Re: Hot swap disks in DL360 G3 - never done it before, just need some reassurance

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance



On Mar 17, 2:24 pm, "Anna Clark" <anna.clark(remove this)@verizon.net>
wrote:
Hi Kevin:

Please refer to the instructions for the system. If the drives are mirrored
by a hardware controller, there may be steps you will need to do.

If software mirrored, which I doubt, you must break the mirror, then remove
and replace the drive, then re mirror.
--
Regards:

Anna Clark
-----
Please do post the conclusion or solution
to your issue so that others may benefit.

"Kevin" <kjgoodri...@xxxxxxxxxxxxxx> wrote in message

news:1174128724.113947.276590@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Hi there, I'm managing an HP DL360 G3 server with 2 x 36GB SCSI disks
which are mirrored. This morning I woke to an email from the server
informing me that disk 1 had failed.

The machine otherwise is running perfectly.

Currently I'm sourcing a spare drive.

My 1st question is, having never done this before, can I just remove
the failed drive without shutting the machine down and simply insert
the new drive? Will Windows sort itself out? What pitfalls should I
be aware of?

Thanks in advance, Kevin

Anna, many thanks for the advice. It was very straighforward in the
end.

Despite it being hot-swappable I elected to power off the server.
Removed the failed drive and replaced with the new drive. When
rebooting the HP bios detected the change in the array so I took the
option to rebuild the mirror automatically.

The server continued the reboot. With windows up and running I could
use the HP array tool to check on the mirror rebuild process.

Thanks again, Kevin

.



Relevant Pages

  • Re: hardware for Exchange 2003
    ... your current server will work fine. ... in daily bases or weekly bases in order to commit the T.L files into Exchange ... one(or mirror or RAID 1) for Transaction Log files and let's call this D: ... ALL SCSI drives running at 15krpm for maximum throughput. ...
    (microsoft.public.exchange.design)
  • Re: SBS 2000 install problems (need to reinstall from scratch)
    ... They are just simple IDE drives running as dynamic disks ... I am familiar with the Active Directory replication from one server to ... the SBS install will change the AD schema to accomodate Exchange. ... >> Do I need to go into disk management and break the mirror first or just ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: How to debug or explain slow gjournal writes?
    ... get rid of the mirror under the journal, ... It seems like a disk is more likely to misbehave or just be ... On a friend's home server, sometimes when I would setup a multidisk raid (using ... I don't expect to see 3-4 drives run at the same time and get full performance. ...
    (freebsd-stable)
  • Re: Fundamental Disk Mirror Question
    ... > hard drives which are configured as a mirror set. ... > and the server is configured with a single 40GB C: ... > a cloned disk of the complete working system. ...
    (microsoft.public.win2000.general)
  • Worst monday of my life - please help...
    ... I have a customer who had a Windows 2000 Small Business Server running ... but it finally did install with a few hiccups. ... or just leave the mirrored drives in the server on the secondary IDE ... I decided it was time to re-add the mirror. ...
    (microsoft.public.windows.server.sbs)