Re: CEICW fails at network

No Don't select the router option
Select Direct Broadband Connection and see what happens

Is this a Dell Server by chance?

If this doesn't resolve...I'd ask Dell to replace those Broadcom Nics...they have been causing trouble everywhere

--
Cris Hanna [SBS-MVP]
------------------------------
Please do not contact me directly, only respond in the Newsgroups
MVPs do not work for Microsoft
------------------------------
Send via Windows Mail on Vista Ultimate connected to SBS 2003 R2
"Ciel" <Ciel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:8FB30F91-B3DF-402A-BDC3-ABC4A90DA978@xxxxxxxxxxxxxxxx
Thanks for your assistance Cris,

ipconfig details below.

Yes, I have selected Broadband Router with IP Adrees, I have also tried it
using uPNP.

Regards

Windows IP Configuration

Host Name . . . . . . . . . . . . : pca-server
Primary Dns Suffix . . . . . . . : PCA2005.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : PCA2005.local

PPP adapter RAS Server (Dial In) Interface:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.250
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled

Ethernet adapter LAN:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 00-12-3F-75-21-84
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.1

Ethernet adapter WAN:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-10-18-14-56-92
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Disabled






"Cris Hanna [SBS-MVP]" wrote:

You have one nic connected to a switch with all pcs
You have second nic connected to the router?

Please run IPconfig /all on your server and post the "EXACT" output here

When you run the CEICW make sure you choose full time broadband connection
(hope thats the wording)

--
Cris Hanna [SBS-MVP]
-------------------------------------------------
Microsoft MVPs
Independent Experts (MVPs do not work for MS)
Real World Answers
---------------------------------------------------------
Please do not contact me directly regarding issues

