RE: TCP/IP Services Application encountered a problem and needed to close.



Hello Chris,

Thank you for posting here.

According to your description, I understand that you get error "TCP/IP
Services Application encountered a problem and needed to close" on your SBS
server. If I have misunderstood the problem, please don't hesitate to let
me know.

Based on my research, maybe the TCP/IP stack in your SBS server is
corrupted. I suggest we try the following steps to see if we can resolve
this issue:

1. I suggest you use netsh int ip reset command to reset the TCP/IP stack:

Warning: The netsh int ip reset command will reset all IP information,
default gateway information, and DNS server information. Before you restart
the computer after you run this command, you must configure your TCP/IP
settings. Otherwise, you may not be able to connect to the computer
remotely.

Note: I suggest you to backup the server first in order to avoid server
crash.

a. Click Start, and then click Run.

b. In the Open box, type cmd, and then click OK.

c. At the command prompt, type the following command, and then press ENTER:

netsh int ip reset resetlog.txt

NOTE: In the preceding command, "int" is the shortened form of the
interface command.

d. Type exit, and then press ENTER.

e. Restart the SBS, then test this issue.

For more info:

How to reset "Internet Protocol (TCP/IP)" in Windows Server 2003
http://support.microsoft.com/kb/317518/en-us

After resetting the TCP/IP stack, we need to restart SBS server and rerun
the CEICW Wizard.

If this issue persists, please go to step 2:

2. Reinstall TCP/IP on SBS via the following KB page:

How to remove and reinstall TCP/IP on a Windows Server 2003 domain
controller
http://support.microsoft.com/kb/325356/en-us

Note: I suggest you to backup the server first in order to avoid server
crash.

If the issue persists, please kindly help me collect some information for
further investigation:

1. When you get this error? Please capture a screenshot on the error and
send the picture to me at v-terliu@xxxxxxxxxxxxx

2. What is the edition of your SBS?

3. Save the application event log and system event log as evt files on the
problematic machines and send to my mailbox: v-terliu@xxxxxxxxxxxxx

Hope these steps will give you some help.

Thanks and have a nice day!

Best regards,

Terence Liu(MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
This newsgroup only focuses on SBS technical issues. If you have issues
regarding other Microsoft products, you'd better post in the corresponding
newsgroups so that they can be resolved in an efficient and timely manner.
You can locate the newsgroup here:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

When opening a new thread via the web interface, we recommend you check the
"Notify me of replies" box to receive e-mail notifications when there are
any updates in your thread. When responding to posts via your newsreader,
please "Reply to Group" so that others may learn and benefit from your
issue.

Microsoft engineers can only focus on one issue per thread. Although we
provide other information for your reference, we recommend you post
different incidents in different threads to keep the thread clean. In doing
so, it will ensure your issues are resolved in a timely manner.

For urgent issues, you may want to contact Microsoft CSS directly. Please
check http://support.microsoft.com for regional support phone numbers.

Any input or comments in this thread are highly appreciated.
=====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.

--------------------
| From: "Chris....." <beeboo_beeboo@xxxxxxxxxxx>
| Newsgroups: microsoft.public.windows.server.sbs
| Subject: TCP/IP Services Application encountered a problem and needed to
close.
| Date: Sat, 23 Dec 2006 00:41:32 +0800
| Organization: Netfront Broadband http://www.netfront.net/
| Lines: 7
| Message-ID: <emh1rt$tof$1@xxxxxxxxxxxxxxxxxxxx>
| NNTP-Posting-Host: 251-224.netfront.net
| X-Trace: adenine.netfront.net 1166805693 30479 202.81.251.224 (22 Dec
2006 16:41:33 GMT)
| X-Complaints-To: news@xxxxxxxxxxxx
| NNTP-Posting-Date: Fri, 22 Dec 2006 16:41:33 +0000 (UTC)
| X-Priority: 3
| X-MSMail-Priority: Normal
| X-Newsreader: Microsoft Outlook Express 6.00.2900.3028
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.3028
| X-RFC2646: Format=Flowed; Original
| Path:
TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTFEEDS02.phx.gbl!TK2MSFTFE
EDS01.phx.gbl!newsfeed00.sul.t-online.de!t-online.de!news.glorb.com!news.net
front.net!not-for-mail
| Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.windows.server.sbs:6152
| X-Tomcat-NG: microsoft.public.windows.server.sbs
|
| can anyway help me to understand this message... i have no ideas....
|
| please help and explain... thanks...
|
| Chris.....
|
|
|

.



Relevant Pages

  • RE: Error in RRAS setup
    ... Thank you for posting to the SBS Newsgroup. ... you newly upgraded your SBS 2K server to SBS 2K3 ... Your issue is the Routing and Remote Access becomes unresponsive, ... Make sure correctly running the following commands from the command ...
    (microsoft.public.windows.server.sbs)
  • Re: Time Synchronization
    ... followed the instructions in Article 875424 and run the following command on ... > Thanks for using the SBS newsgroup! ... > synchronizing time between the SBS server and client computers. ...
    (microsoft.public.windows.server.sbs)
  • Re: How to change the default config away from using proxy
    ... Post the install.ins from the server. ... the command in the article. ... Here is the section from a non-ISA SBS 2003 ... I missed the command/apps you suggested I run on the workstation, ...
    (microsoft.public.windows.server.sbs)
  • RE: service stops for no reason.
    ... Thank you for posting in the SBS newsgroup. ... The DNS server could not signal the service "NAT". ... At a command prompt, type the following command, and then press ENTER: ...
    (microsoft.public.windows.server.sbs)
  • Re: Exchange/ISA Questions
    ... SBS using port 25 for it's SMTP server has ... NAT is not working but this doesn't explain why the telnet to SBS:25 is not ... It should have a command equivalent ...
    (microsoft.public.backoffice.smallbiz2000)

Loading