Re: RDC over RWW The client could not connect

Tech-Archive recommends: Speed Up your PC by fixing your registry

In news:1169469924.158419.12760@xxxxxxxxxxxxxxxxxxxxxxxxxxx,
Mat <coyoteservices@xxxxxxxxx> typed:
I have a SBS 2003 Standard installation. setup with 2 network cards

1 card to internet
1 card to internal LAN

Remote desktop works from the server to the client PC, using both the
computer name and the IP address.

When I connect to remote Web Workplace (Externally) and click on the
connect to my computer at work. I get the following. "The client
could not connect to the remote computer. Remote connections might
not be enabled or the computer may be to busy to accept new
connections." etc.

I have enabled Terminal Services, e-mail and VPN in the firewall
setting on the server.

Not related - unless you need to use TS to get directly to the server, you
don't need 3389. Re mail, I presume you mean SMTP (25) - also not related.
VPN - same thing. However, do you have 443 *and* TCP 4125 open/forwarded?


Any help appreciated.



.

Relevant Pages

  • [Full-Disclosure] R: Full-Disclosure Digest, Vol 3, Issue 42
    ... Full-Disclosure Digest, Vol 3, Issue 42 ... SD Server 4.0.70 Directory Traversal Bug ... Arkeia Network Backup Client Remote Access ...
    (Full-Disclosure)
  • RE: Remote connectivity problems
    ... do you mean you have added a remote client to SBS ... If you have hardware VPN tunnel setup using Linksys or others, ... In this scenario you have to configure the SBS Server computer to enable ...
    (microsoft.public.windows.server.sbs)
  • Re: Terminal Services Remote Control
    ... You don't need the Remote Desktop Client on the server, ... how do I get Remote Control ...
    (microsoft.public.win2000.termserv.apps)
  • Re: RWW Disconnecting
    ... I have been connected from a remote site for about 3 ... DHCP server and even a wireless access ... the key codes to for Internet access. ... Client Workstations} ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW Disconnecting
    ... Server to test the issue. ... I understand that remote client encounts following error message when RWW ... I strongly suggest that we rerun the Configure E-mail and Internet ...
    (microsoft.public.windows.server.sbs)