RE: Monitoring and Reporting Errors

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Robert,
Some of your suggestions, such as changing the default site, will disrupt
my webserver. Also, the default site uses ASP 2 not 1.x, so i beleive that i
need to use a different app pool than default, correct me if i am wrong.

I did make the IP adjustment to add back the 127.0.0.1 IP, but this doesn't
change to original problem

The monitoring will only display the reports, if the default app pool is
using the local system account.


"Robert Li [MSFT]" wrote:

Hi John,

Thanks for updating.

I compared the IIS setting with my test machine and found many difference,
please change the setting as below:

Step 1: Check the Default Web Site settings

1. Open IIS snap-in.
2. Go to Default Web Site
3. Right click default website and select Properties.
4. On the Virtual Directory tab, change the Local Paths to
c:\inteput\wwwroot.
5. Select Application Pool: DefaultAppPool
4. On the Website tab, click advanced button on the left of IP address.
5. Under Multiple indenties for the website, make sure the two host headers
are listed, for example:

IP address Port Host header value
192.168.16.2 80
127.0.0.1 80

Step 2: Check the Monitoring virtual directory setting:

1. Open IIS snap-in.
2. Go to Default Web Site/Monitoring.
3. Right click Monitoring and click Properties.
4. Click Virtual Directory tab.
5. On the Execute permissions item, select Scripts only.

Then please check if the problem can be resolved.

I am looking forward to hear from you.

If you need further assistance, please don't hesitate to let me know.


Best regards,

Robert Li(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================

This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.

