RE: "Delayed Write Failed" error message when you write a file to
- From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
- Date: Thu, 01 Mar 2007 02:22:37 GMT
Hi Michael,
Thanks for updating.
Since the problem happed just once, it may be caused by random accidents
such as temporally bad network traffic. Please try to run that program when
you are convenient, when it works fine, please just take it easy.
If the problem still exists, please check the following as I suggested in
my previous post:
1. Make a clean boot. The problem may be caused by some software on the
workstation.
2. Check the network.
3. Apply the hotfix KB 818408.
Based on current situation, please don't take the step 4, because only one
client has problem.
The problem may also be caused by your archiving process, please also
contact the software manufacture. Thanks for your understanding.
If you need further assistance, please don't hesitate to let me know.
Best regards,
Robert Li(MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
<Thread-Topic: "Delayed Write Failed" error message when you write a file to
<thread-index: AcdbP8z/C9QkYSQLSlGnAb5X9+2/bA==
<X-WBNR-Posting-Host: 74.92.4.169
<From: =?Utf-8?B?Y29vcGZhYg==?= <coopfab@xxxxxxxxxxxxxxxxxxxxxxxxx>
<References: <1B51A8ED-3295-4730-880F-A66E7E60972D@xxxxxxxxxxxxx>
<0prxL9vWHHA.2208@xxxxxxxxxxxxxxxxxxxxxx>
<Subject: RE: "Delayed Write Failed" error message when you write a file to
<Date: Wed, 28 Feb 2007 05:53:18 -0800
<Lines: 198
<Message-ID: <CFD6F130-8372-43BA-9688-97BA2C59D087@xxxxxxxxxxxxx>
<MIME-Version: 1.0
<Content-Type: text/plain;
< charset="Utf-8"
<Content-Transfer-Encoding: 8bit
<X-Newsreader: Microsoft CDO for Windows 2000
<Content-Class: urn:content-classes:message
<Importance: normal
<Priority: normal
<X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
<Newsgroups: microsoft.public.windows.server.sbs
<Path: TK2MSFTNGHUB02.phx.gbl
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:20065
<NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<
<Good morning. Thank you very much for putting so much effort into my
<situation, we're most appreciative.
<
<We have a small network and the incident has happened just once. It
involves
<our order entry and inventory management program during a process which is
<run maybe twice a year. The exe files for the program reside on the
<workstations and the data files are on our (single) server which has only
one
<hard drive.
<
<The error message appeared when I was archiving old records from 3 files.
<The archiving process is "automatic" and the files holding the archived
<records reside in the same folder on the fixed hard drive as the other
<database records.
<
<Which of your steps would you suggest I try first? I can only run the
<archiving process after hours so I wonâ??t have results of your
suggestions
<till later on this evening.
<
<Again, thanks for your interest and if I havenâ??t given you enough
<information or havenâ??t answered your questions thoroughly please let me
know.
<
<Michael
<
<
<--
<M. Cooper
<
<
<"Robert Li [MSFT]" wrote:
<
<> Hi,
<>
<> Thanks for posting in our newsgroup.
<>
<> From your description, I know that you receive "Delayed Write Failed"
error
<> message when you write a large file to a server. If I am off-base,
please
<> don't hesitate to let me know.
<>
<> Please let me know the following to make the situation more clearly:
<>
<> 1. When copying a same file, do all the users or some of them have the
<> problem?
<> 2. Where do you copy file, to a shared folder, a website or others?
<> 3. What's the topology of your network?
<> 4. Where is the share folder locating? Is that a USB disk?
<>
<> I read the KB 321733, this problem occurs because the client redirector
<> does not calculate the SMB signature properly. The problem was corrected
in
<> Windows XP Service Pack 2. I also searched the Microsoft website, there
are
<> many KBs related to "Delayed Write Failed", but they are already
included
<> in Windows XP SP2. Since you have already installed Windows XP SP2, I'd
<> like to give you other suggestion.
<>
<> Step 1: Please make a clean boot, the problem may be caused by some
third
<> party software on the Windows XP.
<>
<> 1. Click Start->Run...->type msconfig and press Enter.
<> 2. Click Services tab and select Hide All Microsoft Services and Disable
<> All third party Services.
<> 3. Click Startup tab and Disable All startup items.
<> 4. Click OK and choose Restart.
<> 5. After reboot, check whether the problem still occurs.
<> 6. If there are no more problems, please use the above steps to enable
<> services and startup items one by one in order to figure out the root
cause
<> of this issue.
<>
<> Step 2: The problem may be caused network hardware problems, please try
<> changing the network speed on the NICs. You may configure all the
network
<> devices (NICs, routers, switches) to a hard-coded setting of 100Mbps/s,
<> rather than the default in Windows of "automatic". Note that not only
the
<> NICs have to be set, but verify the switches and routers are also
<> configured for this setting. Please also try to connect the client
<> workstation directly to the Server and then copy a big file, will the
same
<> issue reoccur?
<>
<> Step 3: This problem occurs because, during a WebDAV connection, the
<> WinInet function does not break up the data into sufficiently small
chunks.
<> As a result, the system cannot allocate a sufficiently large block of
<> kernel pool memory, and therefore the file-copy operation is
unsuccessful.
