Re: Big problem with RWW

Tech-Archive recommends: Speed Up your PC by fixing your registry

If all the settings look the same as another SBS install, you may need to
remove/reinstall Companyweb. I'm assuming that you have installed .NET 2.0
on the SBS server.

If you need to reinstall, here's the KB covering removal/reinstall of
Companyweb in SBS 2003...

How to remove and how to install the Windows Small Business Server 2003
SharePoint Services companyweb Web site
http://support.microsoft.com/kb/829114

--
Merv Porter [SBS-MVP]
============================

"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:64CCF1DC-4C62-4BFF-874C-9EFD77791042@xxxxxxxxxxxxxxxx
Hi Clarv,

yes, you are right. Company web is not working and summary e-mails are
probably generated by company web (sharepoint).
I tried compare configuration of companyweb with others installation and I
didn't find any difference :-(( I just tried forbid all IIS services and
restart server and after that check if some application listen on port
8081
(sharepoint port in SBS) and any application listeon on port 8081, 80 nad
443.
How exactly check if problem is in companyweb or how recover companyweb?

Tomas

"clarv02" wrote:

After reading through this thread, I believe the problem is with the
Company Web not running. In Tomas' first post, he mentioned that is was
interesting that the company web had the same problem. With my limited
experience with SBS 2003 and RWW, I do believe that company web must be
working for RWW to work also.

Tomas, have you looked at IIS manager to make sure all the sites are
running, especially Company Web? I think you may find your problem
there.



Tomas Jirak wrote:
"Merv Porter [SBS-MVP]" wrote:

What happens if you re-run CEICW

TJ> it finishs its job success, but without change with my problem

and, in the Web Server Certificate setup
I didn't try generate new certificate, do you mean, that it could help?
(Several users outside this office have installed this certificat to
use
their Outlooks over RPC over HTTPS)

screen, use your external (public) IP address instead of your FQDN?

TJ> Yes I did. I tried https://localhost/remote,
https://127.0.0.1/remote,
https://192.168.1.250/remote and also http://... I wrote evething in my
first
post.
I also wrotte, that it doesn't work http://companyweb ... same result
also summary which is send to administrator with figures of users
e-mails
comes with "Page cannot be found"... it is funny because it is e-mail
and
there is html with Paga cannot be found!!!!

As like I wrote, if you write http://office.procesinvest.cz/remote/ you
are
correctly redirected to https://office.procesinvest.cz/remote/ .... you
can
test it. And I mean, that "Page cannot be found" is genrated by IIS and
no by
IE. You can check it... if you see czech "Page cannot be found" it
means that
is from IIS and not from you english IE.

Tom

Then
try to access RWW via: http://xxx.xxx.xxx.xxx/remote

--
Merv Porter [SBS-MVP]
============================

"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:628A15C8-FBE7-434E-819D-0856F04A0B6E@xxxxxxxxxxxxxxxx
From server yes, from workstation on Monday. It is in czech, but I
think
that
you don't need traslation. If yes I will do it, or you can use
http://slovnik.seznam.cz (simple web translator to my language).

Konfigurace protokolu IP systému Windows

Název hostitele . . . . . . . . . : server
Primární prípona DNS. . . . . . . : procesinvest.local
Typ uzlu . . . . . . . . . . . . : neznámý
Povoleno smerování IP . . . . . . : Ano
WINS Proxy povoleno . . . . . . . : Ano
Prohledávací seznam prípon DNS. . : procesinvest.local

Adaptér síte Ethernet Pripojení k místní síti tohoto serveru:

Prípona DNS podle pripojení . . . :
Popis . . . . . . . . . . . . . . : Broadcom NetXtreme Gigabit
Ethernet
Fyzická Adresa. . . . . . . . . . : 00-30-05-CD-E9-42
Protokol DHCP povolen . . . . . . : Ne
Adresa IP . . . . . . . . . . . . : 192.168.1.250
Maska podsíte . . . . . . . . . . : 255.255.255.0
Výchozí brána . . . . . . . . . . : 192.168.1.254
Servery DNS . . . . . . . . . . . : 192.168.1.250
Primární server WINS. . . . . . . : 192.168.1.250

Tomas

"Merv Porter [SBS-MVP]" wrote:

Can you post an ipconfig /all for the server and for a
workstation?

--
Merv Porter [SBS-MVP]
============================

"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:1D3EC6FC-97F7-428F-8199-908B4F5C893C@xxxxxxxxxxxxxxxx
Hi Merv,

I think that your would be better in my language when most of
the IT
documents are in czech :-)))

Now to your question:
Yes, I am sure, that my router forward all tcp traffic from port
4125
to
SBS
NIC. But I don't know why it is necessary because it doesn't
work from
workstation and server too. (I tried write in my last reply).

Yes again, I run CEICW many times over everytime success and
everytime
it
didn't help with RWW (I speak about https://server/remote, all
other
functionality work). Firewall is not turned on and it cannot be
on
because
in
SBS server is only one NIC (and my knowledge says that in this
situation
SBS
server disallow me turn it on).
I also tried rerun SBS installation without any effect.

