public.windows.server.sbs
| > |
| > | First time user of SBS. Configuration is HP server with single NIC
behind
| > a
| > | Linksys RV082 router.
| > |
| > | Running the Configure Remote Access wizard from the To Do List gives
this
| > | error:
| > |
| > | An error occurred while creating the Connection Manager configuration
| > | package file. For details, see c:\...\rraslog.txt, and then rerun the
| > Remote
| > | Access Wizard.
| > |
| > | The rraslog.txt file contains this:
| > | 4/10/2007 2:42 PM
| > | C:\Program Files\Microsoft Windows Small Business
| > | Server\Networking\RRASWiz\wizrras.dll, version 5.2.2893.0
| > | Calling CRRASCommit::CommitEx
| > | Calling CRRASCommit::ValidatePropertyBag
| > | pdispPPPBag->QueryInterface returned OK
| > | PropertyBag 26b890
| > | Reading property value for enabling Remote Access returned OK
| > | bRemoteAccess = 1
| > | Reading property value for VPN returned OK
| > | bVPN = 1
| > | Reading property value for RAS returned OK
| > | bRAS = 0
| > | Calling CRRASCommit::ValidateVPNProperties
| > | Reading VPN Server Name returned OK
| > | VPN Server Name is wsrsbs.wriHQ.com
| > | Calling CRRASCommit::ValidateDHCPProperties
| > | DHCP server is installed on the box
| > | CRRASCommit::ValidateDHCPProperties returned OK
| > | CRRASCommit::ValidateVPNProperties returned OK
| > | CRRASCommit::ValidatePropertyBag returned OK
| > | pdispPPPBag->QueryInterface returned OK
| > | Pointer to the property bag 26b890
| > | Calling CRRASCommit::CommitRRAS
| > | Arguments:
| > | PropertyBag 26b890
| > | bRAS 0
| > | bVPN 1
| > | Getting the GUID of the private NIC returned OK
| > | Private NIC Guid is {BBC806BE-C1F5-481E-BAB5-707334668212}
| > | Checking whether RRAS is already running returned OK
| > | RRAS already running
| > | Stopping RRAS returned OK
| > | Installing RRAS returned OK
| > | Dhcp server is installed and running on this box
| > | Enabling DHCP client addressing returned OK
| > | Configuring ports returned OK
| > | Identifying the private NIC for RAS returned OK
| > | Setting the default authentication methods returned OK
| > | Disabling NETBIOS for RAS returned OK
| > | Changing RRAS startup type to automatic returned OK
| > | Configuring Remote Access Policy returned OK
| > | *** Stopping RRAS again returned ERROR 80070426
| > | Starting RRAS service returned OK
| > | Disabling L2TP Ports returned OK
| > | Saving Dhcp Server IP returned OK
| > | Saving RRAS method returned OK
| > | Method is 2
| > | Where 1 = RAS, 2 = VPN 3 = both
| > | CRRASCommit::CommitRRAS returned OK
| > | Committing RRAS returned OK
| > | Calling CRRASCommit::CommitCMAK
| > | Arguments:
| > | PropertyBag 26b890
| > | bRAS 0
| > | bVPN 1
| > | Template file name is sbsvpn
| > | Reading VPN Server name returned OK
| > | Reading VPN Server name is wsrsbs.wriHQ.com
| > | Created temp directory CMP300.tmp
| > | Copying required template files to the temp directory returned OK
| > | Updating CMP template returned OK
| > | Updating CMS template returned OK
| > | Updating SED template returned OK
| > | Creating proxy configuration file returned OK
| > | *** Running IExpress to build the package returned ERROR 80070001
| > | Specifying error location (in CMAK) returned OK
| > | *** CRRASCommit::CommitCMAK returned ERROR 80070001
| > | *** CRRASCommit::CommitEx returned ERROR 80070001
| > |
| > | There were a couple of other posts with similar errors, tried those
| > | suggestions but still get the same error.
| > |
| > | Any help would be greatly appreciated.
| > |
| > | Thanks,
| > | --
| > | Richard
| > |
| >
| >
|

.

Relevant Pages

  • RE: Corrupted Recycle Bin
    ... I think this issue caused by you did not install SBS ... Downloading and Installing Windows Small Business Server 2003 Service Pack 1 ...
    (microsoft.public.windows.server.sbs)
  • RE: unable to install anything on Server 2003 SBS SP2 (windows ins
    ... Verify the SBS 2003 sp1 is installed on SBS: ... To successfully install SBS 2003 SP1, ... Downloading and Installing Windows Small Business Server 2003 Service Pack 1 ...
    (microsoft.public.windows.server.sbs)
  • Re: Adding SBS2003 to existing domain, assume DC role?
    ... Before running DCPROMO on the new Server (SBS 2003), ... Right after setting up the Windows Core OS, you boot up to the Windows ... Install Networking Components ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW fails at firewall configuration SBS SP2 - ISA SP3 Please Help.
    ... Please ensure that you have correctly install SBS 2003 sp1. ... Downloading and Installing Windows Small Business Server 2003 Service Pack 1http://download.microsoft.com/download/e/0/f/e0fee8ce-768d-41c0-8871- ... ...
    (microsoft.public.windows.server.sbs)
  • RE: trouble installing companyweb
    ... Since you joined the SBS 2003 to a Windows server 2000 domain, ... How to install Small Business Server 2003 in an existing Active Directory ... This KB is suit for the Windows server 2000 or 2003 domain. ...
    (microsoft.public.windows.server.sbs)