=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
<Thread-Topic: Monitoring and Reporting Errors
<thread-index: Acdr0RM+NyIrwzxfQUGMy5baH3Gp7Q==
<X-WBNR-Posting-Host: 207.46.19.168
<From: =?Utf-8?B?Sm9obiBfIFg=?= <JohnX@xxxxxxxxxxxxxxxxxxxxxxxxx>
<References: <281C3092-3867-495C-B4C1-484DE997661C@xxxxxxxxxxxxx>
<ufeXDgsaHHA.2372@xxxxxxxxxxxxxxxxxxxxxx>
<A197B20C-C765-44B2-942D-3FE0FA559171@xxxxxxxxxxxxx>
<A3A3D056-4E2C-48D8-9069-F578DC69948A@xxxxxxxxxxxxx>
<PtezrK4aHHA.296@xxxxxxxxxxxxxxxxxxxxxx>
<Subject: RE: Monitoring and Reporting Errors
<Date: Wed, 21 Mar 2007 08:53:31 -0700
<Lines: 291
<Message-ID: <AE2DF8E1-BE5A-4175-A225-3A069E752F09@xxxxxxxxxxxxx>
<MIME-Version: 1.0
<Content-Type: text/plain;
< charset="Utf-8"
<Content-Transfer-Encoding: 8bit
<X-Newsreader: Microsoft CDO for Windows 2000
<Content-Class: urn:content-classes:message
<Importance: normal
<Priority: normal
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
<Newsgroups: microsoft.public.windows.server.sbs
<Path: TK2MSFTNGHUB02.phx.gbl
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:24323
<NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<
<Thanks Robert, uploaded and called IIS.zip--contains both files you
requested.
<
<
<
<"Robert Li [MSFT]" wrote:
<
<> Hi John,
<>
<> Thanks for updating.
<>
<> I am sorry for the inconvenience to you. I created a workplace to upload
<> file. Please click the following link to upload the file:
<>
<>
https://sftus.one.microsoft.com/choosetransfer.aspx?key=ad89d4e6-7244-4242-9
<> 962-439527252ef0
<>
<> Password: UgISO6)BI
<>
<> I am looking forward to hear from you.
<>
<> Have a nice day.
<>
<> Best regards,
<>
<> Robert Li(MSFT)
<>
<> Microsoft CSS Online Newsgroup Support
<>
<> Get Secure! - www.microsoft.com/security
<>
<> =====================================================
<>
<> This newsgroup only focuses on SBS technical issues. If you have issues
<> regarding other Microsoft products, you'd better post in the
corresponding
<> newsgroups so that they can be resolved in an efficient and timely
manner.
<> You can locate the newsgroup here:
<> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<>
<> When opening a new thread via the web interface, we recommend you check
the
<> "Notify me of replies" box to receive e-mail notifications when there
are
<> any updates in your thread. When responding to posts via your
newsreader,
<> please "Reply to Group" so that others may learn and benefit from your
<> issue.
<>
<> Microsoft engineers can only focus on one issue per thread. Although we
<> provide other information for your reference, we recommend you post
<> different incidents in different threads to keep the thread clean. In
doing
<> so, it will ensure your issues are resolved in a timely manner.
<>
<> For urgent issues, you may want to contact Microsoft CSS directly.
Please
<> check http://support.microsoft.com for regional support phone numbers.
<>
<> Any input or comments in this thread are highly appreciated.
<>
<> =====================================================
<>
<> This posting is provided "AS IS" with no warranties, and confers no
rights.
<>
<> --------------------
<> <Thread-Topic: Monitoring and Reporting Errors
<> <thread-index: AcdrIdmkLBZt9lcORheD/tfh52lhzg==
<> <X-WBNR-Posting-Host: 24.69.165.189
<> <From: =?Utf-8?B?Sm9obiBfIFg=?= <JohnX@xxxxxxxxxxxxxxxxxxxxxxxxx>
<> <References: <281C3092-3867-495C-B4C1-484DE997661C@xxxxxxxxxxxxx>
<> <ufeXDgsaHHA.2372@xxxxxxxxxxxxxxxxxxxxxx>
<> <A197B20C-C765-44B2-942D-3FE0FA559171@xxxxxxxxxxxxx>
<> <Subject: RE: Monitoring and Reporting Errors
<> <Date: Tue, 20 Mar 2007 11:59:13 -0700
<> <Lines: 174
<> <Message-ID: <A3A3D056-4E2C-48D8-9069-F578DC69948A@xxxxxxxxxxxxx>
<> <MIME-Version: 1.0
<> <Content-Type: text/plain;
<> < charset="Utf-8"
<> <Content-Transfer-Encoding: 8bit
<> <X-Newsreader: Microsoft CDO for Windows 2000
<> <Content-Class: urn:content-classes:message
<> <Importance: normal
<> <Priority: normal
<> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
<> <Newsgroups: microsoft.public.windows.server.sbs
<> <Path: TK2MSFTNGHUB02.phx.gbl
<> <Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:24087
<> <NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
<> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <
<> <Hi Robert,
<> <I keep trying to send you the logs but i get an error message back from
<> the
<> <MS smtp servers saying that i am being bounced for sending spam...??
<> <
<> <
<> <
<> < You do not have permission to send to this recipient. For
<> <assistance, contact your system administrator.
<> < <southislandnetworks.com #5.7.1 smtp;550 5.7.1 <Your e-mail
<> was
<> <rejected by an anti-spam content filter on gateway (131.107.115.215).
<> Reasons
<> <for rejection may be: obscene language, graphics, or spam-like
<> <characteristics. Removing these may let the e-mail through the filter.>>
<> <
<> <
<> <do you have any other way to view them
<> <
<> <
<> <
<> <"John _ X" wrote:
<> <
<> <> Thanks for the input Robert,
<> <>
<> <> I do not get any errors when i use the local system account. In fact,
<> <> everything is working as it should be. There are no problems. It is
only
<> as
<> <> network authority that causes all the problems.
<> <>
<> <> I tried your suggestions, but still network auth fails to work. I
will
<> try
<> <> to get the logs and send them to you. ...
<> <>
<> <> "Robert Li [MSFT]" wrote:
<> <>
<> <> > Hi John,
<> <> >
<> <> > Thanks for posting in our newsgroup.
<> <> >
<> <> > From your description, I know that you get error when you view the
<> report
<> <> > from e-mail. If you change the DefaultAppPool to run as Local
Service
<> <> > account, the system works OK. If I am off-base, please don¡¯t
<> hesitate to
<> <> > let me know.
<> <> >
<> <> > Based on my research, the DefaultAppPool runs under Network Service
<> account
<> <> > by default. If you change that to local system account, you will
get
<> Server
<> <> > Application Unavailable error.
<> <> >
<> <> > Please take the following steps to see if the problem can be
resolved:
<> <> >
<> <> > Step 1:Please verify the Monitoring VD settings in IIS server:
<> <> >
<> <> > 1. Open IIS snap-in.
<> <> > 2. Go to Default Web Site/Monitoring.S
<> <> > 3. Right click Monitoring and click Properties.
<> <> > 4. Click Virtual Directory tab.
<> <> > 5. Please ensure you have input proper Local Path
<> (C:\Inetpub\Monitoring)
<> <> > and also ensure the checkbox of Read, Log Visit and Index this
<> resource are
<> <> > checked.
<> <> > And also ensure Application Settings as follows:
<> <> >
<> <> > --Application Name: Monitoring
<> <> > --Execute Permissions: Script only
<> <> > --Application Pool: DefaultAppPool
<> <> >
<> <> > 6. Click Directory Security tab.
<> <> > 7. Click Edit under "Authentication and access control".
<> <> > 8. Make sure that only the option "Integrated Windows
Authentication"
<> <> > checked.
<> <> > 9. Click Edit under "IP address and domain name restriction".
<> <> > 10. Make sure that "Granted access" has been selected.
<> <> > 11. Click Edit under "Secure communications".
<> <> > 12. Make sure that "Require secure channel (SSL)" is UNchecked.
<> <> >
<> <> > 13. Please double-check the default application pool in IIS. To do
so:
<> <> >
<> <> > 1). Open IIS Manager.
<> <> > 2). Go to Server/Application Pools/DefaultAppPool.
<> <> > 3). Right click DefaultAppPool and click Properties.
<> <> > 4). Click the Identity tab.
<> <> > 5). Make sure the application pool is using "Predefined: Network
<> Service"
<> <> > as its identify.
<> <> >
<> <> > 14. Run IISReset command and check whether the problem persists.
<> <> >
<> <> > Step 2: Please change the ASP.NET version to 1.1.4322 on the
<> Monitoring
.

Quantcast