RE: Private settings on my laptop

I've gone through all of these steps (AND lots more in subsequent emails) but
am still getting the same "can not migrate profile because user settings are
marked private" message. NOTHING is marked private. Not in this user or in
the administrator or ANYWHERE!!!!!!!!

So... how do I manually move the user settings over (including all of my
outlook files, folders, messages, contacts, calendar ETC)?

I'm SO incredibly frustrated!

"Terence Liu [MSFT]" wrote:

Thank you for your posting.

According to your post, I understand that you cannot copy profile to domain
user profile. If I am off-base on that, please let me know.

Method 1:
First of all, I suggest you disjoin the client workstation from the domain
and then use connect computer wizard to join the domain again to migrate
the profile.

Also you can use steps provided in the following Kb to copy the old profile
for the new user:

How to copy data from a corrupted user profile to a new profile
http://support.microsoft.com/?id=811151

Method 2:
NOTE: Before following these steps, confirm that the "Make this folder
private" check box is cleared for the user who you are trying to migrate.

Based on my research, this issue may occur if you do not have permissions
to access some of the files that are located in Documents and
Settings\UserName folder that corresponds to the user who you are trying to
migrate. I suggest that we clear the temporary internet files, perform a
clean boot on the problematic client workstation and then test the issue
again. To do so:

To clear the temporary internet files:

1. On the problematic client workstation, open IE -> Tools ->
Internet Options -> General tab.
2. Click Delete Files button.
3. Tick the box "Delete all offline content" and click OK.
4. Click OK.

To perform clean boot:

a. Click Start->Run, type "MSCONFIG" (without the quotation marks) and
click OK.
b. In the System Configuration Utility (MSConfig) window, click the
"Startup" tab.
c. Click to clear all the check marks from the list box under "Startup".
d. Click the Services tab, check the "Hide all Microsoft Services" box and
then click the "Disable All" button to disable the non-Microsoft services.
e. Click OK to close the MSConfig window. Click Yes when you are asked to
restart your computer in order to enable the changes.
f. After restarting, please check whether this issue still exists.

Disabled simple file sharing and set permission on folder to everyone
a. Open Explorer, click Tools->Folder Options, click View tap, ensure do
not tick Use simple file sharing (Rcommended)
b. Right-click Documents and Settings\UserName folder select properties,
click Security tap
c. Add Everyone in user list, tick Modify permission for Everyone, click OK
to finish.

Additional, you have mentioned Files and Settings Transfer Wizard, there is
a KB you can follow:

How to use Files and Settings Transfer Wizard in Windows XP
http://support.microsoft.com/?id=293118

If the issue still exists, please provide me with the following log files:

1. When the error message occurs, press PrScrn key, paste in MSPAINT
application, save the screen shot file and email to me.
2. Email me with the C:\Program Files\Microsoft Windows Small Business
Server\Clients\SBSNetSetup.log file from the affected client computer.

You can send the files to me at v-terliu@xxxxxxxxxxxxxx

Have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| Thread-Topic: Private settings on my laptop
| thread-index: Acckd/9ewt+KeDBuTxq+YdQLjJIU6A==
| X-WBNR-Posting-Host: 69.95.179.44
| From: =?Utf-8?B?Q2hlcnlsRGV0cmljaw==?=
<CherylDetrick@xxxxxxxxxxxxxxxxxxxxxxxxx>
| Subject: Private settings on my laptop
| Date: Wed, 20 Dec 2006 12:47:00 -0800
| Lines: 27
| Message-ID: <5A1487FB-5574-4EC0-94E0-C56BE5AE7688@xxxxxxxxxxxxx>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
| Newsgroups: microsoft.public.windows.server.sbs
| Path: TK2MSFTNGHUB02.phx.gbl
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:5693
| NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| We just set up SBS 2003 R1 as our server and added users & computers.
|
| One workstation is added and working fine internally (remotely is a
| different story and the subject of a separate question!).
|
| Mine however, is not. I stupidly did not migrate my profile over when I
| connected the computer to the server (one too many multi-tasking
processes
| going on at once!) but I'm trying to fix that.
|
| Here's my problem!
|
| I completed the transfer files & settings wizard and saved the file in
"My
| Documents"; I told the server redirect all "my documents" to the server;
but
| when I try to migrate my files over to the server and to access my
transfer
| files & settings wizard I get a message that the files are private.
|
| I have tried following all the instructions (including the 886210
| suggestion) to make my files, folder, profiles, documents & settings,
| EVERYTHING NOT private on my laptop but all to no avail.
|
| I'm pretty frustrated and decided to call out for help.
|
| HELP!
|
| Thanks
|
|
|


.