RE: Error Code: 8: 0x80004005
- From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
- Date: Tue, 27 Feb 2007 11:45:07 GMT
Hi Info,
Thanks for posting in our newsgroup.
Please let me know the following to make the situation more clearly:
1. I searched the Microsoft website but couldn¡¯t find Error Code: 8:
0x80004005. I guess that error code was 0x80004005, am I right?
2. Do all the clients or some of them have this problem?
Please take the following steps to narrow down this issue:
Step 1: Please boot into safe mode and then check the clean boot mode, the
problem may be caused by some third party software:
1. Boot into Safemode by hitting F8 during boot up.
2. Enter into Windows in same mode click Start | Run and type "msconfig"
(no quotes) and press enter.
3. Click services from the tab, check the check box of Hide All Microsoft
Service, and then click Disable all
4. Click startup from the tab, then click Disable all
5. Click "OK" and follow the instructions to Restart Computer, after
rebooting if you get a prompt dialog of System Configuration, please check
the check box in the dialog and click "OK".
Step 2: Please boot into Safe Mode and then restore the system to a time
before the changes are made..
1. Boot into Safemode by hitting F8 during boot up.
2. Go to the Start menu, Select All Programs-> Accessories System Tools->
System Restore.
3. Following the instructions to restore the system to a time before any
recent changes were made. Then please check the issue again.
For more information, please refer to:
Using System Restore
http://www.microsoft.com/windowsxp/using/setup/support/sysrestore.mspx
Step 3: This problem may occur if a file that the Windows Product
Activation (WPA) requires is damaged or missing.
To resolve the problem, repair the installation of Windows XP by using the
Windows XP CD, and then replace the files. To do this, follow these steps:
1. Insert the Windows XP CD in the CD drive or in the DVD drive.
2. Restart your computer.
3. When you receive the following message, press a key to start your
computer from the Windows XP CD:
Press any key to start from CD
Note Your computer must be configured to start from the CD drive or from
the DVD drive. For more information about how to configure your computer to
start from the CD drive or from the DVD drive, see the documentation that
came with your personal computer. Alternatively, contact the manufacturer.
4. When you receive the following message, press R to start the Recovery
Console. This part of the Setup program prepares Windows XP to run on your
computer.To set up Windows XP now, press ENTER.
To repair a Windows XP installation by using Recovery Console, press R.
To exit Setup without installing Windows XP, press F3.
5. Press 1 to access your primary drive installation by using the Recovery
Console.
6. When you are prompted, type the administrator password. If you do not
have an administrator password, press ENTER.
7. Type cd %SystemRoot%\System32, and then press ENTER.
8. Rename the following files by using the REN command. To do this, type
REN File_Name.extensionFile_Name.old at the command prompt. ? Wpa.dbl
? Pidgen.dll
? Actshell.html
? Licdll.dll
? Regwizc.dll
? Licwmi.dll
? Wpabaln.exe
Note In the previous command, File_Name.extension represents the new file
name. Additionally, File_Name.old represents the old file name.
9. Type the drive letter of the CD drive together with a colon, and then
press ENTER. For example, you type D:, and then press ENTER.
10. Type cd i386, and then press ENTER.
11. Type the following commands individually. Press ENTER after each
command. ? Expand licwmi.dl_%Systemroot%\System32
? Expand regwizc.dl_%Systemroot%\System32
? Expand licdll.dl_%Systemroot%\System32
? Expand wpabaln.ex_%Systemroot%\System32
? Expand wpa.db_%Systemroot%\System32
? Expand actshell.ht_%Systemroot%\System32
? Copy pidgen.dll%Systemroot%\System32
12. Type Exit, and then press ENTER to restart the computer.
For more information, please refer to:
You may receive error code 0x80004005 or other error codes when you try to
start a Windows XP-based computer
http://support.microsoft.com/kb/914232
If the problem still exists, please send me MPS Report for further research.
1) Download MPS report tool from:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd9
15706/MPSRPT_SETUPPerf.EXE
2) Run the MPSRPT_SETUPPerf.exe on the server box.
3) Wait for 10~15 minutes.
4) Open Windows explorer, navigate to
%SYSTEMROOT%\MPSReports\Setup\Reports\cab\
5) Send the .cab file to v-robeli@xxxxxxxxxxxxx with subject:
38047804-Error Code: 8: 0x80004005.
If you need further assistance, please don¡¯t hesitate to let me know.
Best regards,
Robert Li(MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.
Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.
For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.