And all event logs are fine .... everything is blue only some
rows are
yellow and it means that printer is out off paper :-/

Tomas

"Merv Porter [SBS-MVP]" wrote:

No need to apologize Tomas. I appreciate your efforts to
communicate
in
my
native language. (With my limited language skills, I know this
conversation
would be far more difficult if I were to try to use your
language).
;-)

So, you are saying that in your firewall hardware device, port
4125 is
forwarded to your SBS NIC? And that you have run CEICW on the
SBS
server,
enabled the SBS firewall, selected the RWW service and
completed
CEICW?
Does CEICW complete without errors?

--
Merv Porter [SBS-MVP]
============================

"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:1C738083-CE26-4373-89F8-BE7767D9CC02@xxxxxxxxxxxxxxxx
Sorry for my english.
Yes, I have separate firewall device. SBS has just one NIC
and there
is
not
any firewall.

Tomas

"Merv Porter [SBS-MVP]" wrote:

Sorry, I'm having a little problem understanding your
network
configuration.
Is your "firewall" a separate hardware device?

--
Merv Porter [SBS-MVP]
============================

"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote
in
message
news:91BDC910-0586-4BF8-AA65-8C9A2451DC41@xxxxxxxxxxxxxxxx
Yes, it is and it doesn't work. But I am sure, that
firewall is
not
used
if
you access server from LAN.
What you mean that solve port 4125?

Tom

"Merv Porter [SBS-MVP]" wrote:

OK. So, in the "firewall" configuration (I assume this
is a
router/firewall), port 4125 needs to be forwarded to the
IP
address
of
the
SBS NIC.

--
Merv Porter [SBS-MVP]
============================

"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx>
wrote in
message
news:C4670D2C-B7D4-493F-9029-2FE923E547A3@xxxxxxxxxxxxxxxx
Hi Merv,

it is SBS2003 standard SP1 (it is new installation (4
weeks)
and
it
newer
works ... what I knew)

there is not forwarded port 4125 .... rww doesn't work
either
from
workstation nor from server.

Server has only one NIC and it is behind firewall.

I tested use CEICW and it didn't help. I did it now
again and
there
are
same
problem.

:-((

Tomas

"Merv Porter [SBS-MVP]" wrote:

Hi Tomas,

Is this SBS 2003 (SP1) Standard or Premium (ISA 2000,
ISA
2004?)?

In the router, make sure port 4125 is forwarded to the
IP
address
of
the
SBS
NIC (f a single NIC + router network configuration) or
to the
external
NIC
(if a 2 NIC + router network configuration). Then run
CEICW
again,
enable
the firewall, select the services you want (including
RWW),
set
up
the
Web
Server Certificate and complete CEICW.

--
Merv Porter [SBS-MVP]
============================
"Tomas Jirak" <TomasJirak@xxxxxxxxxxxxxxxxxxxxxxxxx>
wrote in
message
news:BFF20509-EDDF-47FF-A411-97209D1C09E9@xxxxxxxxxxxxxxxxx
Hello,

I have terrible problem with one SBS network. I have
many
experiences
with
SBS2003, but anywhere wasn't problem like this. This
is CZ
version,
but
I
think it doesn't matter.

If I want connect to http://server/remote that pages
are
correctly
redirected to https. It is offered certificate and
after
that
it
showed
"Page
cannot be displayed". There is same behavior from
server,
from
workstation
and from outside.

It is interested that root of web server works and
http://server/exchange
works too without any problem. I tried check if some
application
is
not
on
port 80, 443 or 8081 and there is not any conflict.
Interested is that same problem is on
http://companyweb
(from
server
and
from workstation too).

I tried re-run wizard for setting internet on SBS,
but it
doesn't
help.
I
tried in this wizard everything block and again
allow and
it
doesn't
help
too. I tried (in despair) re-run installation of SBS
(functional
overlay)
and
only one thing was changed - disk quota was turn on
back
:-(

RPC over HTTPS and VPN works fine.
I checked access permission to c:\inetpub\remote and
there
are
same
like
on


.

Relevant Pages

  • RE: Sharepoint Service, company web reinstallation
    ... Welcome to SBS newsgroup. ... I understand that you want to reinstall the companyweb on your SBS 2003 ... Business Server 2003 (If you are in the middle of RC to RTM upgrade, ... If AV software install any extra IIS virtual directory, ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS2003R2 Sharepoint Web Part Error (new post)
    ... server crashed every few hours. ... processor have we seen problems in in SBS ... companyweb site, I suggest we perform the following steps one by one to ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: How do I reinstall setup.exe file for clients in server?
    ... Deployment on SBS to rebuild client setup application. ... We need to select "Windows Small Business Server 2003" but not ... | installation was made late September. ...
    (microsoft.public.windows.server.sbs)
  • Re: Server/Network setup question
    ... By performing a full installation yourself, looking at what you may wish to ... IP Address/mask, same subnet as router. ... An SBS installation is complete _ONLY_ after all items in the ... My server is coming with SBS pre-installed. ...
    (microsoft.public.windows.server.sbs)
  • Re: Two server in one domain
    ... You cannot install SBS components on anything but SBS. ... I've succed to combine our server. ... Is it true I must installed from Cd Installation of Windows SBS 2003? ... If remote how are the sites linked? ...
    (microsoft.public.windows.server.sbs)