Re: CEICW fails - several errors

First you need to get you DNS configuration right.
On the WAN NIC of your server the DNS has to point to the LAN IP. No other
DNS entries should be there. The ISP assigned DNS addresses go into the
Forwarders. If you run the CEICW and answer the questions correctly, it will
put them for you in the right spot. Make those changes and try the CEICW
again.

--
Claus
<johnbrown105@xxxxxxxxxxx> wrote in message
news:1163467248.602843.33270@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hello All,

You must be tired of all the posts about CEICW, but don't be mad at me.
I didn't make SBS 2003. Anyway, some background,,,

A user reported that her e-mails sent via her Exchange accout in MS
Outllok 2003 were not going through. The Event logs showed SMTP errors
(could not bind to domain in DNS). I ran Windows Update and installed
the latest service packs for ISA Server 2000 and Exchange. The mail
still was not going through so I decided (why, oh why???) to run CEICW
and everything got messed up. I eventually got web browsing working
again, but only web browsing. I cannot send or receive e-mail in
Outlook Express (small company, no static IP address or domain name -
one main e-mail address, departments will share a few e-mail addresses
that are included with our ADSL account). I tried uninstalling Exchange
and ISA Server and re-installing from the CD, but that did not help.

The lines with errors from icwlog.txt are:
Error 0x1 returned from call to Setting the default gateway on the
external NIC().
Error 0x1 returned from call to RegisterMSBOExchangeBP().
Error 0x80070003 returned from call to Publishing companyweb().
Error 0x80070003 returned from call to Committing Web publishing
rules().
Error 0x80070003 returned from call to CCometCommit::Commit().
calling ADsGetObject (LDAP://jmiserver.JMINET.local/CN=SmallBusiness
SMTP connector,CN=Connections,CN=first routing group,CN=Routing
Groups,CN=first administrative group,CN=Administrative
Groups,CN=JMINET,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=JMINET,DC=local, IADs,
0x6f418).
/* these lines included for context; _RestartService() loks generic) */
Call to ADsGetObject () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling spADs->SetInfo ().
Call to spADs->SetInfo () returned ok.
calling _RestartService (RESvc, 1).
/***************************************************************/
Error 0x8007041d returned from call to _RestartService().
Error 0x8007041d returned from call to EnableSMTPConnector().
Error 0x8007041d returned from call to CEMailCommit::Commit().

Windows IP Configuration

Host Name . . . . . . . . . . . . : jmiserver
Primary Dns Suffix . . . . . . . : JMINET.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : JMINET.local

Ethernet adapter Internal Local Area Connection:

Connection-specific DNS Suffix . : JMINET.local
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
Ethernet
NIC
Physical Address. . . . . . . . . : 00-20-ED-64-E6-F6
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.3
Primary WINS Server . . . . . . . : 192.168.0.3

Ethernet adapter Internet Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139 Family PCI Fast
Ethernet
NIC #2
Physical Address. . . . . . . . . : 00-48-54-6C-7C-2E
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.1
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 10.0.0.138
/*
DNS manually assigned by me since all of this. I read these numbers in
the ADSL modem's web browser interface. I used to have 10.0.0.138 as
the only DNS server, and it was working
*/
DNS Servers . . . . . . . . . . . : 208.131.176.126
208.138.33.250
NetBIOS over Tcpip. . . . . . . . : Disabled

I just need CEICW to terminate normally so that SMTP and POP3 will
start working again, and I will tackle the problem of Exchange not
delivering SMTP mail another time.

Any help will be greatly appreciated.



.

Relevant Pages

  • Re: Cannot connect to RWW from home PC
    ... You say "And in the router you need to forward to your external nic IP" ... You say "You need the domain hoster to setup a DNS record that will be ... We have rerun CEICW sort of hoping it would sort out the router but no ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: Help! w/ Upgrade-Installation problems with OMA/ActiveSync and
    ... Am I misinterpreting the summary doc from CEICW re: dhcp and dns settings ... under the SBS DNS forwarder tab. ... DNS server addresses I assume from the DSL modem. ...
    (microsoft.public.windows.server.sbs)
  • RE: Cannot connect to Internet, DHCP Server Error
    ... and whether the DNS issue is related to the original CEICW issue? ... >DNS Forward Lookup zone contains _msdcs.domain.local and domain.local ... >>Firewall/Internet Sharing Connection service on the SBS 2003 server. ...
    (microsoft.public.windows.server.sbs)
  • Re: CEICW Network Error
    ... Both LAN and WAN point to 192.168.0.2 for DNS and in CEICW I identify the ... ISP DNS servers and have confirmed that they are the forwarders in the DNS ... Server service can then be told to use the router (if it acts as DNS ...
    (microsoft.public.windows.server.sbs)
  • Issues migrating SBS 2003 domain to Server 2008 Standard
    ... We are stuck migrating our SBS 2003 domain to Server 2008. ... Fatal Error:DsGetDcName (SRV-EXCH) call failed, ... Verify your Domain Name Sysytem (DNS) is ... network connectivity to a domain controller. ...
    (microsoft.public.windows.server.sbs)