TrixBox and SBS dhcp prob

I'm seeking advice on the correct setting for DHCP reserved addresses
and scope for SBS2003. we are having some intermittant phone dropouts
on a TrixBox Linux system on the same network, and think that maybe it
is associated with DHCP.

Currently DHCP setup is pretty standard (I think):
address pool 192.168.0.50 to 130
no reservations
scope: router 192.168.0.2
dns server 192.168.0.2
domainname domainname.local
wins/nbns servers 192.168.0.2

with no additional server options.

I have seen in other posts that it can be recommended to reserve
certain IP addresses. Should I be doing this?

I have one unresolved error message happening
Event Type: Warning
Event Source: DhcpServer
Event Category: None
Event ID: 1056
Date: 15/03/2007
Time: 12:18:43 AM
User: N/A
Description:
The DHCP service has detected that it is running on a DC and has no
credentials configured for use with Dynamic DNS registrations
initiated by the DHCP service. This is not a recommended security
configuration. Credentials for Dynamic DNS registrations may be
configured using the command line "netsh dhcp server set
dnscredentials" or via the DHCP Administrative tool.

which I will address in the next couple of days.

Other than the current Trixbox issues there are no other problems.

any advice appreciated

Penny

.

Relevant Pages

  • Re: Error DHCP Windows 2008 R2, DHCP client is not a reserved clie
    ... We splitted to scope-range as we have two DHCP servers. ... Reservations are done on both servers. ... So at one DHCP server the Reservations is outside the range but inside the ... So it appears the reservation was outside of the scope, ...
    (microsoft.public.win2000.networking)
  • RE: Print Distribution and IP connected Devices
    ... DHCP can be configured with RESERVATIONS to consistently assign the same ... DNS server, ...
    (bit.listserv.ibm-main)
  • Re: How do I enable dynamic ip address release?
    ... Did you use the wizardfrom SBS to configure the DHCP server or did it by hand? ... Are the clients behind a rotuer? ... pool and how many reservations do you have? ...
    (microsoft.public.windows.server.networking)
  • Re: DNS server setup questions
    ... and a simple file server. ... or by using RESERVATIONS on the DHCP server. ... On my DHCP settings I just set a scope that I wanted my workstations to ...
    (microsoft.public.windows.server.dns)
  • Re: Changing corporate network addressing
    ... my DHCP server for the gateway address and then be done. ... If machines require having the same address all the time then your ... are either recreating Reservations or manually reconfiguring the TCP/IP ...
    (microsoft.public.windows.server.networking)