<>
<> To resolve the problem, you need to install hotfix on the SBS server.
<> Please contact CSS for the hotfix KB 818408.
<>
<> For more information, please refer to:
<> "Windows - Delayed Write" error message and Event ID 14800 when you try
to
<> copy a large file to a Web folder by using WebDAV
<> http://support.microsoft.com/kb/818408/
<>
<> Step 4: If all users have this problem, this behavior occurs when server
<> message block (SMB) signing is enabled and required on the domain
<> controller that is running Windows Server 2003. Please take the steps to
<> disable the SMB signing on the server:
<>
<> 1. Start-->Run-->Type ''''regedit'''' and press Enter.
<> 2. Navigate to the following registry:
<>
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\lanmanserver\Parameters
<> 3. In the right panel, double-click ''''enablesecuritysignature''''. Set
<> the value data to ''''0''''
<> 4. Navigate to the following registry:
<>
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanworkstation\Param
<> eters\
<> 5. In the right panel, double-click ''''enablesecuritysignature''''. Set
<> the value data to ''''0''''
<> 6. Open a command prompt, type ''''gpupdate /force'''' and press Enter.
<>
<> If this issue still exists, please help me to collect the MPS Report, so
<> that I can perform further research on this particular issue. To
collect
<> the MPS Report, please refer to the following steps:
<>
<> 1. Download MPSReport tool from below URL:
<>
<http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd
<> 915706/MPSRPT_SETUPPerf.EXE>
<> 2. Execute the tool on the computer.
<> 3. Please send the result file (CAB file) to me at
v-robeli@xxxxxxxxxxxxx
<> with subject: 38096027- "Delayed Write Failed" error message when you
write
<> a file to a server.
<>
<> If you need further assistance, please don't hesitate to let me know.
<>
<> Best regards,
<>
<> Robert Li(MSFT)
<>
<> Microsoft CSS Online Newsgroup Support
<>
<> Get Secure! - www.microsoft.com/security
<>
<> =====================================================
<>
<> This newsgroup only focuses on SBS technical issues. If you have issues
<> regarding other Microsoft products, you'd better post in the
corresponding
<> newsgroups so that they can be resolved in an efficient and timely
manner.
<> You can locate the newsgroup here:
<> http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<>
<> When opening a new thread via the web interface, we recommend you check
the
<> "Notify me of replies" box to receive e-mail notifications when there
are
<> any updates in your thread. When responding to posts via your
newsreader,
<> please "Reply to Group" so that others may learn and benefit from your
<> issue.
<>
<> Microsoft engineers can only focus on one issue per thread. Although we
<> provide other information for your reference, we recommend you post
<> different incidents in different threads to keep the thread clean. In
doing
<> so, it will ensure your issues are resolved in a timely manner.
<>
<> For urgent issues, you may want to contact Microsoft CSS directly.
Please
<> check http://support.microsoft.com for regional support phone numbers.
<>
<> Any input or comments in this thread are highly appreciated.
<>
<> =====================================================
<>
<> This posting is provided "AS IS" with no warranties, and confers no
rights.
<>
<> --------------------
<> <Thread-Topic: "Delayed Write Failed" error message when you write a
file
<> to a se
<> <thread-index: AcdaxLDa4HnCewWHSa6VsQld4ugreQ==
<> <X-WBNR-Posting-Host: 74.92.4.169
<> <From: =?Utf-8?B?Y29vcGZhYg==?= <coopfab@xxxxxxxxxxxxxxxxxxxxxxxxx>
<> <Subject: "Delayed Write Failed" error message when you write a file to
a se
<> <Date: Tue, 27 Feb 2007 15:12:03 -0800
<> <Lines: 13
<> <Message-ID: <1B51A8ED-3295-4730-880F-A66E7E60972D@xxxxxxxxxxxxx>
<> <MIME-Version: 1.0
<> <Content-Type: text/plain;
<> < charset="Utf-8"
<> <Content-Transfer-Encoding: 7bit
<> <X-Newsreader: Microsoft CDO for Windows 2000
<> <Content-Class: urn:content-classes:message
<> <Importance: normal
<> <Priority: normal
<> <X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
<> <Newsgroups: microsoft.public.windows.server.sbs
<> <Path: TK2MSFTNGHUB02.phx.gbl
<> <Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:19977
<> <NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
<> <X-Tomcat-NG: microsoft.public.windows.server.sbs
<> <
<> <RE: article ID: 321733
<> <
<> <We're running XP SP2 workstations and got this error message writing a
lot
<> <of data to a database file on the server.
<> <
<> <The article instructs you to look in the event log. Can't find the
event
<> log.
<> <The hotfix for this error was to have been fixed in SP2, which we're
<> running.
<> <
<> <Have you come across this situation. Is there a fix?
<> <
<> <Thanks in advance.
<> <--
<> <M. Cooper
<> <
<>
<>
<
.
- Prev by Date: Re: Backup finished with some errors
- Next by Date: Starting a pc in safe mode remotely
- Previous by thread: Re: Backup finished with some errors
- Next by thread: Re: "Delayed Write Failed" error message when you write a file to
- Index(es):
Relevant Pages
|
