Re: RWW: version=1 msgtype=status status=-3 message=Password Inco

Hi Shawn,

Can you double check your router and see if that is configured for remote
access through port 443? If yes, turn off that remote access or change the
port to something else. I think the certificate is from your router.
Do not change anything manually in IIS regarding the certificate. It SHOULD
show the publishing there.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53

"Shawn O'Connor" <ShawnOConnor@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
news:64C77AA4-1E44-4862-9D41-6DD8ADBE2D85@xxxxxxxxxxxxxxxx
Doing a little more research, I found a post in Google that was handled
through this newsgroup last year that seems very similar to this issue.
Unfortunately the thread does not seem to be complete. Perhaps someone at
Microsoft has some more complete info on this? See below:


http://groups.google.com/group/microsoft.public.windows.server.sbs/browse_thread/thread/ed466c927b150e4b/15610870b46b9369?lnk=st&q=rogue+certificate&rnum=1&hl=en#15610870b46b9369

"Shawn O'Connor" wrote:

By the way, as was posted earlier -- I AM running ISA 2004 on this
server.

Thanks,

--Shawn


"Shawn O'Connor" wrote:

Steve,

I checked everything you said to check. All was set the way it is
supposed
to be.

I reset the IUSR accounts and ran the cscript administrative scripts.
Reset
IIS and tried once more -- same error message.

What's next? --Thanks.

"Shawn O'Connor" wrote:

Marina -- I tried emailing you from my yahoo account but I got the
following
error message: "Sorry, I couldn't find any host named
roos.nodontwantspam.nl.com".

I'll post back with the results from Steven's suggestions.

Thanks again.

--Shawn





.

Relevant Pages

  • Re: VPN
    ... > Router gets allocated an IP by the service provider, ... > should be able to use it to gain access to the server? ... > When I am setting up the ports in the Routing and Remote Access panel, ... > the Configure Device dialog for each port I have to specify an IP address. ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN
    ... >> Router gets allocated an IP by the service provider, ... >> When I am setting up the ports in the Routing and Remote Access panel, ... >> the Configure Device dialog for each port I have to specify an IP ...
    (microsoft.public.windows.server.sbs)
  • Re: AS400 Remote Access help
    ... Data Transfer...does that run off port 23 as well?? ... >> I have it at home, wired into a Linksys WRT54G wireless router. ... >> remote access while traveling. ... > anywhere on the Internet regardless of how often your IP address changes. ...
    (comp.sys.ibm.as400.misc)
  • VPN
    ... I'm setting up the server for remote access from a home computer, ... Router gets allocated an IP by the service provider, ... What port forwarding options do I have to set up on the router? ...
    (microsoft.public.windows.server.sbs)
  • Re: Using Remote Desktop From an SBS Domain
    ... when you tried to RDP while attached directly to a port on your router? ... So if 3389 needs forwarded on the client end too then that is what the ... Hopefully next week I can attempt a connection while my ISP watches the ...
    (microsoft.public.windows.server.sbs)