RE: Remote access issue: Unable to add the interface...

OK, maybe I was too fast on the gun there and didn't read the rest of your
message so ports may be ok. Sorry

When you are on the outside of the LAN and connect to the server how do you
connect? (what url?). Once logged in what do you see and how are you trying
to get to the clients? I curious as to which step the error occurs.

-Richard K

"Richard K" wrote:

Take a look at "cheat***" notes. You need to make sure port 4125 is also
open for RWW to work to the clients.

-Richard K


Incoming ports that should NOT be open
21 – FTP (File Transfer Protocol)
80 – HTTP (Internal Website)
23 – Telnet
3389- Not necessary, only needed inside the LAN. 3389 redirects to 4125

Incoming ports that SHOULD be open
25 – SMTP (Mail)
443 – HTTPS (SSL for Outlook Web Access - OWA)
444 – (CompanyWeb Intranet via Sharepoint)
1723 – VPN (PPTP) – Only if you are using VPN
4125 – Remote Web Workplace (RWW) so clients can connect to their internal
client machines from outside the building via \Remote.


"Wombat" wrote:


Hi,

I'm having a problem on a fairly new SBS 2003 R2 standard edition
server. The network is set up using a broadband firewall/router device
so the SBS only has one NIC. I'm able to access the server using RWW,
however I'm unable to connect to any client desktops from there. I 've
checked the event viewer and I have an error concerning Remote Acces:

Event ID: 20106

Unable to add the interface {59276C37-1DD6-4612-8C49-2C5FCA826AE2} with
the Router Manager for the IP protocol. The following error occured:
Cannot complete this function.

If I follow the link provided, I just get these possible solutions:

- The interface type is not dedicated
- The loopback and router is configured in Lanonly mode
- There is not enough memory

Routing and Remote Access service seems to be running fine, if I stop
and restart the service, the above error pops up again in the event
viewer.

Other then this, everything else seems to be working just fine. I
already tried running the Remote Access wizard again, with the same
result.

I have no idea how to solve this issue, I've googled but couldn't come
up with a solution :-(. Does anyone have any idea?

Thx for any help you can provide...

Wombat


--
Wombat
------------------------------------------------------------------------
Wombat's Profile: http://forums.techarena.in/member.php?userid=24530
View this thread: http://forums.techarena.in/showthread.php?t=723512

http://forums.techarena.in


.