"Ciel" <Ciel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1DF3F0E5-6682-44E1-BE6E-D3886AC98543@xxxxxxxxxxxxxxxx
>I have recently taken over the support of a site with SBS 2003 Premium
> Edition. The customer wanted to use RWW which was not previously setup.
> They
> are/were using Outlook Web Access to get to their emails remotely. The
> CEICW
> had not prevously been run on the server so I ran the wizard to setup > the
> RWW.
>
> The wizard failed at the Network part but I continued with the setup > and
> the
> other components configured ok.
>
> Now you cannot access OWA - Internet Explorer cannot display the > webpage.
> I
> have tried restoring the ISA 2004 conofiguration from a backup taken
> before
> the CEICW was run, but still no OWA access.
>
> The server has two network cards and is connected to the internet > through
> a
> Netgear modem/router
>
> The icwlog is as follows:
>
>
> 13/04/2007 3:48 PM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizinet.dll, version 5.2.2893.0
> calling CNetCommit::ValidatePropertyBag ().
> Call to Querying for the property bag () returned ok.
> Call to Reading hardware selection () returned ok.
> Hardware selection: 0
> Call to Validating hardware selection () returned ok.
> Call to Initializing the Stingray util in ValidateNICProperties ()
> returned
> ok.
> Call to Reading LAN NIC Guid () returned ok.
> LAN NIC Guid: {401B825A-D9F5-4DFC-A18C-527D6D2FF30E}
> Call to Validating LAN NIC Guid () returned ok.
> Call to Getting the IP address for the LAN NIC () returned ok.
> LAN NIC IP: 192.168.0.1
> Call to Validating NIC properties () returned ok.
> Broadband selection: 1
> Call to Validating broadband selection () returned ok.
> calling CNetCommit::ValidateRouterConnectionProperties ().
> Call to Reading UPNP selection () returned ok.
> NOT a UPnP router
> Call to Reading Router IP () returned ok.
> Router IP: 192.168.1.1
> Call to Validating Router IP () returned ok.
> Call to Reading preferred DNS server IP () returned ok.
> Preferred DNS server IP: 000.0.00.00- Edited
> Call to Validating preferred DNS server IP () returned ok.
> Call to Reading alternate DNS server IP () returned ok.
> Alternate DNS server IP: 69.172.100.7
> Call to Validating alternate DNS server IP () returned ok.
> Call to Validating preferred and alternate DNS servers () returned ok.
> Call to Reading router on second NIC () returned ok.
> Router is connected through the second NIC
> Call to Initializing the Stingray util in ValidateNICProperties ()
> returned
> ok.
> Call to Reading LAN NIC Guid () returned ok.
> LAN NIC Guid: {401B825A-D9F5-4DFC-A18C-527D6D2FF30E}
> Call to Validating LAN NIC Guid () returned ok.
> Call to Getting the IP address for the LAN NIC () returned ok.
> LAN NIC IP: 192.168.0.1
> Call to Reading 2nd NIC Guid () returned ok.
> External NIC Guid: {EA191A83-2A8D-4BA0-B0B8-665BA934F06E}
> Call to Validating external NIC Guid () returned ok.
> Call to Validating the external IP against LAT () returned ok.
> Call to CNetCommit::ValidateRouterConnectionProperties () returned ok.
>
> 13/04/2007 3:48 PM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizproxy.dll, version 5.2.2893.0
> CStingrayCommit::ValidatePropertyBag
> Call to Querying for IPropertyPagePropertyBag () returned ok.
> Call to Initializing the StringrayUtil () returned ok.
> Call to Reading the firewall selection () returned ok.
> Firewall selection: 0
> Call to CStingrayCommit::ValidatePropertyBag () returned ok.
>
> 13/04/2007 3:48 PM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
> Calling CCertCommit::ValidatePropertyBag
> Require SSL for OWA: 1
> Require SSL for Remote Portal: 1
> Require SSL for Monitoring: 0
> Require SSL for OMA: 0
> Require SSL for CompanyWeb: 0
> Require 128 Bit Encryption: 1
> Cert selection: -1
> CCertCommit::ValidatePropertyBag returned OK
>
> 13/04/2007 3:48 PM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
> calling CEmailCommit::ValidatePropertyBag ().
> calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, > 0x6e50c).
> Call to pdispPPPBag->QueryInterface () returned ok.
> calling ReadInt4 (0x2595c8, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
> Call to ReadInt4 () returned ok.
> The out param of ReadInt4() is -1.
> calling CValidatePropertyUtil.ValidatePropertyInteger ().
> Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
> Call to CEMailCommit::ValidatePropertyBag () returned ok.
> calling CNetCommit::Commit (2463176).
> calling CNetCommit::ValidatePropertyBag ().
> Call to Querying for the property bag () returned ok.
> Property bag is not dirty, skipping validation
> calling CNetCommit::Common ().
> calling CNetCommit::GetLanNicInfo ().
> LAN NIC Guid: {401B825A-D9F5-4DFC-A18C-527D6D2FF30E}
> Call to Converting LAN NIC Guid () returned ok.
> Call to Getting IP address for the LAN NIC () returned ok.
> Call to Reading in the LAN NIC info () returned ok.
> Call to Fixing the TCP/IP NIC Binding order () returned ok.
> Dhcp server is installed and not disabled
> Call to Set DHCP Server to start up automatically () returned ok.
> DNS server is installed and not disabled
> Call to Changing startup type for DNS () returned ok.
> Call to Clearing DNS server entries on the LAN NIC () returned ok.
> Call to Setting DNS server IP for the LAN NIC () returned ok.
> Call to Resetting DNS recursion timeout () returned ok.
> Call to Resetting client dns query timouts in config.dat () returned > ok.
> Call to DsGetDcName for local domain name () returned ok.
> calling CNetCommit::DoRouter ().
> Call to Converting external NIC guid () returned ok.
> Call to Clearing the default gateway on the LAN NIC () returned ok.
> Call to Clearing the default gateway on the external NIC () returned > ok.
> Call to Setting default gateway on the external NIC () returned ok.
> Call to Setting DNS forwarders () returned ok.
> Call to Clearing DNS servers on the external NIC () returned ok.
> Call to Making sure external NIC points to the local DNS server ()
> returned
> ok.
> Call to GetLocalDomainName () returned ok.
> Call to Deleting the DNS record for the external NIC () returned ok.
> Call to Preparing DNS for DNS listener reset () returned ok.
> Call to Resetting DNS listeners () returned ok.
> Error 0x80004005 returned from call to Disabling dns registration on > the
> external NIC().
> Error 0x80004005 returned from call to CNetCommit::DoRouter().
> Error 0x80004005 returned from call to Configuring for router
> connection().
> Error 0x80004005 returned from call to CNetCommit::Common().
> Error 0x80004005 returned from call to CNetCommit::Commit().
> CStingrayCommit::CommitEx
> CStingrayCommit::ValidatePropertyBag
> Call to Querying for IPropertyPagePropertyBag () returned ok.
> Call to Initializing the StringrayUtil () returned ok.
> Call to Reading the firewall selection () returned ok.
> Firewall selection: 0
> Call to CStingrayCommit::ValidatePropertyBag () returned ok.
> Call to Validating the property bag () returned ok.
> Call to Reading the guid for the LAN NIC () returned ok.
> Call to Getting the IP address for the LAN NIC () returned ok.
> Call to Getting the SM for the LAN NIC () returned ok.
> LAN NIC Info:
> Guid: {401B825A-D9F5-4DFC-A18C-527D6D2FF30E}
> IP: 192.168.0.1
> SM: 255.255.255.0
> Call to Removing RRAS NAT () returned ok.
> CStingrayCommit::DoGeneralConfiguration
> Call to Removing SBS access rules () returned ok.
> Call to Setting default logon domain for OMA () returned ok.
> Call to Configuring anonymous access for SBS dirs () returned ok.
> Call to Disabling auto discovery () returned ok.
> Call to Configuring IIS to listen only on the LAN () returned ok.
> Call to Setting local domain name () returned ok.
> Call to Disabling H323 application filter () returned ok.
> Call to Disabling active caching () returned ok.
> Call to Setting up web proxy listeners () returned ok.
> Call to CStingrayCommit::DoGeneralConfiguration () returned ok.
> Call to Doing general configuration () returned ok.
>
> 13/04/2007 3:48 PM
> Firewall Rule: SBS DHCP Client
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS HTTP 80 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS FTP 20 In CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS FTP 20 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS POP3 110 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS NTP 123 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS DnsLookupPredefinedType
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS IcmpPingQueryPredefinedType
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS IdentdPredefinedType
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS TS 3389 In CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS TS 3389 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS PptpReceivePredefinedType
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS PptpCallPredefinedType
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS FTP 21 In CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS FTP 21 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS SMTP 25 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS SmtpPredefinedType
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS NNTP 119 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS Remote Web Workplace CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: SBS NTP 123 Out CustomFilter
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business RPC over HTTP Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Business Card Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business CompanyWeb Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business TSWEB Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business RUP Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Monitoring Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business OMA Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business OWA Web Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Web Publishing Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Server All Users Protocol Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Internet Access Protocol Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Internet Access Protocol Rule 2
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Server Internet Access Site and Content > Rule
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Server Internet Access Site and Content > Rule
> 2
> Cannot find the firewall rule, ignoring the error
> Firewall Rule: Small Business Server All Users Site and Content Rule
> Cannot find the firewall rule, ignoring the error
> Call to Removing ISA2k related firewall rules () returned ok.
> Custom protocol name: SBS FTP 20 In CustomFilter
> Cannot find the custom protocol, ignoring the error
> Custom protocol name: SBS FTP 20 Out CustomFilter
> Cannot find the custom protocol, ignoring the error
> Custom protocol name: SBS NTP 123 Out CustomFilter
> Cannot find the custom protocol, ignoring the error
> Custom protocol name: SBS Remote Web Workplace CustomFilter
> Cannot find the custom protocol, ignoring the error
> Call to Removing ISA2k related custom protocols () returned ok.
> CStingrayCommit::DisableFirewall
> Call to Creating the access rule to allow inbound access (disable
> firewall)
> () returned ok.
> Call to Creating the access rule to allow outbound access (disable
> firewall)
> () returned ok.
> Call to CStingrayCommit::DisableFirewall () returned ok.
> Call to Disabling the firewall () returned ok.
> CStingrayCommit::FixAccessRuleOrders
> Call to Fixing the LAN access rule order () returned ok.
> Call to Fixing the Windows update Access rule order () returned ok.
> Call to Fixing the Internet Access rule order () returned ok.
> Call to CStingrayCommit::FixAccessRuleOrders () returned ok.
> Call to Fixing the access rule order () returned ok.
> Call to Saving ISA2k4 changes () returned ok.
> Call to Saving the last firewall selection () returned ok.
> Call to CStingrayCommit::CommitEx () returned ok.
> Calling CCertCommit::CommitEx
> Calling CCertCommit::ValidatePropertyBag
> Require SSL for OWA: 1

