Re: How do you recover an SBS2003 server with a failed internal NIC
- From: "SuperGumby [SBS MVP]" <not@xxxxxxxxxxx>
- Date: Wed, 20 Dec 2006 08:35:09 +1100
I'm not sure of recovery in your situation, I expect it possible but you
have further complicated your situation by the steps you have taken.
I expect the first indicator of error would have been a long startup time
for the server. Seeing this I would have suspected networking from the start
and having seen the state (thankfully, test system) of a server where
services had 'switched' interface, known I was in for a fun time.
I would not have 'accepted' the condition and attempted to get services up
on the existing NIC, I would have left it as 'external' and either installed
a new NIC or the MS Loopback Adapter to operate as 'internal'. This would
have been performed in Directory Services Restore Mode and I may have
interrupted that first slow reboot to get here.
but where can you go?
1st, I think your remediation steps mean you should continue with the single
NIC for now, throwing another NIC at it now may just confuse things further.
IS ISA involved? If so, remove it. ISA is gonna be confused, installed in
firewall mode but now having only a single NIC.
Check the binding of services. Are DHCP and DNS bound to the NIC? (setting
such services to 'all interfaces' may help)
DNS forward and reverse lookup zones. Explore the whole tree, are all
references to the existing IP framework?
You know the various IP ranges of the NICs during change, search the
registry for references to them. CAREFUL about what you change.
Device manager, are all references to the previous NIC gone?
set devmgr_show_nonpresent_devices=1
start devmgmt.msc
then 'show hidden devices' in the console
Tidy it up as much as possible then again run 'change server IP' and CEICW.
Time to clear and SAVE the logs, restart.
I then go into 'holistic' mode with the event logs and eventid.net. Look at
the logs and start looking up articles. You're not looking to resolve each
error individually, you want to read up on the cause(s) of as many errors as
you are comfortable tracking, looking for similarities, patterns, across the
errors.
"Fisheye" <support@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:%23Eu98A7IHHA.1280@xxxxxxxxxxxxxxxxxxxxxxx
Hi all,
We have just had an experience on our test network (2 NIC's, SBS2003 SP1
Prem) where the internal network card was removed the the server was
booted back up.
What happened was when the server booted, it let the external network card
assume the role of the internal card.
However, the external card has a static IP address, and this messed up all
of the routing.
CIECW was run, along with the Change server IP wizard, which did get the
server in to a semi working state.
However, AD and group policy can not be accessed any more.
Some documentation for disaster recover of this type was found relating to
Server 2003 with ISA, but not SBS2003.
We are not in a critical state, as we have backups and this is a test
network.
But we have no solid recovery solution for this situation in SBS.
Has anyone worked on this issue before? Any references or guides which may
help you could suggest?
Tips of what to look for?
Thanks in advance!
-Jamie
.
- Follow-Ups:
- Re: How do you recover an SBS2003 server with a failed internal NIC
- From: Anna Clark
- Re: How do you recover an SBS2003 server with a failed internal NIC
- References:
- Prev by Date: Re: Stupid Question
- Next by Date: Re: I am open relay
- Previous by thread: How do you recover an SBS2003 server with a failed internal NIC
- Next by thread: Re: How do you recover an SBS2003 server with a failed internal NIC
- Index(es):
Relevant Pages
|
