Re: Help and Support fails after SP2

Do a reboot after the Service pack... it should come back fine the second boot.

halsoftware wrote:
Hello GT
Sorry but that was not the issue.
World Wide Web Publishing Service was not the only service that did not start automatically on restart after installing SP2. The following also did not start:
NetLogon
Windows Time
Distributed Transaction Coordinator
Exchange System Attendant
Exchange Information Store
Connector for POP3 Mailboxes
Exchange MTA stacks
SQLAgent#SBSMONITORING

At the console (since Net Logon was not started) started Net Logon and Windows Time. Then remoted into server and started the other failed to start services.
"Help and Support" was NOT LISTED in the Services and therefore could not be started.

The solution was as stated in my previous post. I hope this is clearer and others who might have the same problem should try the solutions stated by others in this posting.
Thanks,
Hal

"GT" wrote:

WWW Publisher Services appears to get disabled by SP2 this stops ISA admin service from running and the help and support needs this to run.

Look at your services and make sure these are running.

Regards,

GT
"halsoftware" <halsoftware@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:F3BB6C2C-2231-4DD0-B9FA-8BE9ABC8608E@xxxxxxxxxxxxxxxx
Happy to report the following finally worked.
Start /w helpsvc /svchost netsvcs /regserver /install

It worked after reinstalling SP2 on top of SP2 without first uninstalling SP2

Thanks for the help.
Hal



"halsoftware" wrote:

None of the above worked. Help and Support is still not listed in services.
Any more suggestions?
I think Microsoft needs to step in on this one.
Hal

"neo [mvp outlook]" wrote:

If none of the suggestions do not work, uninstall/reinstall SP2.


"SBSNovice" <SBSNovice@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:47DA2BDC-DD59-4F83-832E-226CADC835BF@xxxxxxxxxxxxxxxx
Thanks for the info. The same thing happened on my box (SBS 2003 Premium
SP2). I'll post if there is a problem with the fix.

"GoodwinM" wrote:

This solution was posted with the original thread and appears to still
apply.
Hope this will save someone else having to look.

Suggestion 1 worked to resolve my issue:

Suggestion 1. Reinstall Help and Support service.

1. From a command prompt go to the "C:\Windows\pchealth\helpctr\binaries"
folder by typing:

CD \windows\pchealth\helpctr\binaries

2. Run the following commands one by one:

Start /w helpsvc /svchost netsvcs /regserver /install
net start helpsvc

=========================

Suggestion 2. Reinstall Help and Support.

1. Open Windows Explorer.

2. Go to C:\Windows\inf folder.

3. Right click pchealth.inf and click Install.

4. If the system prompts for installation CD, please insert installation
CD
1.

5. If the system prompts for SP1 installation CD, you have to manually
create a slipstream installation CD 1.

Universal Windows Slipstreaming and Bootable CD Guide
http://www.msfn.org/articles.php?action=show&showarticle=49

==========================

Suggestion 3. Use SFC to check system protected files.

If the problem persists, please use SFC command to check whether there's
any corrupted system protected file.

1. Click Start and click Run.

2. Key in "SFC /scannot", then click OK.

3. The system will automatically scan the protected files.

4. Wait for the wizard to complete.

You may also need to insert the slipstream installation CD 1.

===========================


"GoodwinM" wrote:

This was posted a year or so ago so I thought I would start a new
thread for
SP2 in case anyone else is also having the issue -

After installing SBS 2003 SP2 if I select Help and Support the
following
error message dialog is displayed.

"Windows cannot open Help and SUpport because a system service is not
running. To fix this problem, start the service named 'Help and
Support'"

However, I can't find such a service listed in the Services list.

Any ideas?


.

Relevant Pages

  • Re: Microsoft Fax Services
    ... Many users who have updated an older version of Windows XP to SP2 before ... installation routine states it cannot find the necessary files). ... [MVP-Outlook] ... Some, now cured, problems were definitely pre SP2. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: SP2 Really Necessary??
    ... "No offense but 450 pages of 20 error question on each" ... Nothing can guarantee a successful installation of SP-2, ... get rid of SP2. ... >> for Windows XP and updates about 5 million lines of code, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: The TCP... settings block my port scanners(kazaa,warez,etc)
    ... Microsoft offers free tech support for virus ... ICF / Windows firewall installed by XP SP2... ... i thought that the installation was ...
    (microsoft.public.security)
  • Re: no boot !!!! xp sp2 auto update install
    ... Windows XP SP1 up and working working and having the latest drivers are not ... SP2 - whether or not you are doing one computer or thousands. ... installation finished ok, or so it said... ... the mode is on to pleasuse the rebooting gods ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: Microsoft Fax Services
    ... Thanks to Russ Valentine for suggesting to look into Control Panel> Admin ... installation routine states it cannot find the necessary files). ... Printer Driver Microsoft Shared Fax Driver for Windows NT x86 ... Some, now cured, problems were definitely pre SP2. ...
    (microsoft.public.windowsxp.print_fax)
Loading