.

Relevant Pages

  • ICW Problem Error 0x80072581 Deleting the DNS record external NIC
    ... I am having major problems with the internet and email connection wizard in sbs 2004, curiously I have internet access however the wizard fails to complete during the network section when I try and add OWA and RWW web services. ... Server connects to the internet and provides access for server no clients attached as yet. ... Call to Reading hardware selection returned ok. ... Firewall Rule: SBS DHCP Client ...
    (microsoft.public.windows.server.sbs)
  • RE: ICW Error
    ... Error 0x80070057 returned from call to Reading the UPNP selection. ... SBS will attempt to detect and configure UPnP devices when running the SBS ... Please first make a full backup for the SBS 2003 Server. ... <Firewall Rule: SBS DHCP Client ...
    (microsoft.public.windows.server.sbs)
  • Re: ICW Error
    ... Error 0x80070057 returned from call to Reading the UPNP selection. ... SBS will attempt to detect and configure UPnP devices when running the SBS ... Please first make a full backup for the SBS 2003 Server. ... <Firewall Rule: SBS DHCP Client ...
    (microsoft.public.windows.server.sbs)
  • RE: ICW Error
    ... This newsgroup only focuses on SBS technical issues. ... Please first make a full backup for the SBS 2003 Server. ... <<Loading port mapping XML ... <<Firewall Rule: SBS DHCP Client ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW fails at network
    ... Install it from your SBS SP1 Disk ... Firewall Rule: SBS DHCP Client ... ignoring the error ... SBS HTTP 80 Out CustomFilter ...
    (microsoft.public.windows.server.sbs)