Re: company web, monitoring is not loading on SBS2003 R2

Hi,

i have got a simular problem with a customer - dell server using the onboard
cards - if you look a few posts down you will see my post companyweb stops
working after ISA2004 installed.

Again like SQ the server came pre-installed - assuming dell used their
installation script - however i don't want to do a reinstall - as this is a
live server.

Have you managed to find out anything else?

i have built a test system and i got the same isuues but once i changed the
network card it started working - re enabled the internal broadcom and now
it's working!! i may have to visit my customer and try!!

if you have found anything that would be of a great help.

Pete

"Claus" wrote:

I have used their setup assistant (similar to the Dell assistant) without an
issue but I prefer to do it without it. Sometimes you run into a mix-up with
the dual NIC setup. You can avoid that by stopping the installation after
the OS setup, verifying the names on the 2 NICs and the proper IP addresses.
Then continue with the rest of the SBS setup. The CDs versus DVD - I prefer
the CDs but that's just me.

--
Claus
"SQ" <SQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:827DEDF4-A5C1-4052-99E9-8B1D665FDBFA@xxxxxxxxxxxxxxxx
I am wondering if these problems were caused by the HP setup assistant?
I used their software to start the boot process into the installation. I
also had a problem during the installation with one of the setup CD's,
Disk2
locked the system. I might pick up an inexpensive DVD drive so that I can
install from the DVD media instead via multiple CD's.

Thanks,

Steven

"Claus" wrote:

SQ,

Given that this box is not in production yet, I think a clean new install
would be a good exercise. You can also uninstall and reinstall
SharePoint.
But in your case I would start from scratch.

--
Claus
"SQ" <SQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:944FE3B9-B525-4D56-B526-B9E59FA61DE6@xxxxxxxxxxxxxxxx
Hi Claus,

Sorry for the delay in getting back to you.
The system is not showing any critical services that are stopped.
The web service is also running, so I am wondering if I just need to
reinstall the OS?

Here are service errors that I have found in the system:
Event Type: Warning
Event Source: SQLAgent$SBSMONITORING
Event Category: Alert Engine
Event ID: 312
Date: 11/16/2006
Time: 3:14:16 PM
User: N/A
Computer: SBS2003
Description:
Successfully re-opened the local eventlog - NOTE: Some events may have
been
missed.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Event Type: Error
Event Source: POP3 Connector
Event Category: Download
Event ID: 1019
Date: 11/19/2006
Time: 2:15:32 PM
User: N/A
Computer: SBS2003
Description:
The message download process finished with one or more errors.

Event Type: Information
Event Source: NtFrs
Event Category: None
Event ID: 13516
Date: 11/16/2006
Time: 10:15:52 AM
User: N/A
Computer: SBS2003
Description:
The File Replication Service is no longer preventing the computer
SBS2003
from becoming a domain controller. The system volume has been
successfully
initialized and the Netlogon service has been notified that the system
volume
is now ready to be shared as SYSVOL.

Type "net share" to check for the SYSVOL share.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.


Thank you for your help.

SQ

"cjobes" wrote:

Behavior for Performance Logs is normal. It only starts when needed.
Alerts?? do you mean Alerter? That should be disabled.

If you want me to help you, you need to give me the info I ask for.
You
didn't tell me anything about your event logs. any errors? (ErrorIds,
source, description).

--
Claus
"SQ" <SQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:72F0BB6F-A7D7-466F-9791-4F44DC411218@xxxxxxxxxxxxxxxx
Performance Logs and Alerts Service Starts and then stops.

SQ

"cjobes" wrote:

You didn't answer my other questions. What errors did you get?
Check
the
event logs. Under the services, do you see any services that are
set
to
automatic and are not running?

--
Claus
"SQ" <SQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:71C1CCC1-8EFB-4BC6-96E1-27C247D49E9A@xxxxxxxxxxxxxxxx
I changed the WINS Server Info, and ran CEICW but it hasn't
resolved
the
issue.

SQ

"cjobes" wrote:

Your WINS server on the LAN NIC should be 192.168.2.2. Rerun the
CEICW.
Do
you get any errors? Are any services that should start
Automatically
not
running? Do you see any errors in the event logs?

--
Claus
"SQ" <SQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:15DBFC62-436C-4D4E-9EBA-AB7292631B23@xxxxxxxxxxxxxxxx
I have just installed SBS 2003 R2 on a new HP ML350 G4 with 2
Nics,
most
of
the installation has been fine except companyweb will not run
on
the
server
or on the test workstation. I have also noticed that
monitoring
is
also
not
working in server management. I am almost positive that it is
an
IP
configuration issue.

The company has a Netopia IDSL Router with 5 static IP
addresses.
One
static ip routes directly to the Network Nic. The server is
able
to
go
online.

Here is the IPCONFIG info from the server
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.

C:\Documents and Settings\Administrator>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : sbs2003
Primary Dns Suffix . . . . . . . : csb.lan
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : csb.lan

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7761 Gigabit Server
Adapter
Physical Address. . . . . . . . . : 00-17-A4-A5-A7-11
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.2.2
Primary WINS Server . . . . . . . : 192.168.1.2

Ethernet adapter Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7771 Gigabit Server
Adapter
Physical Address. . . . . . . . . : 00-17-A4-3E-96-89
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 66.167.3.248
Subnet Mask . . . . . . . . . . . : 255.255.255.248
Default Gateway . . . . . . . . . : 66.167.3.241
DNS Servers . . . . . . . . . . . : 192.168.2.2
NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Documents and Settings\Administrator>

Any help will be appreciated.

Thank you,

SQ















.

Relevant Pages