Any input or comments in this thread are highly appreciated.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
<X-Tomcat-ID: 111220857
<References: <1172340230.837136.318190@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
<MIME-Version: 1.0
<Content-Type: text/plain
<Content-Transfer-Encoding: 7bit
<From: v-robeli@xxxxxxxxxxxxxxxxxxxx (Robert Li [MSFT])
<Organization: Microsoft
<Date: Mon, 26 Feb 2007 06:34:28 GMT
<Subject: RE: Error Code: 8: 0x80004005
<X-Tomcat-NG: microsoft.public.windows.server.sbs
<Message-ID: <zkp3sAXWHHA.2208@xxxxxxxxxxxxxxxxxxxxxx>
<Newsgroups: microsoft.public.windows.server.sbs
<Lines: 98
<Path: TK2MSFTNGHUB02.phx.gbl
<Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:19580
<NNTP-Posting-Host: tomcatimport2.phx.gbl 10.201.218.182
<
<Hi Info,
<
<Thanks for posting in our newsgroup.
<
<From your description, I know that you get Error Code: 0:80004005 when you
<try to log on SBS 2003 server. If I am off-base, please don't hesitate to
<let me know.
<
<I am sorry that you are using Swedish edition product, please open a post
<in local newsgroup. Thanks for understanding.
<
<I'd like to provide additional information:
<
<Using System Restore
<http://www.microsoft.com/windowsxp/using/setup/support/sysrestore.mspx
<
<You may receive error code 0x80004005 or other error codes when you try to
<start a Windows XP-based computer
<http://support.microsoft.com/kb/914232
<
<If you need further assistance, please don't hesitate to let me know.
<
<
<Best regards,
<
<Robert Li(MSFT)
<
<Microsoft CSS Online Newsgroup Support
<
<Get Secure! - www.microsoft.com/security
<
<=====================================================
<
<This newsgroup only focuses on SBS technical issues. If you have issues
<regarding other Microsoft products, you'd better post in the corresponding
<newsgroups so that they can be resolved in an efficient and timely manner.
<You can locate the newsgroup here:
<http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
<
<When opening a new thread via the web interface, we recommend you check
the
<"Notify me of replies" box to receive e-mail notifications when there are
<any updates in your thread. When responding to posts via your newsreader,
<please "Reply to Group" so that others may learn and benefit from your
<issue.
<
<Microsoft engineers can only focus on one issue per thread. Although we
<provide other information for your reference, we recommend you post
<different incidents in different threads to keep the thread clean. In
doing
<so, it will ensure your issues are resolved in a timely manner.
<
<For urgent issues, you may want to contact Microsoft CSS directly. Please
<check http://support.microsoft.com for regional support phone numbers.
<
<Any input or comments in this thread are highly appreciated.
<
<=====================================================
<
<This posting is provided "AS IS" with no warranties, and confers no rights.
<
<--------------------
<<From: info@xxxxxxxxxxxxxxxxx
<<Newsgroups: microsoft.public.windows.server.sbs
<<Subject: Error Code: 8: 0x80004005
<<Date: 24 Feb 2007 10:03:50 -0800
<<Organization: http://groups.google.com
<<Lines: 12
<<Message-ID: <1172340230.837136.318190@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
<<NNTP-Posting-Host: 213.113.102.237
<<Mime-Version: 1.0
<<Content-Type: text/plain; charset="iso-8859-1"
<<Content-Transfer-Encoding: quoted-printable
<<X-Trace: posting.google.com 1172340245 31162 127.0.0.1 (24 Feb 2007
<18:04:05 GMT)
<<X-Complaints-To: groups-abuse@xxxxxxxxxx
<<NNTP-Posting-Date: Sat, 24 Feb 2007 18:04:05 +0000 (UTC)
<<User-Agent: G2/1.0
<<X-HTTP-UserAgent: Mozilla/5.0 (Windows; U; Windows NT 5.1; sv-SE;
<rv:1.7.8) Gecko/20050511 Firefox/1.0.4,gzip(gfe),gzip(gfe)
<<Complaints-To: groups-abuse@xxxxxxxxxx
<<Injection-Info: z35g2000cwz.googlegroups.com;
posting-host=213.113.102.237;
<< posting-account=fDNzeA0AAACGEhdFkP5_au752MaFE5YR
<<Path:
<TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS01.phx.gbl!newsfeed
.
- References:
- Error Code: 8: 0x80004005
- From: info
- RE: Error Code: 8: 0x80004005
- From: Robert Li [MSFT]
- Error Code: 8: 0x80004005
- Prev by Date: Re: additional Sharepoint site for Extranet
- Next by Date: Re: Performance Reports on 2003 R2
- Previous by thread: RE: Error Code: 8: 0x80004005
- Next by thread: Re: SBS 2003 Alert Error?
- Index(es):
Relevant Pages
|
Loading
